Sharp MX-M200D / MX-M200DK (serv.man8) User Manual / Operation Manual ▷ View online
16
SCAN
Preview screen
(1)
Preview window
Click the [Preview] button in the Set-up screen to
display the scanned image. You can specify the
scanning area by dragging the mouse inside the
window. The inside of the frame that appears
when you drag the mouse will be the scanning
area. To cancel a specified scanning area and
clear the frame, click anywhere outside the frame.
Click the [Preview] button in the Set-up screen to
display the scanned image. You can specify the
scanning area by dragging the mouse inside the
window. The inside of the frame that appears
when you drag the mouse will be the scanning
area. To cancel a specified scanning area and
clear the frame, click anywhere outside the frame.
(2)
[Rotate] button
Click to rotate the preview image 90 degrees
clockwise. This allows the orientation to be
corrected without resetting the original. Upon
scanning, the image file is created in the
orientation shown in the preview window.
Click to rotate the preview image 90 degrees
clockwise. This allows the orientation to be
corrected without resetting the original. Upon
scanning, the image file is created in the
orientation shown in the preview window.
(3)
[Image Size] button
Click this button to open a dialog box that allows
you to specify the scanning area by entering
numbers. Pixels, mm, or inches can be selected
for the units of the numbers. By initially specifying
a scanning area, numbers can be entered to
change that area relative to the top left corner as
a fixed origin.
Click this button to open a dialog box that allows
you to specify the scanning area by entering
numbers. Pixels, mm, or inches can be selected
for the units of the numbers. By initially specifying
a scanning area, numbers can be entered to
change that area relative to the top left corner as
a fixed origin.
(4)
[Auto Scan Area Adjustment] button
([Auto Scan Area Judgement] in some
regions)
Click this button when the preview screen is
displayed to automatically set the scanning area
to the entire preview image.
([Auto Scan Area Judgement] in some
regions)
Click this button when the preview screen is
displayed to automatically set the scanning area
to the entire preview image.
Click the [Auto Scan
Area Adjustment] button
to automatically set the
scanning area to the
entire preview image.
Area Adjustment] button
to automatically set the
scanning area to the
entire preview image.
Preview image
Preview window
(5)
[Help] button
Click to display the help file for the scanner driver.
Click to display the help file for the scanner driver.
(1)
(2)
(3)
(4)
(5)
17
2
SCANNING FROM A WIA-COMPLIANT
APPLICATION (WINDOWS XP/Vista)
APPLICATION (WINDOWS XP/Vista)
If you are using Windows XP/Vista, you can use the WIA driver to scan from Paint and other WIA-compliant
applications. The procedure for scanning using Paint is explained in the following.
applications. The procedure for scanning using Paint is explained in the following.
1
Place the original(s) that you wish to
scan on the document glass or in the
SPF.
scan on the document glass or in the
SPF.
For information on placing an original for
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
2
Start Paint and then select [From
Scanner or Camera] from the [File]
menu.
Scanner or Camera] from the [File]
menu.
The scan screen of the WIA driver will appear.
3
Select the paper source and picture
type, and click the [Preview] button.
type, and click the [Preview] button.
• The preview image will appear.
• If you placed the original on the document
• If you placed the original on the document
glass, select [Flatbed] for the "Paper source".
• If you placed the original in the SPF, select
[Document Feeder] for the "Paper source" and
specify the original size in "Page size".
specify the original size in "Page size".
4
Click the [Scan] button.
• Scanning begins and the image is acquired into
Paint.
• Use [Save] in your application to select a file
name and folder for the scanned image, and
save the image.
save the image.
• To cancel scanning after the [Scan] button has
been clicked, click the [Cancel] button or press
the [C] key (
the [C] key (
) or [CA] key (
) on the
machine operation panel.
If you have WIA drivers for other devices
installed on your computer, the "Select
Device" screen will open. Select [SHARP
MX-xxxx] and click the [OK] button.
installed on your computer, the "Select
Device" screen will open. Select [SHARP
MX-xxxx] and click the [OK] button.
Note
• If an SPF is not installed on your machine,
the "Paper source" menu will not appear.
• If you select [Document Feeder] for the
"Paper source" and click the [Preview]
button, the top original in the SPF is
previewed. The previewed original is sent
to the original exit area, so you will need
to return it to the SPF before starting the
scanning job.
button, the top original in the SPF is
previewed. The previewed original is sent
to the original exit area, so you will need
to return it to the SPF before starting the
scanning job.
Note
18
SCANNING FROM THE "SCANNER AND
CAMERA WIZARD" (WINDOWS XP)
CAMERA WIZARD" (WINDOWS XP)
The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner
and Camera Wizard" lets you scan an image without using a TWAIN-compliant or WIA-compliant application.
and Camera Wizard" lets you scan an image without using a TWAIN-compliant or WIA-compliant application.
1
Place the original(s) that you wish to
scan on the document glass or in the
SPF.
scan on the document glass or in the
SPF.
For information on placing an original for
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
2
Click the [start] button, the [Control
Panel], [Printers and Other Hardware],
and then [Scanners and Cameras].
Panel], [Printers and Other Hardware],
and then [Scanners and Cameras].
3
Click the [SHARP MX-xxxx] icon and
then click [Get pictures] in [Imaging
Tasks].
then click [Get pictures] in [Imaging
Tasks].
The "Scanner and Camera Wizard" will appear.
4
Click the [Next] button.
5
Select the "Picture type" and "Paper
source", and click the [Next] button.
source", and click the [Next] button.
• If you placed the original on the document
glass, select [Flatbed] for the "Paper source".
• If you placed the original in the SPF, select
[Document Feeder] for the "Paper source" and
specify the original size in "Page size".
specify the original size in "Page size".
• You can click the [Preview] button to display the
preview image.
• If an SPF is not installed on your machine,
the "Paper source" menu will not appear.
• If you select [Document Feeder] for the
"Paper source" and click the [Preview]
button, the top original in the SPF is
previewed. The previewed original is sent
to the original exit area, so you will need
to return it to the SPF before starting the
scanning job.
button, the top original in the SPF is
previewed. The previewed original is sent
to the original exit area, so you will need
to return it to the SPF before starting the
scanning job.
• To adjust the resolution, picture type,
brightness and contrast settings, click the
[Custom settings] button.
[Custom settings] button.
Note
19
SCAN
2
6
Specify a group name, format and
folder for saving the image, and then
click the [Next] button.
folder for saving the image, and then
click the [Next] button.
JPG, BMP, TIF or PNG can be selected for the
format. To begin scanning, click the [Next] button.
format. To begin scanning, click the [Next] button.
7
When scanning ends, the following
screen will appear. Select the next
task you wish to perform and then
click the [Next] button.
screen will appear. Select the next
task you wish to perform and then
click the [Next] button.
If you are ready to end the session, click
[Nothing. I'm finished working with these
pictures].
[Nothing. I'm finished working with these
pictures].
8
Click the [Finish] button.
The "Scanner and Camera Wizard" closes and
the scanned image is saved in the specified
folder.
the scanned image is saved in the specified
folder.
Click on the first or last page to see other MX-M200D / MX-M200DK (serv.man8) service manuals if exist.