Sharp MX-RB15 (serv.man11) Service Manual ▷ View online
CHAPTER 1 GENERAL DESCRIPTION
1-26
E.
Supplying the Saddle Stitch Unit with Staples (Saddle
Finisher)
Finisher)
If the host machine indicates the saddle stitch unit staple supply message, perform the following to
supply it with staples.
1)
Open the front cover and the front lower cover.
Figure 1-330
2)
Slide out the stitch unit.
Figure 1-331
CHAPTER 1 GENERAL DESCRIPTION
1-27
3)
Pull the stitch unit to the front once, and then shift it up.
Figure 1-332
4)
Hold the empty cartridge on its sides, and remove it.
Figure 1-333
5)
Set a new cartridge.
Figure 1-334
Reference
You must always replace both cartridges at the
same time.
same time.
CHAPTER 1 GENERAL DESCRIPTION
1-28
6)
Pull the stitch to the front once, and then return it to its original position.
Figure 1-335
7)
Push in the stitch unit, and close the front cover.
Figure 1-336
CHAPTER 1 GENERAL DESCRIPTION
1-29
F.
Removing Staple Jams from the Saddle Stitch Unit (Saddle
Finisher)
Finisher)
If the host machine indicates the saddle stitch unit staple jam message, perform the following to
remove the jam.
1)
Open the front cover and the front lower cover.
Figure 1-337
2)
Slide out the stitch unit.
Figure 1-338
3)
Pull the stapler of the stitch unit to the front once, and then shift it up.
Figure 1-339
Click on the first or last page to see other MX-RB15 (serv.man11) service manuals if exist.