Sharp VC-M333 (serv.man5) User Manual / Operation Manual ▷ View online
12
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
Before you start!
•
If
appears on the VCR display, press
TIMER ON/OFF
to remove the
symbol.
•
Check that the VCR clock is displaying the correct time.
VIDEOPLUS+ allows you to program the VCR to record up to eight programmes using the
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
1.
Press the
PLUSCODE
button on the remote
control.
2.
Enter the VIDEOPLUS+ number from the TV
listing using the
listing using the
NUMBER BUTTONS
.
NOTE:
3.
Press the [
/
] menu select buttons to select ONCE,
WEEKLY, DAILY.
4.
If you want to make additional recordings at the same time
each day or week, then use
[
/
]
to select the WEEKLY,
or DAILY option as appropriate.
5.
Press
SET
to confirm.
NOTE:
The first time that you use VIDEOPLUS+ to make a
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
6.
Enter the channel you wish to record using
the
the
NUMBER BUTTONS
, for example if
you wish to record channel 2 press
0 2
. The
VCR will remember this for the future.
See next page to continue
•
An ERROR message will appear if you have entered a number that is not a current
VIDEOPLUS+ number. If this happens press
VIDEOPLUS+ number. If this happens press
CLEAR
to delete the numbers as required
and enter the correct VIDEOPLUS+ number
•
Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR
to return to the VIDEOPLUS+ menu, and re-enter the correct VIDEOPLUS+
number
→
P L U S COD E .
-
ONC E
WE E K L Y
DA I L Y
MENU SELECT BUTTONS
Remote
Control
Control
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
P R
: BBC 2
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
TINS-3809UMZZ ENGLISH.book Page 12 Monday, April 3, 2000 2:03 PM
13
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
7.
If your VCR has long play facility and you wish
to change the
RECORDING SPEED
, use
the
[
/
]
to highlight SP. Press [
/
]
to select standard play (SP) or long play (LP)
as required.
8.
[See
NOTE
below]. For VPS/PDC setting use
[
/
]
to highlight the final column. Using
the [
/
] will select VPS/PDC ON or OFF
(
✱
= ON
-
= OFF).
9.
Press
SET
to confirm the programme. The
VIDEOPLUS+ menu will reappear. If you wish
to enter further VIDEOPLUS+ recordings
repeat this procedure.
10.
When you have completed entering timer
settings, press
MENU
to remove the menu
from the TV screen.
11.
Ensure that the tape on which you wish to
record is inserted into the VCR, then press
TIMER ON/OFF once to place the VCR in
TIMER POWERSAVE/TIMER STANDBY mode.
will be shown on the display.
NOTES:
•
You may also access the VIDEOPLUS+ menu by the following procedure:
i.
Press
MENU
.
ii.
The VIDEOPLUS+ option will be highlighted. Press
SET
to confirm.
Continue from step 2 above.
•
VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
•
If
flashes a video tape has not been inserted into the VCR.
•
If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
been removed.
•
During recording, press
STOP
(
) to cancel the recording. If there are further
recordings to be made, the VCR will return to TIMER POWERSAVE or TIMER STANDBY.
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P
*
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
T A P E
S P E E D :S P / L P
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P
-
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
V P S / P DC
✱ : ON - : OF F
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
TINS-3809UMZZ ENGLISH.book Page 13 Monday, April 3, 2000 2:03 PM
14
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
You can make a maximum of eight delayed recordings up to a year in advance.
The example shown is for 24-hour clock operation. To change to12-hour clock operation refer
to
The example shown is for 24-hour clock operation. To change to12-hour clock operation refer
to
MANUALLY SETTING THE CLOCK
section of this manual.
12-hour clock am/pm can be selected using the
AM/PM
button on the remote control.
Before you start!
•
If
appears on the VCR display, press
TIMER ON/OFF
to remove the
symbol.
•
Check that the VCR clock is displaying the correct time.
SETTING A RECORDING
For example: Recording a programme on channel 3 from 21:05 to 22:30 on July 9th.
1.
Press
STOP
(
) to ensure that the VCR is
switched on.
2.
Press the
MENU
button
.
3.
Press the [
/
] menu select buttons to
select
TIMER
. Press
SET
to confirm.
4.
Press
SET
again, the on-screen display will now
show today’s date.
If you wish to change the date use the
[
If you wish to change the date use the
[
/
] or the
NUMBER BUTTONS
. Enter
two digits for the day, then two for the month.
For example for July 9th, press
For example for July 9th, press
0 9
(9th), then
0
7
(July).
When the correct date for your recording is
shown, press the
shown, press the
menu select button to move
to the next setting.
5.
If you want to make additional recordings at
the same time each day or week, use
[
the same time each day or week, use
[
/
] to select D (daily) or W (weekly).
Then press
to move to the next setting.
6.
Enter the channel number using the [
/
]
or the
NUMBER BUTTONS
. For example to
record a programme on channel 3, press 0 3.
Then press
Then press
to move to the next setting.
MENU SCREEN
V I D EOP L U S +
T I ME R
MOD E
S E T U P
: S E L EC T
S E T
: E N T E R ME NU : E X I T
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7
D
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
MENU SELECT BUTTONS
Remote
Control
Control
TINS-3809UMZZ ENGLISH.book Page 14 Monday, April 3, 2000 2:03 PM
15
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
7.
Enter the start time using the [
/
] or the
NUMBER BUTTONS
, hours first then
minutes (when entering less than 10 hours or
minutes add a '0' before the number), for
example for 21:05 start, press
minutes add a '0' before the number), for
example for 21:05 start, press
2 1 0 5
.
Then press
to move to the next setting.
8.
Enter the stop time, for example for 22:30 stop,
press
press
2 2 3 0
.
9.
If your VCR has long play facility and you wish to
change the
change the
RECORDING SPEED
, use the
[
/
]
to highlight SP. Press [
/
] to
select standard play (SP) or long play (LP) as
required.
required.
10.
[See note below]. For VPS/PDC setting use the
[
/
]
to highlight the final column.
Using the [
/
] will select VPS/PDC ON or
OFF (* = ON - = OFF).
11.
Press
SET
to confirm.
•
The MENU now shows all the timer settings you
have entered. If you wish to make additional
timer recordings, repeat this procedure.
have entered. If you wish to make additional
timer recordings, repeat this procedure.
12.
When you have completed entering timer
settings, press
settings, press
MENU
to remove the menu
from the TV screen.
13.
Ensure that the tape on which you wish to
record is inserted into the VCR, then press
record is inserted into the VCR, then press
TIMER ON/OFF
once to place the VCR in
TIMER POWERSAVE/TIMER STANDBY mode.
will be shown on the display.
NOTES:
•
VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
•
If
flashes a video tape has not been inserted into the VCR.
•
If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
been removed.
•
During recording, press
STOP
(
) to cancel the recording. If there are further
recordings to be made, the VCR will return to TIMER POWERSAVE/TIMER STANDBY.
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7 D 0 3
2 1 : 0 5
- : - -
S P *
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7 D 0 3
2 1 : 0 5
- : - -
L P
*
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
9 / 0 7 D 0 3
2 1 : 0 5
2 2 : 3 0
L P
-
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
TINS-3809UMZZ ENGLISH.book Page 15 Monday, April 3, 2000 2:03 PM
Click on the first or last page to see other VC-M333 (serv.man5) service manuals if exist.