Sharp MX-M266N / MX-M316N / MX-M356N (serv.man4) Service Manual ▷ View online
MX-M356NV MX-RP19 N/RP20 N (REVERSING SINGLE PASS FEEDER) 3 – 2
7)
Attach the RSPF.
8)
Remove the rear upper cabinet cover.
9)
Fix the earth wire first.
10) Connect the connector.
Identification of the correct/ wrong insertion of 12-pole connec-
tor (SCU PWB:CN15) on SUC PWB:
tor (SCU PWB:CN15) on SUC PWB:
Positioning protrusions on the insertion side of the connector
are placed at the left: ”Correct”
are placed at the left: ”Correct”
11) Fix the rear upper cabinet cover.
Not deformed
[OK] (Correct]
<Receptacleside(CN15)>
MX-M356NV MX-CS12 N/CS13 N (500-SHEET PAPER TRAY) 4 – 1
MX-M356NV
Service Manual
[4] MX-CS12 N/CS13 N (500-SHEET PAPER TRAY)
1. Unpacking
A. Removal of the 500 sheet paper feed unit
B. Removal of the fixing tape and protection
material
1)
Remove the 500 sheet paper feed unit from the polyethylene
bag, and remove the fixing tape and the protection material.
bag, and remove the fixing tape and the protection material.
Since Rear cabinet has not been screwed, remove
the tape and keep the Rear cabinet out of reach.
2)
Remove the turn fastener and the tag.
C. Packed items check
MX-CS12 N
*1:This part is for fixing this desk unit to the other models.
Therefore, this part is not used with this model.
MX-CS13 N
*1:This part is for fixing this desk unit to the other models.
Therefore, this part is not used with this model.
No.
Name
Quantity
1
2nd Connection Drive unit *1
1
2
Plate
4
3
Fixing screws (M4 x 12P)
8
4
Fixing screws (M4 x 10S)
4
5
Fixing screws (M3x 6S) *1
2
6
Edge holder
1
7
2ND sheet *1
1
8
Size indication label
1
9
Conversion harness *1
1
No.
Name
Quantity
1
Plate
4
2
Fixing screws (M4 x 12P)
10
3
Size indication label
1
4
Conversion harness *1
1
1
2
3
4
5
6
7
8
9
1
2
3
4
MX-M356NV MX-CS12 N/CS13 N (500-SHEET PAPER TRAY) 4 – 2
D. Model Type and Combination of Paper Feed
Options
List of accessories for each case
2. Installation
<Precautions for installation>
Before execution of installation, check to confirm that the data lamp
under it are not lighted or blinking.
under it are not lighted or blinking.
A. Turn off the power of the main unit
1)
Check to confirm that the operation panel is turned OFF, and
then turn OFF the power switch.
then turn OFF the power switch.
2)
Disconnect the power plug from the power outlet.
B. Install the main unit to the MX-CS12 N/CS13 N
(1)
Case A
1)
Pull out the tray.
2)
Remove the Rear cabinet.
MX-CS12 N
Case A
Standard
Standard
TYPE 2
TYPE 1
Case B
Case C
Case C
MX-CS13 N
MX-CS12 N
MX-CS13 N
MX-CS12 N
Case B
No.
Name
Case A
Case B
Case C
MX-
CS12 N
CS12 N
1
2nd Connection Drive unit
0
-
0
2
Plate
4
-
4
3
Fixing screws (M4 x 12P)
6
-
10
4
Fixing screws (M4 x 8S)
4
-
0
5
Fixing screws (M3x 6S)
0
-
0
6
Edge holder
1
-
0
7
2nd sheet
0
-
0
8
Size indication label
1
-
1
No.
Name
Case A
Case B
Case C
MX-
CS13 N
CS13 N
1
Plate
-
4
-
2
Fixing screws (M4 x 12P)
-
10
-
3
Size indication label
-
1
-
MX-M356NV MX-CS12 N/CS13 N (500-SHEET PAPER TRAY) 4 – 3
3)
Attach the edge holder.
4)
Place the main unit with caring the positions of the boss parts
of MX-CS12 N.
of MX-CS12 N.
Lower the machine from straight above the optional paper feed
unit not to damage the gears on the optional paper feed unit
unit not to damage the gears on the optional paper feed unit
5)
Pull out the tray of MX-CS12 N.
6)
Attach the main unit and MX-CS12 N with the plates (Packed
item Plate) and the screws (Packed items M4x8S and
M4x12P).
item Plate) and the screws (Packed items M4x8S and
M4x12P).
7)
Pass the harness of MX-CS12 N to the wire saddles and con-
nect the harness to the MFPC PWB as shown in the figure.
Then, fix the wire saddles to the machine as shown in the fig-
ure.
nect the harness to the MFPC PWB as shown in the figure.
Then, fix the wire saddles to the machine as shown in the fig-
ure.
<Front right>
<Rear left>
<Rear right>
<Front left>
M4 x 8S
M4 x 8S
M4 x 12P
M4 x 8S
M4 x 12P
M4 x 12P
M4 x 8S
M4 x 12P
Click on the first or last page to see other MX-M266N / MX-M316N / MX-M356N (serv.man4) service manuals if exist.