Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man7) Service Manual ▷ View online
MX-M264U SIMULATION 6 – 28
Item E (TONER END COUNT) setting value and printable quan-
tity
tity
List of Default values and set values for each destination
Contents of set items
A: Enable/Disable setting of the toner preparation message display.
B: The toner remaining quantity at which the toner preparation
message is displayed.
message is displayed.
C: Enable/Disable setting of the toner preparation message display
when the toner near end status is reached.
when the toner near end status is reached.
D: Machine operation at toner end
E: Number of allowable copy/print/FAX when the toner near end
message is displayed. (Range: 0 - 160 sheets)
message is displayed. (Range: 0 - 160 sheets)
The number of output print allowed in item D is based on the
assumption that the sheets are of A4 size with print ratio of 6%.
(The number of outputs allowed differs depending on the paper
size and the print ratio.)
assumption that the sheets are of A4 size with print ratio of 6%.
(The number of outputs allowed differs depending on the paper
size and the print ratio.)
CAUTION: When item A is set to "0" and item E is properly set,
printing can be made after toner near end. However,
improper phenomena such as insufficient density, thin
spots, or improper color balance may result depending
on the using conditions. When item E is set to "1" print-
ing is disabled after toner near end. In this case, toner
end display is made in the toner near end status, and
copy/print/FAX outputs are disabled.
improper phenomena such as insufficient density, thin
spots, or improper color balance may result depending
on the using conditions. When item E is set to "1" print-
ing is disabled after toner near end. In this case, toner
end display is made in the toner near end status, and
copy/print/FAX outputs are disabled.
26-73
Purpose
Setting
Function (Purpose)
Enlargement continuous shoot, A3 wide
copy mode image loss (shade delete quan-
tity) adjustment
copy mode image loss (shade delete quan-
tity) adjustment
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
(shade delete quantity) is increased.
26-74
Purpose
Setting
Function (Purpose)
Used to set the OSA trial mode.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
B
REMAINING
TONER
LEVEL
TONER
LEVEL
0.45
8
Toner
preparation at
remaining toner
level of 45%
preparation at
remaining toner
level of 45%
0 - 9
4
0.5
9
Toner
preparation at
remaining toner
level of 50%
preparation at
remaining toner
level of 50%
C
TONER NEAR END
(0:YES 1:NO)
(0:YES 1:NO)
0
The toner near
end message is
displayed.
end message is
displayed.
0 - 1
List of
Default
values and
set values
for each
destination
Default
values and
set values
for each
destination
1
The toner near
end message is
not displayed.
end message is
not displayed.
D
TONER END
1
Operation setup
1
1
1 - 3
-
2
Operation setup
2
2
3
Operation setup
3
3
E
TONER END
COUNT
COUNT
Setting of the
number of copy/print/
FAX outputs Enable
after TONER NEAR
END.
number of copy/print/
FAX outputs Enable
after TONER NEAR
END.
1 - 5
4
F
TONER E-MAIL
ALERT
ALERT
0
Low status send
of E-mail alert
(When the toner
preparation
message is
displayed) (in
near near toner
end)
of E-mail alert
(When the toner
preparation
message is
displayed) (in
near near toner
end)
0 - 1
1
1
Low status send
of E-mail alert
(near toner end)
of E-mail alert
(near toner end)
Setting value
Printable quantity at A4/6% equivalent conversion
1
0
2
20
3
40
4
80
5
160
Destination
Setting value
Toner preparation
message
Toner near end message
U.S.A
0 (Displayed)
0 (Displayed)
CANADA
0 (Displayed)
0 (Displayed)
INCH
0 (Displayed)
0 (Displayed)
JAPAN
0 (Displayed)
1 (Not Displayed)
AB_B
0 (Displayed)
0 (Displayed)
EUROPE
0 (Displayed)
0 (Displayed)
U.K.
0 (Displayed)
0 (Displayed)
AUS.
0 (Displayed)
0 (Displayed)
AB_A
0 (Displayed)
0 (Displayed)
CHINA
0 (Displayed)
0 (Displayed)
Item/Display
Content
Setting
range
Default
value
Item/Display
Content
Setting
range
Default value
A
DELETING
SHADOW ADJ
(M)
SHADOW ADJ
(M)
Rear frame side
image loss quantity
(shade delete
quantity) adjustment
image loss quantity
(shade delete
quantity) adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
(Adjustment
amount:
0.1mm/step)
B
DELETING
SHADOW ADJ (S)
SHADOW ADJ (S)
Lead edge image
loss quantity (shade
delete quantity)
adjustment
loss quantity (shade
delete quantity)
adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
(Adjustment
amount:
0.1mm/step)
Item/Display
Content
Setting
range
Default
value
A
OSA TRIAL MODE
(0: YES 1: NO)
(0: YES 1: NO)
0
Used to set the
OSA trial mode.
OSA trial mode.
0 - 1
1
1
OSA trial mode is
canceled.
canceled.
MX-M264U SIMULATION 6 – 29
26-78
Purpose
Setting
Function (Purpose)
Used to set the password of the remote
operation panel.
operation panel.
Section
Operation/Procedure
1)
Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW".
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
to delete the entered value one digit by one digit.
2)
Press [SET] key.
26-79
Purpose
Setting
Function (Purpose)
Used to set YES/NO of the pop-up display
of user data delete result.
of user data delete result.
Section
Operation/Procedure
1)
Enter the set value with 10-key.
The value for the display operation specification after comple-
tion of user data delete is set.
tion of user data delete is set.
2)
Press [OK] key.
27
27-1
Purpose
Setting
Function (Purpose)
Used to set non-detection of communica-
tion error (U7-00) with RIC. (FSS function)
tion error (U7-00) with RIC. (FSS function)
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
27-2
Purpose
Setting
Function (Purpose)
Used to set the sender's registration num-
ber and the HOST server telephone num-
ber. (FSS function)
ber and the HOST server telephone num-
ber. (FSS function)
Section
Operation/Procedure
1)
Select an item to be set with touch panel.
[USER FAX NO] [SERVA TEL NO]
[USER FAX NO] [SERVA TEL NO]
2)
Enter the set value with 10-key.
3)
Press [SET] key.
The set value in step 2) is saved.
Item/Display
Content
Setting range
Default
value
A
DISP SET
User data delete result
pop-up display ON
pop-up display ON
YES
1
0 (NO)
User data delete result
pop-up display OFF
pop-up display OFF
NO
0
0
Not detection
1
Detection
USER FAX_NO.
Sender registration number (Max. 16 digits)
SERVA TEL_NO.
Host server telephone number (Max. 16 digits)
- If the connection process is not completed
- If the connection process is not completed
normally when registering the FSS, calling to the
HOST may be continuously made every time
when the power is turned ON (from OFF) or
rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
HOST may be continuously made every time
when the power is turned ON (from OFF) or
rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
MX-M264U SIMULATION 6 – 30
27-4
Purpose
Setting
Function (Purpose)
Used to set the initial call and toner order
auto send. (FSS function)
auto send. (FSS function)
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
27-5
Purpose
Setting
Function (Purpose)
Used to set the machine tag No. (This func-
tion allows the host computer to check the
machine tag No.) (FSS function)
tion allows the host computer to check the
machine tag No.) (FSS function)
Section
Communication (RIC/MODEM)
Operation/Procedure
1)
Enter the password (max. 8 digits) with 10-key.
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
to delete the entered value one digit by one digit.
2)
Press [SET] key.
27-6
Purpose
Setting
Function (Purpose)
Used to set of the manual service call.
(FSS function)
(FSS function)
Section
Operation/Procedure
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
Item/Display
Content
Setting
range
Default
value
Remarks
A
FSS MODE
NEB1
Set the FSS MODE
Exclusive for send in NE-B mode
0 - 3
0
1
NEB2
Send/Receive in NE-B mode
1
NFB1
Exclusive for send in NE-F mode
2
For convenience
stores
stores
NFB2
Send/Receive in NE-F mode
3
For convenience
stores
stores
B
RETRY_BUSY
Resend number setting when busy
0 - 15
2
0: No retry
C
TIMER(MINUTE)_BUSY
Resend timer setting (minute) when busy
1 - 15
3
D
RETRY_ERROR
Resend number setting when error
0 - 15
1
0: No retry
E
TIMER(MINUTE)_ERROR
Resend timer setting (minute) when error
1 - 15
1
F
FAX RETRY
Resend number setting when FAX initial connection
0 - 15
2
Unit: Number of times
G
TONER ORDER
TIMING(K)
TIMING(K)
EMPTY
Toner order auto send
timing setting (K)
timing setting (K)
Empty
0 - 11
0
6
NEAR_END
Near end
1
0.05
0.05
2
0.1
0.1
3
0.15
0.15
4
0.2
0.2
5
0.25
0.25
6
0.3
0.3
7
0.35
0.35
8
0.4
0.4
9
0.45
0.45
10
0.5
0.5
11
H
TEMP HISTORY CYCLE
Frequency of acquiring the temperature and humidity history
1 - 1440
60
Unit: min.
I
LOG OUTPUT CAPACITY(PCU)
Log output capacity
0 - 50
30
Unit: [KB]
0
Allow (Default)
1
Inhibit
MX-M264U SIMULATION 6 – 31
27-7
Purpose
Setting
Function (Purpose)
Used to set of the enable, alert callout.
(FSS function)
(FSS function)
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
*1 Alert send timing
27-9
Purpose
Setting
Function (Purpose)
Used to set the paper transport time record-
ing YES/NO threshold value and shading
gain adjustment retry number.
(FSS function)
ing YES/NO threshold value and shading
gain adjustment retry number.
(FSS function)
Section
Operation/Procedure
1)
Select an item to be set with scroll keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
* Items A, B: 0%, standard passing time between sheets of paper;
100%, time for judgment as a jam between sheets of paper.
* Item C: Because of a trouble in shading operation, the number of
retry is actually not registered.
27-10
Purpose
Data clear
Function (Purpose)
Used to clear the trouble prediction history
information. (FSS function)
information. (FSS function)
Section
Operation/Procedure
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The history information of trouble prediction is cleared.
27-11
Purpose
Others
Function (Purpose)
Used to check the serial communication
retry number and the scanner gain adjust-
ment retry number history. (FSS function)
retry number and the scanner gain adjust-
ment retry number history. (FSS function)
Section
Operation/Procedure
The serial communication retry number history and the scanner
gain adjustment retry number history are displayed.
gain adjustment retry number history are displayed.
Item/Display
Content
Setting
range
Default
value
A
FUNCTION
(0:YES 1:NO)
(0:YES 1:NO)
FSS function enable
0
1 (NO)
FSS function disable
1
B
ALERT
(0:YES 1:NO)
(0:YES 1:NO)
Alert call enable (*1)
0
0 (YES)
Alert call disable
1
C
CONNECTION
(0: FAX
1: No Use
2: HTTP)
(0: FAX
1: No Use
2: HTTP)
FAX connection enable
0
0 (FAX)
Not used.
1
HTTP connection enable
2
No alert cause
Initial state / Trouble / Continuous JAM alert
Maintenance
When the maintenance timing is reached.
Service call
When pressing Service call.
Toner send request
When the toner order automatic send setting is
reached.
reached.
Toner collection request
Revision of the toner installation date (only for
a new product)
a new product)
Alert resend
Item/Display
Content
Setting
range
Default
value
A
FEED TIME1
Threshold value of paper
transport time between
sensors (Machine)
transport time between
sensors (Machine)
0 - 100
50(%)
B
FEED TIME2
Threshold value of paper
transport time between
sensors (SPF)
transport time between
sensors (SPF)
0 - 100
50(%)
C
GAIN
ADJUSTMENT
RETRY
ADJUSTMENT
RETRY
Threshold value of the gain
adjustment retry number
adjustment retry number
0 - 20
11
(TIMES)
D
JAM ALERT
Continuous JAM alert
judgment threshold value
(Alert judgment threshold
value for continuous JAM's)
(Setting of the number of
JAM's continuously made
at which it is judged as an
alert.)
judgment threshold value
(Alert judgment threshold
value for continuous JAM's)
(Setting of the number of
JAM's continuously made
at which it is judged as an
alert.)
1 - 100
10
(TIMES)
Target history
Serial communication retry history
Scanner gain adjustment retry history
Paper transport time between sensors
Display Item
Content
Item name
Occurrence date
(Display)
Retry
number
LSU1
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
Serial
communication
retry number
history display
communication
retry number
history display
LSU2
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
DESK1
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
DESK2
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
FINISHER1
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
FINISHER2
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
SCAN GAIN ADJ1
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
Scanner gain
adjustment retry
history
adjustment retry
history
SCAN GAIN ADJ2
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
SCAN GAIN ADJ3
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
SCAN GAIN ADJ4
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
SCAN GAIN ADJ5
Year/month/day
hour: min.: sec.
hour: min.: sec.
8 digits
Scanner gain
adjustment retry
history
adjustment retry
history
Click on the first or last page to see other MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man7) service manuals if exist.