Sharp MX-FR18U (serv.man5) Service Manual / Technical Bulletin ▷ View online
1/2
ROM version upgrade ... (1)
1. Model Name
MX-FR17U/FR18U (Option for MX-M260 Series/M310 Series)
2. Description
MCU, PCL and FAX-ROM version upgrade
Executed from the production in January, 2010
Model Name
MCU
IMC
PCL
FAX
MX-FR17U
V30.10
V35.00
V30.10 V30.10
MX-FR18U V30.00
Changes: Refer to the attached sheet.
Sharp Electronics (UK) Ltd., Document Systems Support
TECHNICAL BULLETIN
Date:
19
th
April 2010
Model:
MX-FR17U/FR18U
Ref.:
DCE796
Colour:
White
Page:
1 of 2
2/2
3. Changes
No Item
Description
1 UI relation
If the screen is switched when the delivery tray is full, the delivery tray full indicator flashes. This
problem is fixed.
problem is fixed.
2 Main unit control
If toner end occurs when performing staple sort copying, a message prompting removal of the
paper in the staple compiler appears after replacing toner, and the staple job is not resumed.
This problem is fixed.
paper in the staple compiler appears after replacing toner, and the staple job is not resumed.
This problem is fixed.
3 Main unit control
After the staple job is stopped by pressing the [STOP/DELETE] key with the paper in the
compiler and the paper feed tray is opened and closed, the job is not resumed even if the
[CANCEL] key is pressed. This problem is fixed.
compiler and the paper feed tray is opened and closed, the job is not resumed even if the
[CANCEL] key is pressed. This problem is fixed.
4 FAX relation
If printing is executed through the protocol monitor after changing the destination and softswitch,
the FAX firmware supporting the security kit hangs up after completing communication.
the FAX firmware supporting the security kit hangs up after completing communication.
5 Printer relation
If the unit is left stopped after paper runs out and paper is loaded with the fusing unit cooled, the
unit remains off-line and the job is not resumed. This problem is fixed.
unit remains off-line and the job is not resumed. This problem is fixed.
6 E-mail alert relation
If "F1-15" trouble occurs when setting the E-mail alert, the E-mail alert is sent; however the
trouble code is not listed in the text. This problem is fixed.
trouble code is not listed in the text. This problem is fixed.
7 List print relation
If the FAX setting list is printed when the delivery tray is full, a message prompting removal of the
delivered paper appears, and hang-up occurs. This problem is fixed.
delivered paper appears, and hang-up occurs. This problem is fixed.
8 Simulation relation
For the printing position adjustment when copy two-sided printing by the simulation, a change
has been made so that the printing positions of the front and back sides can be easily adjusted.
has been made so that the printing positions of the front and back sides can be easily adjusted.
9 Simulation relation
A check item for the sensor (FPLS) of the inner finisher added as a countermeasure against jam
during stapling has been added to SIM3-2.
during stapling has been added to SIM3-2.
10 Soft SW relation
A change has been made so that the display timing of the message appearing when the drum
and developer reach the life cycle can be selected by the soft SW.
Sim55-1 Soft SW 4-6
and developer reach the life cycle can be selected by the soft SW.
Sim55-1 Soft SW 4-6
0: The life is determined by the counter or running distance.
(Conventional display: Default)
1: The life is determined by the counter only.
11 Others
Flash ROM made by MACRONIX can be used.
Sharp Electronics (UK) Ltd., Document Systems Support
Display
