Sharp MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man18) Service Manual ▷ View online
MX-M503N MX-FN11 9 – 8
13) Tighten the caster fixing screws so that the indicator scale is
fit.
14) Install the rear lower cover with the fixing screws.
15) Install the auxiliary wheels with the fixing screws.
16) Install the spanner for adjustment to inside the front lower door.
17) Close the front cover, and secure it with the fixing screws.
18) Attach the fixing screw, and close the front upper door.
MX-M503N MX-FN11 9 – 9
19) Attach the front lower cover with the fixing screw.
I. Connection of the finisher
1)
Engage the finisher to the main unit.
2)
Open the front cover of finisher.
3)
Fix the finisher to the main unit with the step screw B (Package
part No. 4).
part No. 4).
4)
Close the front cover.
5)
Remove the screw, and remove the connector cover on rear
side of the finisher.
side of the finisher.
6)
Install the Step screw B (Package part No. 4).
7)
Attach the connector cover on rear side of the finisher.
MX-M503N MX-FN11 9 – 10
J. Connection of connector to the main unit
1)
Connect two connectors of the finisher to the main unit, and
tighten the screws.
tighten the screws.
K. Staple position label attachment
1)
Attach the label to the position indicated in the figure.
[For scanner] (Package part No. 9)
[For scanner] (Package part No. 9)
[For DSPF/RSPF] (Package part No. 10)
L. Turn ON the main power switch of the main
unit
1)
Connect the power plug of the main unit into the power outlet.
2)
Open the front cabinet of the main unit. Turn ON the power
switch in the front cabinet.
switch in the front cabinet.
3)
Turn ON the power switch on the operation panel.
Label attachment
reference
reference
* Corner of the
"upper cabinet rear"
Corner R end fitting
Corner R end fitting
1mm
1mm
1mm
1mm
DSPF
RSPF
ON
MX-M503N MX-PNX6A/B/C/D 10 – 1
MX-M503N
Service Manual
[10] MX-PNX6A/B/C/D
1. Unpacking
A. Pulling out of the punch unit
1)
Pull out the punch unit.
B. Removal of the protection material
1)
Remove the fixing tape and protection material.
2)
Open the front cover, and open the top cover.
3)
Remove the screws, and remove the fixing material. (2 posi-
tions)
tions)
4)
Close the top cover, and close the front cover.
1
2
1
2
Click on the first or last page to see other MX-M363N / MX-M363U / MX-M503N / MX-M503U (serv.man18) service manuals if exist.