Sharp LC-60LE636E (serv.man12) User Manual / Operation Manual ▷ View online
43
Input source settings
Option
Input select
For setting the signal type of external equipment.
1
Press b to select the input source for setting
the input signal (“EXT1”) from the “INPUT”
menu, and then press ;.
2
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Input select”.
Item
EXT1
Y/C, CVBS, RGB
NOTE
• If no (colour) image displays, try changing to another
signal type.
• Check the operation manual of the external equipment
for the signal type.
Option
Input label
You can label each input source with a custom description.
1
Press b to select the desired input source
from the “INPUT” menu, and then press ;.
2
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Input label”.
3
Select each character of the new name for the
input source with using the software keyboard
(Page 13).
NOTE
• The label can be six characters or less.
• You cannot change labels if the input source is “TV”,
“USB media”, “Home network” or “NET”.
TV
INPUT
Switchable
CH list
Selecting the HDMI picture size
automatically
automatically
Option
HDMI auto view
This function allows you to automatically change to
the appropriate picture size when viewing an HDMI
signal using the HDMI 1, 2, 3 and 4 terminals.
1
Press b to select the input source (“HDMI 1”,
“HDMI 2”, “HDMI 3” or “HDMI 4”) connected to
your HDMI device, and then press ;.
2
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “HDMI auto view”.
Option
Headphone/Audio out select
You can select which device is used for outputting
audio.
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Headphone/Audio out select”.
Item
Headphone
Output audio through headphones.
Audio out
Output audio through an A/V receiver
or surround audio controller.
CAUTION
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound
may damage your hearing.
NOTE
• If you select “Audio out” when a cable is inserted in the
HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are
muted.
• When you select “Audio out”, you can adjust the TV
sound volume with the Yk/l buttons on the TV or
i+/-
i+/-
buttons on the remote control unit.
Option
Headphone out setting
You can select the headphone/speaker audio output
when using the headphones.
Go to “Menu” > “Setup” > “Option” > “Terminal
setting” > “Headphone out setting”.
Item
Headphone
Audio output from headphones only.
Dual
Audio output from headphones and
speakers.
NOTE
• This function does not work when “Change audio
output device” (Page 31) is set to “By AQUOS audio SP”
or “Headphone/Audio out select” is set to “Audio out”.
• Regarding the volume adjustment when “Dual” is set:
−
Adjust the speaker volume with the i+/- buttons
on the remote control unit.
−
Adjust the headphone volume with the Yk/l
buttons on the TV.
−
The headphone volume is not muted even by pressing
e
e
(Mute) button on the remote control unit.
• When not using the headphones:
−
Audio outputs from the speakers regardless of the
settings.
Option
Colour system
You can change the colour system to one that is
compatible with the image on the screen.
Go to “Menu” > “Setup” > “Option” > “Colour
system”.
NOTE
• The factory preset value is “Auto”.
• If “Auto” is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g., “PAL”, “SECAM”).
Useful viewing functions
44
Screen effect settings
Option
Channel selecting effect
This function shows a screen effect when choosing
or changing channels.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Channel selecting effect”.
Option
Programme title display
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Programme title display”.
NOTE
• This function is available only when the DTV/SAT mode
is selected.
Adjusting image position
Option
Position
For adjusting a picture’s horizontal and vertical
position.
Go to “Menu” > “Setup” > “Option” > “Screen
effect” > “Position”.
Item
H-Pos.
Centres the image by moving it to the
left or right.
V-Pos.
Centres the image by moving it up or
down.
NOTE
• Adjustments are stored separately for each input
source.
• Depending on the input signal type, “Wide mode”
setting or “Video mode” for the USB media mode, a
position setting may not be available.
• This function is not available for DTV broadcasts with
MHEG signals.
Useful viewing functions
45
Additional features
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to “Menu” > “Setup” > “Option” >
“Illumination”.
Item
Off
The LED is not illuminated.
Standby
The LED is illuminated while the TV is
in standby mode.
Watch
The LED is illuminated while you watch
TV.
Always
The LED is illuminated all the time.
NOTE
• The factory default for this item is “Watch”. Set to “Off”
if you do not want the LED to illuminate.
Option
Game play time
This function allows you to display the elapsed time
on the screen when “AV mode” is set to “GAME”.
Go to “Menu” > “Setup” > “Option” > “Game
play time”.
Item
On
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off
Hides the time.
NOTE
• This menu is not selectable if the input source is “TV” or
“USB media”.
Option
Key lock
This function allows you to lock the buttons on the
TV or remote control unit in order to prohibit children
from changing the channel or volume.
Go to “Menu” > “Setup” > “Option” > “Key
lock”.
Item
Off
Unlocks the buttons.
RC control lock
Locks all buttons on the remote
control unit.
Button control
lock
lock
Locks the buttons on the TV except
the power switch.
NOTE
• You cannot set both “RC control lock” and “Button
control lock” at the same time.
E
Cancelling the lock
Press @ on the TV and set to “Off” to cancel
the “RC control lock”. Press @ on the remote
control unit and set to “Off” to cancel the “Button
control lock”.
• Refer to page 20 for menu operation using @ on the
TV.
Useful viewing functions
46
Using a USB device
The TV provides you some functions using a USB
device. You can select which function to use after
inserting a USB device in the USB port, and the TV
starts the settings for each function.
USB usage
• Storage device for time shift
• USB media to enjoy photos, music and videos
Connecting a USB device
Connect a USB device to the TV as shown below.
NOTE
• Some USB devices may not work properly for this
function.
• Directly connect the USB storage device for time shift to
the USB port.
• Do not connect and disconnect a USB device from the
TV repeatedly.
Selecting USB usage
You need to select which function a USB device is
used for when the USB device is inserted in the USB
port.
1
Connect a USB device to one of the USB ports.
• The screen prompt pops up.
NOTE
• If a USB storage device is inserted during time shift
operation, a screen prompt will not pop up.
2
Select the function you want to use.
Press c/d, and then press ;.
USB media
Time shift
NOTE
• When you want to configure a software update, you
need to press > to close the window.
For time shift
You need to complete the following procedure to
use the USB storage device for time shift. After
selecting “Time shift”, the TV starts initializing the
USB storage device. Follow the screen prompt to
complete the setting.
complete the setting.
1
Press c/d to select “ Yes”, and then press ;.
• Reconfirm use of the USB storage device for time
shift.
NOTE
• When you have inserted two or more USB storage
devices in the ports, an error message appears. Insert
only one USB storage device for time shift.
• You can also set the USB storage device to be used for
time shift in the “Device registration” menu (Page 49).
• At least 1 GB is required for a USB storage device for
time shift.
• A USB HDD cannot be used as a USB storage device
for time shift.
2
Press c/d to select “ Yes”, and then press ;.
• The TV starts initializing the USB storage device.
• Delete the data in the USB storage device.
NOTE
• Do not disconnect the USB storage device when the TV
is recognizing the memory for time shift.
3
Select “OK”.
Press ;.
NOTE
• If an error message is displayed on the screen, follow
the screen prompts and remove the USB storage
device.
Go to Time shift on page 47.
For USB media
After selecting “USB media”, the TV switches to the
USB media.
Go to USB media/Home network on page 50.
NOTE
• Depending on the USB device, the TV may not be able
to recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending on
the character set) may not be displayed.
• Do not disconnect a USB device or memory card from
the TV while transferring files, using the slide show
function, when a screen is switching to another or
before you exit “USB media” from the “INPUT” menu.
Disconnecting the USB device
When you disconnect the USB device, be sure to
the following steps.
For time shift
Go to “Menu” > “Setup” > “Option” > “Time shift
setting” > “Device removal”.
NOTE
• This menu item cannot be selected when a USB storage
device for time shift is not registered.
• The USB storage device registration for time shift is
cancelled in the following cases:
−
When the USB storage device is removed.
−
When another USB storage device is registered for
time shift; only one USB device can be registered for
time shift.
For USB media
1
Press B on the remote control unit.
• Display “USB media menu”.
2
Press a/b to select “USB device removal”, and
then press ;.
3
Press c/d to select “Yes”, and then press ;.
Other useful features
Click on the first or last page to see other LC-60LE636E (serv.man12) service manuals if exist.