DOWNLOAD Sharp PG-A10X (serv.man33) Service Manual ↓ Size: 1.05 MB | Pages: 20 in PDF or view online for FREE

Model
PG-A10X (serv.man33)
Pages
20
Size
1.05 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Appendix
File
pg-a10x-sm33.pdf
Date

Sharp PG-A10X (serv.man33) User Manual / Operation Manual ▷ View online

Appendix
-51
Carrying the Projector
How to Use the
Carrying Case
When carrying the projector, attach the lens cap
to the lens, and place it in the supplied carrying
case.
1
Open the cover of the carrying
case.
2
Remove the inner padding from
the carrying case, and fold it in
the direction of the arrows.
3
Reinsert the inner padding into
the carrying case.
Info
• Be sure to insert the inner padding to
protect the lens and the projector.
4
Place the projector and the ac-
cessories in the carrying case.
Info
• Be sure to attach the lens cap to pro-
tect the lens.
• Be sure the projector has cooled
down sufficiently before placing it in
the case.
Info
• This carrying case is only for storing and
carrying the projector.
• Sending the projector in the carrying case
as a parcel may cause damage to the pro-
jector. If you send the projector in the car-
rying case as a parcel, be sure to place it
in a sturdy case and with enough shock
absorbing material to avoid any damage.
• Do not expose the carrying case or projec-
tor to direct sunlight, near heat sources, or
leave them in a car. The carrying case or
projector may change color or become de-
formed.
Adjust the
shoulder
strap.
Lens cap
-52
Cleaning
Paper
Wax
Thinner
Cleaning the lens
■ Use a commercially available blower or lens
cleaning paper (for glasses and camera lenses)
for cleaning the lens. Do not use any liquid type
cleaning agents, as they may wear off the coat-
ing film on the surface of the lens.
■ As the surface of the lens can easily get dam-
aged, be sure not to scrape or hit the lens.
Cleaning the exhaust and intake vents
■ Use a vacuum cleaner to clean dust from the
exhaust vent and the intake vent.
Maintenance
Cleaning the projector
■ Be sure to unplug the power cord before clean-
ing the projector.
■ The cabinet as well as the operation panel is
made of plastic. Avoid using benzene or thinner,
as these can damage the finish on the cabinet.
■ Do not use volatile agents such as insecticides
on the projector.
Do not attach rubber or plastic items to the pro-
jector for a long time.
    The effects of some of the agents in the plastic
may cause damage to the quality or finish of the
projector.
■ Wipe off dirt gently with a soft flannel cloth.
■ When the dirt is hard to remove, soak a cloth in a
mild detergent diluted with water, wring the cloth
well and then wipe the projector.
Strong cleaning detergents may discolor, warp
or damage the coating on the projector.
Make sure to test on a small, inconspicuous area
on the projector before use.
Mild detergent
diluted with water
Mild detergent
Appendix
-53
1
2
3
Replacing the Air Filter
Tab
• This projector is equipped with air fil-
ters to ensure the optimal operating
condition of the projector.
• The air filters should be cleaned every
100 hours of use. Clean the filters more
often when the projector is used in a
dusty or smoky location.
• Ask your nearest Sharp Authorized Pro-
jector Dealer or Service Center to ex-
change the filter (PFILDA008WJZZ)
when it is no longer possible to clean.
Cleaning and Replacing
the Air Filter
1
Turn off the power and discon-
nect the power cord.
• Press 
 on the projector or 
on the remote control. Wait until the cool-
ing fan stops.
2
Remove the filter/lamp unit
cover.
• Turn the projector over. Loosen the user
service screw (1) that secures the fil-
ter/lamp unit cover. Pressing the tab
(2), remove the filter/lamp unit cover
(3).
3
Remove the air filter.
• Pick the air filter up with your fingers and
lift it out of the filter/lamp unit cover.
Power OFF button
Air filter
(not removable)
Power
OFF
button
User service screw
Air filter
Air filter
(not removable)
"
"
"
"
"
 Bottom view
"
"
"
"
"
 Rear view
-54
4
Clean the air filter.
• Clean the dust off the air filter and cover
with a vacuum cleaner extension hose.
5
Replace the air filter.
• Place the air filter underneath the tabs
on the filter/lamp unit cover.
6
Replace the filter/lamp unit
cover.
• Align the tab on the filter/lamp unit  cover
(1) and place it while pressing the tab
(2) to close it. Then tighten the user
service screw (3) to secure the filter/
lamp unit cover.
Note
• Be sure the filter/lamp unit  cover is securely
installed. The power will not turn on unless
it is correctly installed.
• If dust or dirt has collected inside the rear
and bottom air filters (not removable), clean
the filter with a vacuum cleaner extension
hose.
1
2
Tab
3
User service screw
Replacing the Air Filter
Page of 20
Display

Sharp PG-A10X (serv.man33) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp PG-A10X (serv.man33) Service Manual ↓ Size: 1.05 MB | Pages: 20 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp PG-A10X (serv.man33) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp PG-A10X (serv.man33) Projector. Information contained in Sharp PG-A10X (serv.man33) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.