Sharp MX-RB15 (serv.man11) Service Manual ▷ View online
CHAPTER 1 GENERAL DESCRIPTION
1-30
4)
Hold the cartridge on its sides, and remove it.
Figure 1-340
5)
Push down on the area identified as A, and pull up the tab identified as B.
Figure 1-341
6)
Remove the staple jam, and return the tab B to its original position.
Figure 1-342
CHAPTER 1 GENERAL DESCRIPTION
1-31
7)
Return the cartridge to its original position.
Figure 1-343
8)
Pull the stitch of the stitch unit to the front once, and then return it to its original position.
Figure 1-344
9)
Push the stitch unit back to its original position, and close the front lower cover.
Figure 1-345
Reference
Whenever you have removed a staple jam, be sure
to execute staple edging.
to execute staple edging.
CHAPTER 1 GENERAL DESCRIPTION
1-32
G.
Removing Paper Jams from the Puncher Unit (option)
If the display indicates a paper jam on the puncher unit, perform the following to remove the jam:
1)
Open the front cover.
Figure 1-346
2)
Align the triangle mark on the knob within the range marked by .
Figure 1-347
3)
Close the front cover.
Figure 1-348
CHAPTER 1 GENERAL DESCRIPTION
1-33
4) Holding the finisher unit as shown, move it to detach it from the host machine.
Figure 1-349
5) Remove any jam visible from the outside.
Figure 1-350
6) Open the upper cover, and check the inside of the finisher.
Figure 1-351
7) Lift the buffer roller cover, and remove the jam.
Figure 1-352
Click on the first or last page to see other MX-RB15 (serv.man11) service manuals if exist.