Sharp MX-M654N / MX-M754N (serv.man4) Service Manual ▷ View online
MX-M754N MX-M654N/M754N (MAIN UNIT) 1 – 1
MX-M754N
Service Manual
[1] MX-M654N/M754N (MAIN UNIT)
1. Unpacking
A. Pulling out the main unit
1) Remove the top case, the top cushion, the packing case.
B. Fixing tape and protection material removal
1) Remove the fixing tape and the protection material.
C. Included parts check
1) Check to confirm that all the parts are provided.
2. Installation
A. Machine height and tilt adjustments
1)
Put the height adjuster plate (Packed items No.1 x4) under the
adjuster bolt at the bottom of the machine. Turn the adjuster
bolt to adjust the height and the tilt of the machine.
adjuster bolt at the bottom of the machine. Turn the adjuster
bolt to adjust the height and the tilt of the machine.
MEMO: When the adjuster bolt is turned counterclockwise, the
height is decreased. When turned clockwise, the height is
increased. (Common to the options the height of which is
adjusted by the adjuster bolt.)
height is decreased. When turned clockwise, the height is
increased. (Common to the options the height of which is
adjusted by the adjuster bolt.)
NOTE: Lower the height of the MX-CF11 to the lowest position
before adjusts the level between the MX-CF11 and the
main body.Adjust the height of the top surface of main
body reference to the top surface of the MX-CF11.
main body.Adjust the height of the top surface of main
body reference to the top surface of the MX-CF11.
B. Label attachment (*Only for Europe)
1)
Attach the Power supply careful label to the back of cabinet
NOTE: choose a linguistic label according to the area.
No.
Name
Quantity
1
Height adjuster plate
4
1
Low
High
5
: ‘16/Apr
5
MX-M754N MX-M654N/M754N (MAIN UNIT) 1 – 2
C. Lock release
(1) Scanner (2/3 mirror unit) lock release
1)
Remove the scanner lock screw (a) and the caution label (b).
Type
Name
Language
A
Power supply careful label EU-A
Portuguese/Italian
B
Power supply careful label EU-B
Dutch/Swedish
C
Power supply careful label EU-C
Norwegian/Finnish
D
Power supply careful label EU-D
Danish/Icelandic
E
Power supply careful label EU-E
Czech/Polish
F
Power supply careful label EU-F
Hungarian/Greek
G
Power supply careful label EU-G
Turkish/Slovak
H
Power supply careful label EU-H
Latvian/Romanian
I
Power supply careful label EU-I
Slovene/Croatian
J
Power supply careful label EU-J
Estonian/Lithuanian
K
Power supply careful label EU-K
Bulgarian
5
5
: ‘16/Apr
MX-M754N MX-M654N/M754N (MAIN UNIT) 1 – 3
(2) Tray rotation plate lock release
1) Pull out trays 1 and 2, and remove the rotating plate lock screw
and the tray caution label.
2) Pull out trays 3 and 4, and remove the rotating plate fixing
material and the tray caution label Remove the blue screw
from the tray 3 only.
from the tray 3 only.
D. Fusing heat roller pressure
1) Pull the knob on the right door to pull out the right door.
2)
Turn the screw in the fusing section as shown in the figure
below to press the heat rollers together.
below to press the heat rollers together.
NOTE: If the machine is left unused for one month or more, the
heat roller rubber may be deformed. avoid such a case,
release the pressure before the machine is left unused.
release the pressure before the machine is left unused.
E. Developer supply
1)
Open the right door unit.
2)
Open the front cover and remove the cover.
3)
Loosen the screw and remove the cover.
4)
Loosen the screw and pull out the developing unit.
Ĭ
ĭ
Ĭ
ĭ
Ĭ
ĭ
Ĭ
Ĭ
Ĭ
Į
ĭį
MX-M754N MX-M654N/M754N (MAIN UNIT) 1 – 4
5) Remove the screws and the cover.
6) While supplying to the developer supply port of the developing
unit, turn the MG gear clockwise with a plus screw driver to
supply all developer to the developing unit.
supply all developer to the developing unit.
NOTE: When supplying developer, do not touch the MG roller
with bare hands.
7) Install the cover and fix it with screws.
8) Insert developing unit to the main unit and fix it with screw.
9)
Install the cover and fix it with screws.
10) Install the cover and close the front cover.
F. Toner collection container check
1)
Open the right cover.
2)
Check to confirm that toner collection container is securely
installed.
installed.
Į
ĭ
Ĭ
ĭ
Ĭ
Ĭ
Į
ĭ
Į
Ĭ
ĭ
ĭ
Ĭ
Ĭ
ĭ
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man4) service manuals if exist.