Sharp MX-M266N / MX-M316N / MX-M356N (serv.man5) Service Manual ▷ View online
MX-M265N MX-NSX1 (NETWORK SCANNER EXPANSION KIT) 13 – 1
MX-M265N
Service Manual
[13] MX-NSX1 (NETWORK SCANNER EXPANSION KIT)
1. Unpacking
A. Packed items check
2. Installation
A. Enable setting of functions
1)
Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2)
After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
switch on the operation panel of the machine, and turn OFF
the main power switch.
3)
Turn ON the main power switch and the power switch on the
operation panel.
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Operation manual
1
1
2
MX-FX11 (FACSIMILE EXPANSION KIT) 14 – 1
4
4
Service Manual
[14] MX-FX11 (FACSIMILE EXPANSION KIT)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Rear cabinet removal
1)
Remove the rear cabinet.
B. I/F cable connection
1)
Connect the I/F cable to the MFP connector PWB, and fix the
binding band with the M3 screw (Item No.6) included in the
package.
binding band with the M3 screw (Item No.6) included in the
package.
C. Rear cabinet attachment
1)
Remove the notch on the rear cabinet.
2)
Attach the rear cabinet and pass the harness to the cutout
part.
part.
No.
Name
Quantity
1
Fax unit
1
2
Line cable
1
3
Ferrite core
2
4
Step screw (M4)(Not used)
1
5
Step screw (M3)(Not used)
1
6
M3 screw
1
7
Binding band (Not used)
1
8
Line cable
1
2
1
4
3
5
6
8
U.K
France
Germany
Australia
For othe destinations
7
M3 screw
(Item No.6)
4
: ‘16/Sep.
4
4
MX-FX11 (FACSIMILE EXPANSION KIT) 14 – 2
D. FAX unit installation
Attach the step screw (included in the main unit) and hang the Fax
unit on the step screw. Fix the Fax unit with the screw which were
removed from the rear cabinet.
unit on the step screw. Fix the Fax unit with the screw which were
removed from the rear cabinet.
E. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
F. Destination setting
1)
Enter the SIM26-6 mode.
2)
Check to confirm that the destination setting of the machine
matches the specifications of the FAX destination. If not, the
FAX may not function properly.
matches the specifications of the FAX destination. If not, the
FAX may not function properly.
G. Clear the FAX related software switches
1)
Enter the SIM66-2 mode.
2)
Press DEST CODE button.
3)
Take a note of the corresponding destination code.
4)
Press BACK button to return to the code entry mode.
5)
Enter the destination code taken in procedure 3), and press
SET button.
SET button.
6)
Press EXECUTE and YES buttons.
H. Line cable connection
1)
Connect the line cable on the line to the modular jack indicated
as “LINE.”
as “LINE.”
MEMO: When connecting the line cable (to LINE or TEL), wind the
line cable two turns or one turn around the included ferrite core as
shown in the figure, and connect to the modular jack which is
marked with “LINE.”
line cable two turns or one turn around the included ferrite core as
shown in the figure, and connect to the modular jack which is
marked with “LINE.”
MEMO: After connection, perform the setting of “External tele-
phone connection” of the system setting (administrator).
phone connection” of the system setting (administrator).
(Included in the main unit)
FAX fixing step screw
Except Taiwan, Brazil,
South Africa
South Africa
Taiwan, Brazil,
South Africa
South Africa
About
10 cm
10 cm
2 turns
About
10 cm
10 cm
1 turn
4
4
: ‘16/Sep.
MX-M316N MX-FWX1 (INTERNET FAX EXPANSION KIT) 15 – 1
MX-M316N
Service Manual
[15] MX-FWX1 (INTERNET FAX EXPANSION KIT)
1. Unpacking
A. Packed items check
2. Installation
NOTE: To install MX-FWX1, the MX-HD14 (HARD DISK EXPAN-
SION KIT) is required.
NOTE: In order to specify the address of the Internet Fax with the
PC-FAX driver, the PC-FAX driver must be updated by the
Internet Fax expansion kit.
Internet Fax expansion kit.
A. Enable setting of functions
1)
Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2)
After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
switch on the operation panel of the machine, and turn OFF
the main power switch.
3)
Turn ON the main power switch and the power switch on the
operation panel.
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Product key sheet
1
1
2
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man5) service manuals if exist.