Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man7) Service Manual ▷ View online
MX-M264U SIMULATION 6 – 16
22
22-1
Purpose
Adjustment/Setting/Operation data output/
Check
Check
Function (Purpose)
Used to check the print count value in each
section and each operation mode.
(Used to check the maintenance timing.)
section and each operation mode.
(Used to check the maintenance timing.)
Section
Operation/Procedure
Change the display page with scroll key on the touch panel.
22-2
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the total number of misfeed
and troubles. (When the number of total
jam is considerably great, it is judged as
necessary for repair.)
and troubles. (When the number of total
jam is considerably great, it is judged as
necessary for repair.)
Section
Operation/Procedure
The paper jam, trouble counter value is displayed.
22-3
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check misfeed positions and the
misfeed count of each position.
* Presumption of the faulty point by this
data is possible.
misfeed count of each position.
* Presumption of the faulty point by this
data is possible.
Section
Operation/Procedure
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
up to 50 items. (The old ones are deleted sequentially.)
22-4
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the trouble (self diag) his-
tory.
tory.
Section
Operation/Procedure
The trouble history is displayed from the latest one up to 30 items.
(The old ones are deleted sequentially.)
(The old ones are deleted sequentially.)
22-5
Purpose
Others
Function (Purpose)
Used to check the ROM version of each
unit (section).
unit (section).
Section
Firmware
Operation/Procedure
The ROM version of the installed unit in each section is displayed.
When there is any trouble in the software, use this simulation to
check the ROM version, and upgrade the version if necessary.
When there is any trouble in the software, use this simulation to
check the ROM version, and upgrade the version if necessary.
22-6
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to output the setting/adjustment data
(simulation, FAX soft switch, counter), the
firmware version, and the counter list.
(simulation, FAX soft switch, counter), the
firmware version, and the counter list.
Section
Operation/Procedure
* When installing or servicing, this simulation is executed to print
the adjustment data and set data for use in the next servicing.
(Memory trouble, PWB replacement, etc.)
(Memory trouble, PWB replacement, etc.)
1)
Select the print list mode with 10-key.
2)
Press [EXECUTE] key to start printing the list selected in step
1).
1).
Item
Display
Content
Total
output
quantity
output
quantity
TOTAL OUT
Total output
quantity of black
and white
quantity of black
and white
All prints including
jams
jams
Total use
quantity
quantity
TOTAL
Total use quantity
of black and white
of black and white
Effective paper
(including self print,
excluding jams)
(including self print,
excluding jams)
Copy
COPY
Black and white
copy counter
copy counter
Billing target
(excluding self print)
(excluding self print)
Print
PRINT
Black and white
print counter
print counter
Billing target
(excluding self print)
(excluding self print)
Document
filing
filing
DOC FIL
Black and white
document filing
print counter
document filing
print counter
Billing target
(excluding self print)
(excluding self print)
Other
OTHER
Black and white
other counter
other counter
Self print quantity
PCI
PCI OPE-
TIME
TIME
PCI counter
PCI accumulated
operation time (H)
operation time (H)
MACHINE JAM
Machine JAM counter
RSPF JAM
RSPF JAM counter
TROUBLE
Trouble counter
S/N
Serial No. (The codes for November and December are
"X" and "Y" respectively.)
"X" and "Y" respectively.)
ICU (MAIN)
ICU (Main section)
ICU (BOOT)
ICU (Boot section)
ICU (SUB)
ICU (Sub section) (ARM9)
LANGUAGE
Language support data version
GRAPHIC
Graphic data for LCD
PCL (MAIN)
PCL (Main section)
PCU
PCU
SCU
SCU
FAX1 (MAIN)
FAX 1-Line (Main section)
FINISHER
Finisher
NIC
NIC
POWER-CON
Power controller
E-MANUAL
Operation manual (HDD storage)
(except 20cpm machine)
(except 20cpm machine)
WATER MARK
Watermark (HDD storage)
ESCP
ESCP font ROM
PDL
PDL font ROM
PCI PCI
Item/Display
Print list
mode
Print content
A
DATA PATTERN
1
Firmware version,
counter data, etc.
counter data, etc.
2
Data related to the process control
MX-M264U SIMULATION 6 – 17
22-8
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the number of operations
(counter value) of the finisher, the RSPF,
and the scan (reading) unit.
(counter value) of the finisher, the RSPF,
and the scan (reading) unit.
Section
Operation/Procedure
The counter values of the finisher, the RSPF, and the scanner
related counters are displayed.
related counters are displayed.
22-9
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the number of use (print
quantity) of each paper feed section.
quantity) of each paper feed section.
Section
Paper feed, ADU
Operation/Procedure
The counter values related to paper feed are displayed.
22-10
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the system configuration
(option, internal hardware).
(option, internal hardware).
Section
Operation/Procedure
The system configuration is displayed.
(The model names of the installed devices and options are dis-
played.)
played.)
(*) Displayed only in the OSA models.
22-11
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the use frequency (send/
receive) of FAX.
(Only when FAX is installed)
receive) of FAX.
(Only when FAX is installed)
Section
FAX
Operation/Procedure
The values of the FAX send counter and the FAX receive counter
are displayed.
are displayed.
22-12
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the RSPF misfeed positions
and the number of misfeed at each posi-
tion. (When the number of misfeed is con-
siderably great, it can be judged as
necessary for repair.)
and the number of misfeed at each posi-
tion. (When the number of misfeed is con-
siderably great, it can be judged as
necessary for repair.)
Section
RSPF
Operation/Procedure
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
up to 50 items. (The old ones are deleted sequentially.)
SPF
Document feed quantity
(The number of sheets of discharged documents)
(The number of sheets of discharged documents)
SCAN
Number of times of scan
STAPLER
Staple counter
STAMP
Stamp counter
COVER
Document cover open/close counter
HP_ON
Number of scanner HP detection
OC LAMP TIME
Total lighting time of the scanner lamp
(* hour * minutes)
(* hour * minutes)
TRAY1
Paper feed counter (Paper feed tray 1)
TRAY2
Paper feed counter (Paper feed tray 2)
TRAY3
Paper feed counter (Paper feed tray 3)
TRAY4
Paper feed counter (Paper feed tray 4)
MFT TOTAL
Manual paper feed counter (Total)
MFT HEAVY
Manual paper feed counter (Heavy paper)
MFT OHP
Manual paper feed counter (OHP)
MFT ENV
Manual paper feed counter (Envelope)
ADU
ADU paper feed counter (Paper reverse section)
MACHINE
MX-M264U
Main unit
MX-M314U
MX-M354U
MX-M264N
MX-M314N
MX-M354N
MX-M264NV
MX-M354NV
MX-M264NR
MX-M354NR
RSPF
MX-RP15
Reversing single pass feeder
STANDARD
STAMP
AR-SU1
Finish stamp
DESK
MX-DE17
First stage paper feed tray
MX-DE18
Second state paper feed tray
MX-DE24
First stage paper feed tray
FINISHER
MX-FN23
Inner finisher
MX-TR11/
STANDARD
STANDARD
Job separator
FAX1
MX-FX11
Facsimile expansion kit
PRINTER
MX-PB15
Printer expansion kit (PCL)
STANDARD
PS
MX-PK11
PS expansion kit
SECURITY
MX-FR37/37U
Data security kit (commercial version)
AIM
MX-AMX1
Application integration module
SDRAM (SYS)
*****MB
SDRAM capacity
SDRAM (ICU)
*****MB
SDRAM capacity
HDD
*****MB
Hard disk capacity
SD
*****MB
SD Card capacity
NIC
STANDARD
NIC
BARCODE
MX-PF10
Bar code font
INTERNET-FAX
MX-FWX1
Internet Fax expansion kit
ACM(*)
MX-AMX2
Application communication module
EAM(*)
MX-AMX3
External account module
PCI
NOTE
PCI generating unit
CONNECT
RIGHT TRAY
MX-TE10
Paper exit tray unit
FAX OUTPUT
FAX print quantity counter (for line 1)
FAX SEND
FAX send counter
FAX RECEIVED
FAX receive counter
SEND IMAGES
FAX send quantity counter (for line 1)
SEND TIME
FAX send time
RECEIVED TIME
FAX receive time
2
3
3
‘13/Oct
MX-M264U SIMULATION 6 – 18
22-13
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the operating time of the
process section (OPC drum, DV unit, toner
cartridge) and the fusing unit
process section (OPC drum, DV unit, toner
cartridge) and the fusing unit
Section
Process
Operation/Procedure
The number of prints and the number of rotations in the process
section are displayed.
section are displayed.
22-14
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to display the use status of the toner
cartridge.
cartridge.
Section
Process
Operation/Procedure
The status of the toner cartridge is displayed.
*1: The sum total of LARGE/SMALL is displayed. For the remaining amount, it is common to LARGE/SMALL.
*2: Displayed only in the domestic specifications. The remaining amount is not displayed.
22-18
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to display the user data delete history.
Section
Operation/Procedure
The date and time of the user data delete are displayed.
Item/Display
Content
Counter
RPM
Number of
use days
Life meter
(Unit: +/-1%)
Number of
remaining
days
MAINTENANCE ALL
Maintenance counter (Total)
Max. 8
Not displayed
0 - 999
0 - 100(%)
0 - 365
FUSING ROLLER
Fusing roller
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
PRESSURE ROLLER
Pressure roller
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
SEPARATE PAWL
Separation pawl
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
CLEANING ROLLER
Cleaning roller
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
TC ROLLER
Transfer roller
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
OZONE FILTER
Ozone filter
Max. 8
Not displayed
0 - 999
0 - 100(%)
0 - 365
DEVE CTRG(K)
Developer cartridge K
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
DRUM CTRG(K)
Drum cartridge K
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
MAIN CHARGER(K)
Main charger K
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
DRUM BLADE(K)
Drum blade K
Max. 8
Max. 8
0 - 999
0 - 100(%)
0 - 365
TONER CTRG(K)
Toner cartridge K
Max. 8
Max. 8
0 - 999
0 - 100(%)
Not displayed
Display item
Content
Accumulated No. of
installed cartridges (Unit)
Accumulated No. of near
near end (Unit)
Accumulated No. of
end (Unit)
Remaining quantity
(Unit: %)
INSTALL
NN END
END
RESIDUAL
TONER (K)*
1
Toner number counter (K)
0 - 510
0 - 510
0 - 510
0-25%
25-50%
50-75%
50-75%
75-100%
LARGE*
2
Toner number counter
(K LARGE)
(K LARGE)
0 - 255
0 - 255
0 - 255
SMALL*
2
Toner number counter
(K SMALL)
(K SMALL)
Display item
Content
Item name
Date
START
Year/month/day/hour/min.
Delete history (Date and time
of operation start)
of operation start)
END
Year/month/day/hour/min.
Delete history (Date and time
of operation end)
of operation end)
MX-M264U SIMULATION 6 – 19
22-19
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to check the values of the counters
related to the scan - image send.
related to the scan - image send.
Section
Operation/Procedure
Used to display the counter value related to the network scanner
Change the display with scroll key.
22-40
Purpose
Error contents display
Function (Purpose)
Used to display the error code list and the
contents.
contents.
Section
Operation/Procedure
1)
Select the main error code.
The sub error code and the contents are displayed.
22-90
Purpose
Adjustment/Setting/Operation data check
Function (Purpose)
Used to output the various set data lists.
Section
Operation/Procedure
1)
Change the display with scroll key.
2)
Select the print target with the keys on the touch panel.
3)
Press [EXECUTE] key to start self print of the list.
* When the data list print of system setting is inhibition in DSK
model, this setting is invalid.
Item/Display
Content
Network
scanner
scanner
NET SCN
ORG_B/W
ORG_B/W
Network scanner document read quantity
counter (B/W scan job)
counter (B/W scan job)
NET SCN
ORG_CL
ORG_CL
Network scanner document read quantity
counter (Color scan job)
counter (Color scan job)
Internet
FAX
FAX
INTERNET FAX
OUTPUT
OUTPUT
Number of internet FAX output
INTERNET FAX
SEND OUTPUT
SEND OUTPUT
Number of internet FAX sending page
INTERNET FAX
RECEIVE
RECEIVE
Number of internet FAX receive
INTERNET FAX
SEND
SEND
Number of internet FAX send
E-Mail
MAIL
COUNTER
COUNTER
Number of times of E-MAIL send
FTP
FTP COUNTER
Number of FTP send
Other
SMB SEND
Number of SMB send
USB CNT
Number of times of USB storage
TRIAL
MODE_B&C
MODE_B&C
Trial mode counter
(B/W & COLOR scan job)
(B/W & COLOR scan job)
SCAN TO
HDD_B/W
HDD_B/W
SCAN TO HDD record quantity (B/W)
SCAN TO
HDD_CL
HDD_CL
SCAN TO HDD record quantity
(COLOR)
(COLOR)
All setting list (*)
ALL CUSTOM SETTING LIST
Printer test page
PCL SYMBOL SET LIST
PCL INTERNAL FONT LIST
PCL EXTENDED FONT LIST
PS FONT LIST
PS KANJI FONT LIST (Japan)
PS EXTENDED FONT LIST
NIC PAGE
Address registration list (*)
INDIVIDUAL LIST
GROUP LIST
PROGRAM LIST (Output Disable)
MEMORY BOX LIST
ALL SENDING ADDRESS LIST
Document filing list (*)
DOCUMENT FILING FOLDER LIST
System setting list
ADMIN. SETTINGS LIST (COPY)
ADMIN. SETTINGS LIST (PRINT)
ADMIN. SETTINGS LIST (IMAGE
SEND)
SEND)
ADMIN. SETTINGS LIST (DOC FILING)
ADMIN. SETTINGS LIST (SECURITY)
ADMIN. SETTINGS LIST (COMMON)
ALL ADMINISTRATOR SETTINGS LIST
Receive rejection number table
ANTI JUNK FAX NUMBER LIST
Receive rejection/allow
address
domain table
address
domain table
ANTI JUNK MAIL/DOMAIN NAME LIST
To E-mail
Transfer table list
Transfer table list
INBOUND ROUTING LIST
To administrator Transfer list
DOCUMENT ADMIN LIST
Web setting list
WEB SETTING LIST
Meta data set list
METADATA SET LIST
Click on the first or last page to see other MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man7) service manuals if exist.