Sharp VC-M333 (serv.man4) User Manual / Operation Manual ▷ View online
3
If problems persist contact the SHARP Helpline on tel: 0990-274277
BEFORE USING YOUR VCR
UNPACKING THE ACCESSORIES
To fit the batteries into the remote control
Remove the battery cover on the back of the remote control.
Fit the batteries:
to
and
to
. terminals. Place the
battery cover back into position.
CHECK ALL THESE ACCESSORIES ARE SUPPLIED WITH YOUR VCR. CONTACT YOUR DEALER IF
ANY ARE MISSING.
ANY ARE MISSING.
(TYPE AA/R6/UM3)
BATTERIES (X2)
BATTERIES (X2)
for the remote control unit.
RF CONNECTION CABLE
connects the VCR to the TV.
Remote Control
•
Remote Control must be pointed towards the VCR to operate.
•
Do not expose to liquid or shock.
•
May not function if the VCR is in direct sunlight or any other strong light.
•
Replace both alkaline batteries (type AA/R6/UM3) if the remote control
fails.
fails.
•
Remove the batteries and keep in a safe place if you do not plan to use
the VCR for several months.
the VCR for several months.
•
Remove and dispose of flat batteries safely and promptly.
•
Incorrect use of batteries may cause them to leak or burst.
REMOTE
CONTROL
For a more
detailed
picture of
your remote
control refer
control refer
to page (ii).
Battery cover
TINS-3809UMZZ ENGLISH.book Page 3 Monday, April 3, 2000 2:03 PM
4
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
CONNECTING THE CABLES
✔
The VCR is correctly connected.
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LINE1(I)IN
/OUT
SON/VIDEO
(L1/I)
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LINE1(I)IN
/OUT
SON/VIDEO
(L1/I)
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LINE1(I)IN
/OUT
SON/VIDEO
(L1/I)
AERIAL OR
CATV CABLE
CATV CABLE
Optional:
Connect your
Satellite receiver or decoder to
the VCR using a scart lead to
the VCR using a scart lead to
LINE 2 IN/DECODER
socket on the VCR.
Connect your existing aerial
cable to the
cable to the
ANTENNA IN
socket on your VCR.
DECODER UNIT
OR SATELLITE SYSTEM
OR SATELLITE SYSTEM
1
2
3
Connect your TV to the VCR using the
supplied RF connection cable, i.e.
connect the VCR
supplied RF connection cable, i.e.
connect the VCR
RF OUT
socket to
the TV
AERIAL IN
socket.
Connect the VCR
to the mains.
to the mains.
BACK OF
TELEVISION
TELEVISION
Optional
SCART (not supplied). If you
have a scart lead connect it to your TV and
LINE 1 IN/OUT
socket on the VCR.
- The advantage of a Scart connection is
improved picture and sound quality during
playback.
improved picture and sound quality during
playback.
TINS-3809UMZZ ENGLISH.book Page 4 Monday, April 3, 2000 2:03 PM
5
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
1.
Press the
STANDBY
button to ensure your VCR is in the STANDBY mode.
2.
Press and hold the
button located on VCR front panel for 3 seconds.
The VCR will search and display an ideal
channel.
Wait for the flashing channel number to appear
on the VCR display.
channel.
Wait for the flashing channel number to appear
on the VCR display.
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer
to RF through ON/OFF below.
to RF through ON/OFF below.
3.
Switch on the TV.
4.
Select the next available or unused channel on your TV, this will become the dedicated
video channel.
video channel.
Example of
TV channels
TV channels
5.
Tune the selected channel on your TV until the screen below appears.
Store this as your VCR channel. (Refer to your TV manual for instructions on how to tune in
your TV).
your TV).
6.
Press the
button to place the VCR back into STANDBY. (The MENU screen will not be
displayed when the VCR is in STANDBY mode.)
NOTES:
•
If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 2 using [
Step 2 using [
/
] keys.
RF THROUGH ON/OFF:
•
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your
VCR can be turned OFF and ON by pressing the
VCR can be turned OFF and ON by pressing the
CLEAR
button then
SET
to return to
STANDBY at point 2. This will help minimise interference.
1 = BBC1
4 = Channel 4
2 = BBC2
5 = Channel 5
3 = ITV
? = VCR
MENU SCREEN
ME NU
V I D EOP L U S
T I ME R
T I ME R
MOD E
S E T U P
: S E L EC T
S E T
: E N T E R
ME NU : E X I T
Example
(Blue background
with white text)
TINS-3809UMZZ ENGLISH.book Page 5 Monday, April 3, 2000 2:03 PM
6
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
AUTO INSTALLATION
These models automatically tune the TV channels for your area, then using Teletext
information sort the TV channels into a standard order and set the clock.
information sort the TV channels into a standard order and set the clock.
Turn the TV on and select the video channel. (As previously explained).
1.
Press
STOP
to switch on the VCR.
2.
Follow the instructions that appear on the TV screen by pressing the
SET
button. (Auto
tune may take a few minutes)
NOTE:
•
If the AUTO INSTALLATION screen doesn’t appear when you switch on your VCR or you
wish to reset your VCR and start the installation again, refer to
wish to reset your VCR and start the installation again, refer to
VCR RESET
at the back
of the book.
P L E A S E
B E
S UR E
T H E
A E R I A L / S CAR T
CAB L E I S
CONN E C T E D T O YOUR V CR .
P R E S S
P R E S S
S E T
T O CON T I NU E
S E T
: E N T E R ME NU : E X I T
AU T O
I N S T A L L A T I ON
P R E S S
S E T
K E Y
T O S T AR T
S E T
: E N T E R ME NU : E X I T
Press the
SET
button.
1
CH 2 2
AU T OMA T I C
SOR T I NG .
P L E A S E WA I T .
S E T
: E N T E R ME NU : E X I T
Press the
SET
button.
See next page to continue
SET
STOP
REMOTE
CONTROL
CONTROL
Button positions for your reference.
TINS-3809UMZZ ENGLISH.book Page 6 Monday, April 3, 2000 2:03 PM
Display
