Sharp MX-RB15 (serv.man11) Service Manual ▷ View online
CHAPTER 1 GENERAL DESCRIPTION
1-34
8)
Return the buffer roller and the buffer roller cover to their original position, and close the upper cover.
Figure 1-353
9)
Connect the finisher to the host machine.
Figure 1-354
10) Operate as instructed on the display.
CHAPTER 1 GENERAL DESCRIPTION
1-35
H.
Removing Punched Scrap from the Puncher Unit (option)
If the display indicates a punched scrap full state on the puncher unit, perform the following to remove
the punched scrap:
1) Open the front cover.
Figure 1-355
2) Slide out the punched scrap container.
Figure 1-356
3) Discard the punched scrap.
Figure 1-357
CHAPTER 1 GENERAL DESCRIPTION
1-36
4) Return the punched scrap container to its original position.
Figure 1-358
CHAPTER 1 GENERAL DESCRIPTION
1-37
IV. MAINTENANCE BY THE USER
A.
Maintenance by the User
Table 1-401
No.
Item
Timing
1
Replacing the staple cartridge (finisher unit)
When the appropriate indication is made on
the host machine’s display.
the host machine’s display.
2
Replacing the staple cartridge (saddle stitch
unit)
unit)
Caution:
The finisher unit and the saddle stitch unit use different cartridge types. Be sure that the appropriate
type is used for each.
type is used for each.
Click on the first or last page to see other MX-RB15 (serv.man11) service manuals if exist.