Sharp LC-60LE636E (serv.man12) User Manual / Operation Manual ▷ View online
67
Warning regarding basic use
Cautions regarding use in high and low temperature environments
• When the TV is used in a low temperature space (e.g., room, office), the picture
may leave trails or appear slightly delayed. This is not a malfunction, and the TV will
recover when the temperature returns to normal.
• Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the LCD panel to malfunction.
Storage temperature: e 5 °C to e 35 °C.
Devices connected to the protective earthing of the building installation through the
MAINS connection or through other devices with a connection to protective earthing
and to a television distribution system using coaxial cable, may in some circumstances
create a fire hazard. Connection to a television distribution system therefore has to be
provided through a device providing electrical isolation within a certain frequency range
(galvanic isolator, see EN 60728-11).
NOTE
• For requirements in Norway and Sweden, the requirements for isolation are also
relevant for devices that can be connected to television distribution systems.
Trade marks
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other
countries.”
• Manufactured under license from Dolby Laboratories.
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
• The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—
project.
• LC_ LCFONT+ and LC logo mark are registered trademarks of
SHARP Corporation. This product is embedded with LC Font technology, which was
developed by SHARP Corporation for clearly displaying easy-to-read characters on
an LCD screen. However, other non-LCD fonts are used for displaying some screen
pages.
• DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is
an official DivX Certified® device that plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX video.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
• “x.v.Colour” and
are trademarks of Sony Corporation.
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
• DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
• All other company or product names are trademarks or registered trademarks of their
respective companies.
Appendix
68
Appendix
Specifications
Item
LCD COLOUR TV (60
o/152 cm),
LC-60LE635E
LC-60LE635RU
LC-60LE636E
LC-60LE636S
LC-60LE635RU
LC-60LE636E
LC-60LE636S
LCD panel
152 cm (60o) X-Gen panel
Resolution
1,920 x 1,080 x 3 dots
Video colour system
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
function
TV-
standard
Analogue
CCIR (B/G, I, D/K, L/L’)
Digital
(635 series )
DVB-T (2K/8K OFDM), DVB-C, DVB-S/S2
Digital
(636 series )
DVB-T (2K/8K OFDM),
DVB-T2 (1K/2K/4K/8K/16K/32K OFDM), DVB-C
Receiving
channel
VHF/UHF
IR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch,
I21_I69 ch, IR A_IR J ch
CATV
Hyper-band, S1_S41 ch
Satellite
(635 series
only)
950_2150 MHz*
1
TV-tuning system
Auto Preset 999 ch (non-Nordic [DTV]),
Auto Preset 9999 ch (Nordic [DTV]),
Auto Preset 99 ch (ATV), Auto Label, Auto Sort,
Auto Preset 9999 ch (SAT [635 series only])
Stereo/Bilingual
A2/NICAM
Audio amplifier
10 W x 2
Speaker
(150 mm x 32 mm) x 2
Terminals Antenna
VHF/UHF
75 q Din type (analogue & digital)
Satellite
(635 series
only)
75 q F type (DVB-S/S2)
RS-232C
D-sub 9 pin male connector
EXT 1
SCART (AV input, Y/C input, RGB input, TV output)
EXT 2
RCA pin (AV input/AUDIO L/R)
EXT 3
Component (AV input/Audio L/R)
PC
mini D-sub 15 pin
HDMI 1 (EXT 4)
HDMI (ARC)
HDMI 2 (EXT 5)
HDMI
HDMI 3 (EXT 6)
HDMI
HDMI 4 (EXT 7)
HDMI
USB 1
USB
USB 2 (HDD)
USB
USB 3 (WIRELESS LAN) USB
ETHERNET (10/100)
ETHERNET (10/100)
Network connector
HDMI 2/PC AUDIO (L/R) Ø 3.5 mm jack*
2
DIGITAL AUDIO OUTPUT Optical S/PDIF digital audio output
C. I. (Common Interface) EN50221, R206001, CI Plus specification
OUTPUT/Headphones
C. I. (Common Interface) EN50221, R206001, CI Plus specification
OUTPUT/Headphones
RCA pin (AUDIO L/R)/Ø 3.5 mm jack (audio
output)
SD CARD (VIDEO
STORE)
SD card
OSD language
Czech, Danish, Dutch, English, Estonian,
Finnish, French, German, Greek, Hungarian,
Italian, Latvian, Lithuanian, Norwegian, Polish,
Portuguese, Russian, Slovak, Slovene, Spanish,
Swedish, Turkish, Ukrainian, Romanian
Power requirement
AC 220_240 V, 50 Hz
Power consumption
(method IEC62087)
168 W
(0.1 W standby*
3
)
Weight
30.0 kg (without stand)
33.0 kg (with stand)
Operating temperature
0 °C to e 40 °C
I
The satellite channel’s frequency may vary according to satellites and antennas.
J
The HDMI 2 and PC terminals can both use the same audio input terminal.
K
Standby power consumption applies when the TV is set to not receive EPG data.
• As a part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
69
Specifications (Wireless LAN USB adapter)
Product name
Dual Band 802.11n USB2.0 adapter
Standard
IEEE 802.11a/b/g/n
Host interface
USB2.0
Frequency band
2412_2484 MHz
5150_5850 MHz
Security
Static WEP (64/128 bit, key index 1 only)
WPA-PSK (TKIP)
WPA2-PSK (AES)
Modulation
DBPSK@1 Mbps
DQPSK@2 Mbps
CCK@5.5/11 Mbps
BPSK@6/9 Mbps
QPSK@12/18 Mbps
16-QAM@24 Mbps
64-QAM@48/54 Mbps and above, Rx up to 300
Mbps
Transmit
power and
sensitivity
Tx
output
power:
(Typical)
2.4 GHz
11b 17 e/_ 1.5 dBm
11g 14 e/_ 1.5 dBm
11n 13 e/_ 1.5 dBm
5 GHz
(5150_5250 MHz,
5250_5350 MHz)
11a 14 e/_ 1.5 dBm
11n 13 e/_ 1.5 dBm
5 GHz
(5470_5725 MHz,
5725_5850 MHz)
11a 13 e/_ 1.5 dBm
11n 13 e/_ 1.5 dBm
Rx sensitivity: (Typical)
_
84 dBm@11 Mbps
_
72 dBm@54 Mbps
_
64 dBm@64-QAM, 20 MHz channel spacing
_
61 dBm@64-QAM, 40 MHz channel spacing
Current Consumption (5V DC)
Tx: 2.2 W (Typical)
Rx: 1.4 W (Typical)
Weight
13 g
Dimensions
20.0 (W) g73.3 (D) g 8.0 (H) mm
Operating temperature
0 °C to e 40 °C
NOTE
• This TV has received the following certifications when connected in an environment
using the supplied SHARP wireless LAN adapter.
_
_
Wi-Fi CERTIFIED™ (certification program from the Wi-Fi Alliance®)
_
Wi-Fi Protected Setup™ (certification program from the Wi-Fi Alliance®)
• When there is significant interference in the 2.4_GHz frequency (such as from other
wireless LAN devices, Bluetooth® devices, 2.4_GHz cordless telephones, and
microwave ovens), it is recommended that you use a wireless LAN access point that
supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For
setup details, see the operation manual of your access point.
• Before transferring to a third party or disposal, be sure to initialize the wireless LAN
settings.
• Wireless LAN USB adapter (WN8522D 7-JU) is Peripheral Device for TV and supports
WEP64, WEP128, TKIP and AES encryptions.
• Using a wireless LAN adapter other than the supplied SHARP wireless LAN adapter
may result in radio communications that do not comply with regulations on radio
communications. Therefore, do not use a wireless LAN adapter other than the supplied
SHARP wireless LAN adapter.
Appendix
70
Environmental specifications
Item
I
On-Mode (W) (HOME MODE)
101 W
J
Energy-Save-Mode (W)
Advanced
75 W
K
Standby-Mode (W)
0.1 W
L
Annual Energy Consumption (kWh)
147 kWh
M
Annual Energy Consumptioning
Energy-Save-Mode (kWh)
Energy-Save-Mode (kWh)
Advanced
110 kWh
I
Measured according to IEC 62087 Ed. 2
J
For further information about the Energy Save function, please see related pages in
this operation manual
K
Measured according to IEC 62301 Ed. 1
L
Annual energy consumption is calculated on the basis of the On-Mode (HOME MODE)
power consumption, watching TV 4 hours a day, 365 days a year
M
Annual energy consumption is calculated on the basis of the Energy-Save-Mode
power consumption, watching TV 4 hours a day, 365 days a year
NOTE
• The power consumption of On-Mode varies depending on the images the TV displays.
Mounting the TV on a wall
• This TV should be mounted on a wall only with a SHARP wall mount bracket (Page
4). The use of other wall mount brackets may result in an unstable installation and
may cause serious injuries.
may cause serious injuries.
• Mounting the LCD colour TV requires special skills and should only be performed
by qualified service personnel. Customers should not attempt to do the work
themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the
TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
NOTE
• Detach the cable tie on the rear of the TV when using the optional mount bracket.
• Due to the terminal configuration on this TV, when you wall-mount this model, make
sure there is enough space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4
locations on the rear of the TV, and then use the screws supplied with the wall mount
bracket to secure the bracket to the rear of the TV.
E
Wall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable
one by setting this function to “Yes”.
Go to “Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
Appendix
Click on the first or last page to see other LC-60LE636E (serv.man12) service manuals if exist.