Sharp MX-RB15 (serv.man11) Service Manual ▷ View online
CHAPTER 1 GENERAL DESCRIPTION
1-22
7)
Return the tab on the staple cartridge to its original position.
8)
Return the staple cartridge to its original position, and close the front cover.
Figure 1-322
Reference
When the cover has been closed, the stapler unit
will automatically execute idle punching several
times to advance the staples.
will automatically execute idle punching several
times to advance the staples.
CHAPTER 1 GENERAL DESCRIPTION
1-23
D.
Removing Paper Jams from the Saddle Stitch Unit (Saddle
Finisher)
Finisher)
If the host machine indicates the saddle stitch unit paper jam message, perform the following to
remove the jam.
1)
Holding the saddle stitch unit as shown, move it to detach it from the host machine.
Figure 1-323
2)
Open the front cover and the front lower cover.
Figure 1-324
CHAPTER 1 GENERAL DESCRIPTION
1-24
3)
Turn the knob on the left side.
Figure 1-325
4)
Turn the knob on the right side while pushing it in.
Figure 1-326
5)
Remove the jam.
Figure 1-327
CHAPTER 1 GENERAL DESCRIPTION
1-25
6)
Open the inlet cover, and remove the jam.
Figure 1-328
7)
Close the front lower cover and the front cover.
Figure 1-329
8)
Connect the finisher unit.
9)
Operate as instructed on the display.
Click on the first or last page to see other MX-RB15 (serv.man11) service manuals if exist.