DOWNLOAD Sharp XV-Z100 (serv.man3) Service Manual ↓ Size: 5.09 MB | Pages: 65 in PDF or view online for FREE

■ When turning off the projector, the cooling fan

runs to decrease the internal temperature for
a while. Unplug the power cord after the cool-
ing fan stops. The period the cooling fan runs
will vary, depending on the circumstances and
the internal temperature.

■ When using the projector, be sure not to sub-

ject it to hard impact and/or vibration, as this
can result in damage. Take extra care with
the lens. Before moving the projector, be sure
to unplug the power cord from the wall outlet,
and disconnect any other cables connected
to it.

■ Do not carry the projector by holding the lens.

■ When storing the projector, re-attach the lens

cap. (See page 11).

■ Do not expose the projector to direct sunlight

or place next to heat sources. Doing so may
affect the cabinet color or cause deformation
of the plastic cover.

■ When connecting a computer or other audio-

visual equipment to the projector, make the
connections AFTER unplugging the power
cord of the projector from the AC outlet and
turning off the equipment to be connected.

■ Please read the operation manuals of the pro-

jector and the equipment to be connected for
instructions on how to make the connections.

• The cooling fan regulates the internal tem-

perature, and its performance is automatically
controlled. The sound of the fan may change
during projector operation due to changes in
the fan speed. This does not indicate malfunc-
tion.

• Do not unplug the power cord during projec-

tion or cooling fan operation. This can cause
damage due to rise in internal temperature,
as the cooling fan also stops.

■ The power supply voltage and the shape of

the plug may vary depending on the region
or country you are using the projector in.
When using the projector overseas, be sure
to use an appropriate power cord for the coun-
try you are in.

■ If the projector starts to overheat due to setup

problems or blockage of the air vents, “

” and

“

” will illuminate in the lower left corner

of the picture. If the temperature continues to
rise, the lamp will turn off, the temperature warn-
ing indicator on the projector will blink, and after
a 90-second cooling-off period the projector will
enter standby mode. Refer to “Maintenance In-
dicators” on page 48 for details.

XV-Z100_EN_b

05.8.25, 5:50 AM

9

Remote control

RRMCGA430WJSA

Two R-6 batteries

 (“AA” size, UM/SUM-3,

HP-7 or similar)

3 RCA to 15-pin

D-sub adaptor

(11.8" (30 cm))

QCNWGA075WJPZ

• Operation manual

■ Lamp unit

■ DIN-D-sub RS-232C adaptor (5 

57

/

64

o (15 cm))

AN-100LP

AN-A1RS

21 pin RCA

conversion adaptor

QSOCZ0361CEZZ

• Some of the optional accessories may not be available depending on the region. Please check with

your nearest Sharp Authorized Projector Dealer or Service Center.

Lens cap (attached)

CCAPHA024WJSA

Video cable

QCNWGA001WJZZ

Power cord*

For Europe,

except U.K.

(6' (1.8 m))

QACCVA011WJPZ

For U.K. and

Singapore

(6' (1.8 m))

QACCBA036WJPZ

For Australia, New

Zealand and Oceania

(6' (1.8 m))

QACCLA018WJPZ

(1)

(2)

(3)

* Use the power cord that corresponds to the wall outlet in your country.

XV-Z100_EN_c

05.8.29, 7:07 AM

10

STANDBY/ON
button
For turning the
power on and
putting the
projector into
standby mode.

Lamp indicator

Temperature warning
indicator

Adjustment buttons
(P/R/O/Q)
For selecting menu items.

Volume buttons
(–O/Q+)
For adjusting the speaker
sound level.

ENTER button
For setting
items selected
or adjusted on
the menu.

MENU/HELP button
For displaying
adjustment and
setting screens, and
help screen.

Focus ring
For adjusting
the focus.

INPUT buttons (P/R)
For switching input mode
1, 2, 3 or 4.

Remote control
sensor

HEIGHT
ADJUST
lever

Numbers in Z refer to the main pages in this operation manual where the topic
is explained.

KEYSTONE
button
For entering
the Keystone
Correction
mode.

Intake vent

Power
indicator

Zoom ring
For enlarging/
reducing the picture.

Push both sides of the lens cap
to attach or remove.

XV-Z100_EN_c

05.8.25, 5:51 AM

11

Numbers in Z refer to the main pages in this operation manual where the topic
is explained.

Speaker

Rear adjustment
foot

Kensington Security
Standard connector

AC socket
Connect the
supplied Power cord.

Intake vent

Exhaust vent

1

2

6

7

8

3

4

5

Using the Kensington Lock
• This projector has a

Kensington Security Standard
connector for use with a
Kensington MicroSaver
Security System. Refer to the
information that came with the
system for instructions on how
to use it to secure the
projector.

Terminal

Description

Page

INPUT 1, 2 terminal

■ Connecting video equipment with component output terminal

(DVD player, DTV decoder, DVD recorder with hard disc, etc.).

1

■ Connecting the computer.

2

AUDIO (INPUT 1, 2) terminal
Connecting an audio cable (Shared audio input terminal for INPUT 1 and 2).

OUTPUT (INPUT 1, 2) terminal
Connecting the monitor when you want to simultaneously watch the
projection image on the monitor. (Shared computer RGB and
component signals output terminal for INPUT 1 and 2).

3

INPUT 3 terminal
Connecting video equipment with S-video output terminal (VCR, DVD
player, etc.).

4

RS-232C terminal
Connecting the computer to control the projector.

5

AUDIO OUTPUT terminal
Connecting to an amplifier or other audio equipment with an audio cable
(commercially available) (Shared audio output terminal for INPUT 1, 2, 3 and 4).

6

INPUT 4 terminal
Connecting video equipment without S-video output terminal.

AUDIO (INPUT 3, 4) terminal
Connecting an audio cable (Shared audio input terminal for INPUT 3 and 4).

7

8

XV-Z100_EN_c

05.8.25, 5:51 AM

12