Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man18) Service Manual ▷ View online
MX-M503N MX-PNX6A/B/C/D 10 – 6
[For DSPF/RSPF] (Package part No. 12 of the MX-FN11)
I. Turn ON the main power switch of the main
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
1mm
1mm
1mm
1mm
DSPF
RSPF
ON
MX-M503N MX-TRX2 11 – 1
MX-M503N
Service Manual
[11] MX-TRX2
1. Unpacking
A. Removal of the exit tray unit
B. Check the packed items
1)
Check that all the items are included in the package.
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1)
Turn OFF the power switch on the operation panel.
2)
Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
Turn OFF the power switch in the front cabinet of the main unit.
3)
Remove the power plug of the main unit from the outlet.
B. Installation of the exit roller unit
1)
Open the right door.
2)
Remove the screw, and remove the connector cover.
3)
Remove the screw. Disengage the engagement in the front
side then in the rear side, and remove the paper exit cover.
side then in the rear side, and remove the paper exit cover.
No.
Packed part names
Quantity
1
Exit roller unit
1
2
Full detection actuator
1
1
2
OFF
1
2
1
2
3
4
MX-M503N MX-TRX2 11 – 2
4)
Connect the connector, and install the exit roller unit (package
part No. 1). Use the screw which was removed in step 3) and
fix the unit.
part No. 1). Use the screw which was removed in step 3) and
fix the unit.
5)
Install the connector cover, and fix it with the screw.
6)
Install the exit tray unit (A) and the full detection actuator (B)
(package part No. 2).
* Be careful of the installing direction of the full detection actu-
(package part No. 2).
* Be careful of the installing direction of the full detection actu-
ator.
C. Turn on the power of the main unit.
1)
Insert the power plug of the main unit into the power outlet.
2)
Open the front cabinet.
Turn ON the power switch in the front cabinet of the main unit.
Turn ON the power switch in the front cabinet of the main unit.
3)
Turn ON the power switch on the operation panel.
D. Tray setting
Use SIM26-1 to set the tray YES/NO.
A
B
B
ON
MX-M503N MX-FXX2 12 – 1
MX-M503N
Service Manual
[12] MX-FXX2
1. Unpacking
A. Parts included
2. Installation
<Note before installation>
• Start installation after checking that the LINE indicator and the
• Start installation after checking that the LINE indicator and the
DATA indicator below it on the operation panel are neither lit nor
blinking.
blinking.
A. Turn off the power switches of the main unit.
1)
Turn the power switch located on the operation panel to the
“OFF” position.
“OFF” position.
2)
After checking that the operation panel has gone out, open the
front cabinet and turn the main power switch to the “OFF” opsi-
tion.
front cabinet and turn the main power switch to the “OFF” opsi-
tion.
3)
Remove the power plug of the main unit from the outlet.
B. Attach the fax box unit to the rear part of the
main unit.
1)
Remove the two screws from the rear cabinet of the main unit.
2)
Attach the supplied step screw to one of the two positions from
which the screws are removed.
which the screws are removed.
3)
Insert the step screw into the mounting hole of the fax box unit.
4)
Use a screw that has been removed in step 1) to secure the
fax box unit.
fax box unit.
C. Pull out the control PWB.
1)
Push the location indicated in the illustration to unlock, and
remove the ozone filter cover from the right cabinet rear.
remove the ozone filter cover from the right cabinet rear.
2)
Remove the screw from the right cabinet rear and remove the
right cabinet rear.
right cabinet rear.
Line cable:
Australia
M3 Screw:
Installation
directions:
directions:
OFF
2
Screw
Click on the first or last page to see other MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man18) service manuals if exist.