Sharp VC-M333 (serv.man5) User Manual / Operation Manual ▷ View online
24
If problems persist contact the SHARP Helpline on tel: 0990-274277
SPECIAL FEATURES ON YOUR VCR
POST CODE SECURITY
This feature should allow the Police to identify you as the owner of the VCR if it is stolen. Each
time the VCR is turned on your postcode will be displayed for 5 seconds. Your postcode
cannot be changed or removed without first entering the correct PIN - number.
time the VCR is turned on your postcode will be displayed for 5 seconds. Your postcode
cannot be changed or removed without first entering the correct PIN - number.
If you wish to use this function, follow the procedure below.
1.
Press
MENU
.
2.
Press the [
/
] menu select buttons to
select SET UP. Press
SET
to confirm.
3.
Press [
/
] to select POST CODE. Press
SET
to confirm.
4.
Enter your desired PIN number using the
NUMBER BUTTONS
or the [
/
]
buttons. This must be a 4 digit number in the
range
0000 - 9999.
range
0000 - 9999.
5.
Using the [
/
/
/
]
buttons, enter your
Postcode. Press
SET
to confirm.
6.
Record your PIN number in the box provided
for future reference.
for future reference.
NOTE:
If you wish to change your PIN number at any time:
1.
Follow steps 1 to 3 above.
2.
Enter your current PIN number. Press
SET
to confirm
3.
Press
to re-select PIN number.
4.
Enter your new PIN number. Press
SET
to confirm.
IMPORTANT:- Please keep your Operation Manual separate from your
VCR.
VCR.
•
Your Postcode can be changed at any time, but you must first enter your correct PIN
number. If the wrong PIN number is entered, an ERROR message will appear. Re-enter
the correct number.
number. If the wrong PIN number is entered, an ERROR message will appear. Re-enter
the correct number.
POS T COD E
P I N NUMB E R
POS T COD E
- - - - - - - - - - -
S E L E C T :
CHANGE
E N T E R : S E T E X I T : ME NU
MENU
SET
CLEAR
DISPLAY
C
PLUSCODE
MODE OSD
TIMER
ON/OFF
AUDIO
OUT
SKIP
SEARCH
ZERO
BACK
BACK
2
3
1
4
7
5
8
6
9
Remote Control
TINS-3809UMZZ ENGLISH.book Page 24 Monday, April 3, 2000 2:03 PM
25
If problems persist contact the SHARP Helpline on tel: 0990-274277
SPECIAL FEATURES ON YOUR VCR
POWERSAVE MODE
ENABLING POWERSAVE MODE
If you wish to use the POWERSAVE feature, it can be switched on within the Mode Menu
Screen, this will automatically disable the STANDBY mode.
Screen, this will automatically disable the STANDBY mode.
1.
Press
MENU
to display the main menu on the
screen.
2.
Press the [
/
] menu select buttons to
select MODE.
3.
Press
SET
.
4.
Press [
/
] to select POWERSAVE.
5.
Press [
/
]to select ON.
6.
Press
SET
and then
MENU
to return to the normal screen.
Press
STANDBY
(
) to place the VCR in POWERSAVE mode. The VCR digital display will
flash save for 5 seconds and will then appear blank.
The VCR power consumption will now be below 1.5 Watt. i.e., The VCR is now in the
POWERSAVE MODE.
POWERSAVE MODE.
AUTO POWERSAVE
If the VCR is not operated for more than 3 hours, the VCR will go into POWERSAVE mode and
the digital display will appear blank.
the digital display will appear blank.
DISENGAGING POWERSAVE MODE
Press
STOP
(
) to use the VCR. (Other keys may also disengage POWERSAVE, such as the
CHANNEL
/
).
STANDBY MODE
The POWERSAVE feature must be OFF for the STANDBY mode to function. This will allow viewing
through the VCR without AUTO POWERSAVE operating. Press
through the VCR without AUTO POWERSAVE operating. Press
STANDBY
(
) to place the
VCR in standby mode.
DISENGAGING STANDBY MODE
Press
STOP
(
) to use the VCR.
NOTES:
•
POWERSAVE mode will not operate when CHILDLOCK is engaged
•
POWERSAVE/STANDBY will operate after auto rewind and cassette will eject.
•
POWERSAVE/STANDBY will operate when TIMER is on.
•
STANDBY will only operate when POWERSAVE is disabled.
•
POWERSAVE will not operate if disabled via the MODE screen.
MODE MENU SCREEN
N I CAM
AU T O
O F F
CO L OUR
AU T O
P A L ME S E CAM
B L U E MU T E
AU T O
O F F
R E P E A T
ON
O F F
➝
POWE R S A V E
ON
O F F
TINS-3809UMZZ ENGLISH.book Page 25 Monday, April 3, 2000 2:03 PM
26
If problems persist contact the SHARP Helpline on tel: 0990-274277
SPECIAL FEATURES ON YOUR VCR
CHILD LOCK
You can lock your VCR with this feature. It will work even when the VCR is in POWERSAVE/
STANDBY, preventing children from operating the VCR.
STANDBY, preventing children from operating the VCR.
TO ENGAGE CHILD LOCK
Press and hold
on the remote control for about 2 seconds.
flashes and then
remains lit on the VCR display confirming that CHILD LOCK
has been activated.
Regardless of what other operating buttons are touched, the VCR will continue to operate in
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
TO DISENGAGE CHILD LOCK
Press and hold
for about 2 seconds.
starts flashing and then disappears. CHILD LOCK is disengaged.
NOTES:
•
If you attempt to change modes by pressing another button while CHILD LOCK is on,
the
the
indicator will flash on the VCR display.
•
If power is interrupted for more than 60 seconds (due to power failure etc), CHILD LOCK
may disengage.
may disengage.
TINS-3809UMZZ ENGLISH.book Page 26 Monday, April 3, 2000 2:03 PM
27
If problems persist contact the SHARP Helpline on tel: 0990-274277
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
It should not be necessary to tune in a broadcast channel manually except in unusual
circumstances such as poor signal.
circumstances such as poor signal.
To manually tune in a channel follow the procedure below.
1.
Press
MENU
.
2.
Press the [
/
] menu select buttons
to select SET UP. Press
SET
to confirm.
3.
CHANNEL PRESET
will be
highlighted. Press
SET
.
4.
Press [
/
] to select
CHANNEL
.
5.
Press
[
/
]
to start tuning in either
direction. Tuning will stop when a channel
is received. If it is not the desired channel,
press
[
/
]
to continue tuning.
6.
Press [
/
] to select
FINE
TUNING
. Press and hold
[
/
]
until
the sharpest colour picture is obtained.
8.
Press [
/
] to select
SKIP
.
The SKIP function determines whether the
channel can be selected when using the
CHANNEL
/
instead of the
NUMBER BUTTONS
.
9.
Press
[
/
]
to select ON or OFF for
this option.
10.
Press
SET
to confirm.
11.
Press
MENU
to leave this function.
IMPORTANT NOTE:
7.
If you connect an independent
decoder, you must press [
/
] to
select DECODER, then select
[
/
]
to
turn the decoder function ON.
C HANN E L
P R E S E T
C HANN E L S O R T
C L O C K
➔
P R E S E T
1
CHANN E L
CH 2 1
F I N E T UN I NG
▲
▲
D E COD E R
ON
O F F
S K I P
ON
O F F
MENU
SET
CLEAR
DISPLAY
PLUSCODE
MODE OSD
TIMER
ON/OFF
AUDIO
OUT
SKIP
SEARCH
ZERO
BACK
BACK
2
3
1
Remote Control
TINS-3809UMZZ ENGLISH.book Page 27 Monday, April 3, 2000 2:03 PM
Click on the first or last page to see other VC-M333 (serv.man5) service manuals if exist.