Sharp MX-M266N / MX-M316N / MX-M356N (serv.man4) Service Manual ▷ View online
MX-M356NV MX-TR18 N (JOB SEPARATOR) 9 – 1
MX-M356NV
Service Manual
[9] MX-TR18 N (JOB SEPARATOR)
1. Parts included
2. Installation
NOTE: Turn off the main switch of the machine and then remove
the power plug of the machine from the outlet.
1)
Remove the rear cabinet.
2)
Remove the right cabinet middle and the right cover bottom.
3)
Install the second paper exit UN.
M4 x 8 S tight (2pcs)
4)
Pass the harness (packed together with the unit) of the second
paper exit unit though inside of the frame plate as shown in the
figure.
paper exit unit though inside of the frame plate as shown in the
figure.
Install the second paper exit unit to the machine, and fix it with
the screws which are packed together with the finisher. Con-
nect the connector of the harness.
the screws which are packed together with the finisher. Con-
nect the connector of the harness.
5)
Connect the connector of the harness to the PWB.
Job separator unit
Right door paper
guide
guide
Second paper exit
unit
unit
P-TIGHT
M4 x 10 (1 pcs.)
M4 x 10 (1 pcs.)
S-TIGHT
M4 x 8 (2 pcs.)
M4 x 8 (2 pcs.)
Conversion harness (Not use)
MX-M356NV MX-TR18 N (JOB SEPARATOR) 9 – 2
6)
Disengage the pawls and remove the paper exit dummy cover.
7)
Remove the paper holding arm, install it to job separator AS.
(Same as the current state)
(Same as the current state)
8)
Remove the current the second paper exit right door unit and
fix the bundled second paper exit right door unit to the right
cabinet middle unit.
fix the bundled second paper exit right door unit to the right
cabinet middle unit.
9)
Install the job separator tray AS.
10) Install the rail dummy cover part to the guide rail so that slide
the over part from front side to rear side.
After that, insert the rib of tray part to the location of insertion of
the second paper exit tray holder.
Check that it is caught while being pushing up the tray.
After that, insert the rib of tray part to the location of insertion of
the second paper exit tray holder.
Check that it is caught while being pushing up the tray.
11) Install the right cabinet middle and the right cover bottom.
12) Install the rear cabinet.
13) Job separator setting in simulation 26-1.
Paper holding arm
MX-M356NV MX-PB16 (PRINTER EXPANSION KIT) 10 – 1
MX-M356NV
Service Manual
[10] MX-PB16 (PRINTER EXPANSION KIT)
1. Unpacking
A. Packed items check
2. Installation
A. Enable setting of functions
1)
Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2)
After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
switch on the operation panel of the machine, and turn OFF
the main power switch.
3)
Turn ON the main power switch and the power switch on the
operation panel.
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Operation manual
1
1
2
MX-M356NV MX-PK11 (PS3 EXPANSION KIT) 11 – 1
MX-M356NV
Service Manual
[11] MX-PK11 (PS3 EXPANSION KIT)
1. Unpacking
A. Packed items check
2. Installation
NOTE: To install the MX-PK11 (PS3 EXPANSION KIT), the MX-
PB16 (PRINTER EXPANSION KIT) is required.
A. Enable setting of functions
1)
Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2)
After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
switch on the operation panel of the machine, and turn OFF
the main power switch.
3)
Turn ON the main power switch and the power switch on the
operation panel.
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM (For Screen Font)
1
2
Product key sheet
1
1
2
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man4) service manuals if exist.