View Sharp PG-A10X (serv.man30) User Guide / Operation Manual online
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
the AC socket on the rear of the pro-
the connectors by tightening the screws on both
sides of the plug.
Using the RGB Cable
computer using the supplied
the projector to the computer using
a ø3.5 mm audio cable (commer-
cially available or available as Sharp
service part QCNWGA013WJPZ).
Type” in the “Picture” menu. See page
patible with the projector. Use with computer
signals other than those listed may cause
some of the functions to not work.
tact your nearest Sharp Authorized Projec-
tor Dealer or Service Center.
signal output setting of the computer is
switched to the external output. Refer to the
computer operation manual for switching the
computer signal output settings.
(commercially available or
available as Sharp service part
Equipment Using an
S-video, a Composite
Video or an Audio Cable
laser disc player or other audio-visual equipment
can be connected to INPUT 2, INPUT 3 and AU-
DIO input terminals.
video equipment using an S-
video cable or a composite video
cable (both commercially avail-
video equipment using a ø3.5
mm minijack to RCA audio cable
separated into color and luminance signals
to realize a higher-quality image. To view a
higher-quality image, use a commercially
available S-video cable to connect the IN-
PUT 2 terminal on the projector and the S-
video output terminal on the video equip-