Sharp MX-M266N / MX-M316N / MX-M356N (serv.man4) Service Manual ▷ View online
MX-M356NV MX-CS12 N/CS13 N (500-SHEET PAPER TRAY) 4 – 4
8)
Close the rear cabinet on MX-CS12 N and tighten screws
(M4x12P).
(M4x12P).
9)
Close the Rear cabinet on main unit.
10) Set up the size for paper feed tray and attach Size indication
label.
11) Insert each tray back to its position.
(2)
Case B
1)
Pull out the tray of MX-CS12 N.
2)
Remove the rear cabinet of MX-CS12 N.
3)
Place the main unit and MX-CS12 N with caring the positions
of the boss parts of MX-CS13 N.
of the boss parts of MX-CS13 N.
MX-M356NV MX-CS12 N/CS13 N (500-SHEET PAPER TRAY) 4 – 5
Lower the machine from straight above the optional paper feed
unit not to damage the gears on the optional paper feed unit.
unit not to damage the gears on the optional paper feed unit.
4)
Pull out the tray of MX-CS13 N.
5)
Attach the main unit with MX-CS12 N and MX-CS13 N with the
plates (Packed item Plate) and the screws (Packed items
M4x12P).
plates (Packed item Plate) and the screws (Packed items
M4x12P).
6)
When the MX-CS13 N is fixed to the MX-CS12 N, connect the
harness from the MX-CS13 N to the MX-CS12 N.
harness from the MX-CS13 N to the MX-CS12 N.
7)
Close the rear cabinet of each paper tray, and fix it with the
screw (M4x12P).
screw (M4x12P).
8)
Set up the size of the paper tray, and attach the side indication
label.
label.
9)
Insert each tray back to its position.
<Front right>
<Front left>
<Rear right>
<Rear left>
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
MX-CS13 N
MX-CS12 N
MX-M356NV MX-CS12 N/CS13 N (500-SHEET PAPER TRAY) 4 – 6
(3)
Case C
1)
Pull out the tray of MX-CS13 N.
2)
Remove the rear cabinet of MX-CS13 N.
3)
Place the main unit and MX-CS12 N/CS13 N with caring the
positions of the boss parts of MX-CS12 N.
positions of the boss parts of MX-CS12 N.
Lower the machine from straight above the optional paper feed
unit not to damage the gears on the optional paper feed unit
unit not to damage the gears on the optional paper feed unit
MX-M356NV MX-CS12 N/CS13 N (500-SHEET PAPER TRAY) 4 – 7
4)
Pull out the tray of MX-CS12 N.
5)
Attach the main unit with MX-CS13 N and MX-CS12 N with the
plates (Packed item Plate) and the screws (Packed items
M4x12P).
plates (Packed item Plate) and the screws (Packed items
M4x12P).
6)
When the MX-CS12 N is fixed to the MX-CS13 N, connect the
harness from the MX-CS12 N to the MX-CS13 N. At this
moment, pass the harness to the wire saddles and roll the har-
ness up three times.
harness from the MX-CS12 N to the MX-CS13 N. At this
moment, pass the harness to the wire saddles and roll the har-
ness up three times.
7)
Close the rear cabinet of each paper tray, and fix it with the
screw (M4x12P).
screw (M4x12P).
8)
Set up the size of the paper tray, and attach the side indication
label.
label.
9)
Insert each tray back to its position.
C. Turn on the power of the main unit
1)
Power to the main unit.
2)
Turn ON the power switch.
<Front right>
<Front left>
<Rear right>
<Rear left>
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
M4 x 12P
MX-CS12 N
MX-CS13 N
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man4) service manuals if exist.