Sharp MX-RB15 (serv.man11) Service Manual ▷ View online
CHAPTER 1 GENERAL DESCRIPTION
1-14
III. Using the Machine
A.
Removing Paper Jams from the Finisher Unit
If the host machine indicates the finisher paper jam message, perform the following to remove the jam.
1)
Holding the finisher unit as shown, move it to detach it from the host machine.
Figure 1-301
2)
Remove any jam visible from the outside.
Figure 1-302
CHAPTER 1 GENERAL DESCRIPTION
1-15
3)
Open the upper cover, and check the inside of the finisher.
Figure 1-303
4)
Lift the buffer roller cover, and remove the jam.
Figure 1-304
5)
Lift the buffer roller, and remove the jam.
Figure 1-305
CHAPTER 1 GENERAL DESCRIPTION
1-16
6)
Return the buffer roller and the buffer roller cover to their original positions, and close the upper cover.
Figure 1-306
7)
Connect the finisher to the host machine.
Figure 1-307
8)
Operate as instructed on the display.
CHAPTER 1 GENERAL DESCRIPTION
1-17
B.
Supplying the Finisher Unit with Staples
If the host machine indicates the finisher unit staple supply message, perform the following to supply
it with staples.
1) Open the front cover.
1) Open the front cover.
Figure 1-308
Figure 1-309
3)
When the staple cartridge has slightly slid out, hold and pull it out.
Figure 1-310
2)
Shift down the green lever.
Click on the first or last page to see other MX-RB15 (serv.man11) service manuals if exist.