PG-A10X (serv.man4). Specifications — Sharp Projector Service Manual (repair manual)

Model
PG-A10X (serv.man4)
Pages
1 Few pages! See other manuals at the bottom of the first or last page.
Size
9.25 KB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Specifications
File
pg-a10x-sm4.pdf
Date

View Sharp PG-A10X (serv.man4) Service Manual online

3
PG-A10X
PG-A10X-SL
AN-A10T
Specifications
Product type
LCD Projector
Model
PG-A10X/PG-A10X-SL
Video system
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480I/DTV480P/DTV540P/DTV580I/DTV580P/DTV720P/DTV1035I/DTV1080I
Display method
LCD panel 
  3, RGB optical shutter method
LCD panel
Panel size: 0.79" (20.0 mm) (12 [H] 
  16 [W] mm)
No. of dots: 786,432 dots (1,024 [H] 
  768 [V])
Standard lens
1 – 1.2
  zoom lens, F1.9 – 2.2, f = 26 – 31 mm
Projection lamp
SHP 165 W lamp
Component input signal
15-pin mini D-sub connector
(INPUT1)
Y: 1.0 Vp-p, sync negative, 75 
 terminated
P
B
: 0.7 Vp-p, 75 
 terminated
P
R
: 0.7 Vp-p, 75 
 terminated
Horizontal resolution
700 TV lines (DTV720P)
Computer RGB input signal
15-pin mini D-sub connector
(INPUT 1)
RGB separate/sync on green type analog input: 0 – 0.7 Vp-p, positive, 75 
 terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
S-video input signal
4-pin mini DIN connector
(INPUT 2)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 
 terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 
 terminated
Video input signal
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 
(INPUT 3)
terminated
Computer control signal (RS-232C)
9-pin mini DIN connector
Pixel clock
12 – 108 MHz
Vertical frequency
43 – 85 Hz
Horizontal frequency
15 – 70 kHz
Audio input signal
ø 3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 k
 (stereo)
Audio output
1.0 W (monaural)
Speaker system
2.8 cm round 
  1
Rated voltage
AC 100 – 240 V
Input current
2.4 A
Rated frequency
50/60 Hz
Power consumption
240 W (Standard mode)/190 W (Eco mode) with AC 100 V
226 W (Standard mode)/182 W (Eco mode) with AC 240 V
Power consumption
5 W (AC 100 V) — 8 W (AC 240 V)
(standby)
900 BTU/hour (Standard mode)/710 BTU/hour (Eco mode) with AC 100 V
Heat dissipation
850 BTU/hour (Standard mode)/680 BTU/hour (Eco mode) with AC 240 V
Operating temperature
41
°
F to 95
°
F (+5
°
C to +35
°
C)
Storage temperature
– 4
°
F to 140
°
F ( – 20
°
C to +60
°
C)
Cabinet
Plastic
I/R carrier frequency
38 kHz
Dimensions (approx.)
11 45/64" 
  3 13/64" 
  9 1/32" (297 (W) 
  81 (H) 
  229 (D) mm) (main body only)
11 45/64"  
  3 33/64" 
  9 1/32" (297 (W) 
  89 (H) 
  229 (D) mm) (including adjustment foot and
projecting parts)
Weight (approx.)
6.4 lbs. (2.9 kg)
Supplied accessories
Remote control, Two R-6 batteries, Power cord for U.S., Canada etc. (6', 1.8 m), Power cord for Europe,
except U.K. (6', 1.8 m), Power cord for U.K., Hong Kong and Singapore (6', 1.8 m), Power cord for
Australia, New Zealand and Oceania (6', 1.8 m), RGB cable (9'10", 3.0 m), DIN-D-sub RS-232C adaptor
(5 57/64", 15 cm), Carrying case, Lens cap (attached), Extra air filter, Projector manual and technical
reference CD-ROM, “QUICK GUIDE” label, Operation manual
Replacement parts
Lamp unit (Lamp/cage module) (BQC-PGA10X//1), Remote control (RRMCGA138WJSA), Two R-6 bat-
teries ("AA" size, UM/SUM-3, HP-7, or similar), Power cord for U.S., Canada etc. (QACCDA016WJPZ),
Power cord for Europe, except U.K. (QACCVA006WJPZ), Power cord for U.K., Hong Kong and Singapore
(QACCBA015WJPZ), Power cord for Australia, New Zealand and Oceania (QACCLA005WJPZ), RGB
cable (QCNWGA012WJPZ), DIN-D-sub RS-232C adaptor (QCNWGA015WJPZ), Carrying case
(GCASNA006WJSA), Lens cap (CCAPHA007WJ01), Air filter (PFILDA008WJZZ), Projector manual
and technical reference CD-ROM (UDSKAA022WJN1), “QUICK GUIDE” label (TLABZA191WJZZ), Op-
eration manual (TINS-A505WJN1)
This SHARP projector uses an LCD (Liquid Crystal Display) panel.
This very sophisticated panel contains 786,432 pixels ( 
 RGB)
TFTs (Thin Film Transistors). As with any high technology electronic
equipment such as large screen TVs, video systems and video cam-
eras, there are certain acceptable tolerances that the equipment
must conform to.
Specifications are subject to change without notice.
This unit has some inactive pixels within acceptable tolerances which
may result in inactive dots on the picture screen. This will not affect
the picture quality or the life expectancy of the unit.

Download Sharp PG-A10X (serv.man4) Service Manual (Repair Manual)

Here you can view online or download Sharp PG-A10X (serv.man4) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Sharp PG-A10X (serv.man4) Projector. Information contained in Sharp PG-A10X (serv.man4) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).