Sharp MX-FWX1 Service Manual ▷ View online
MX-7040N MX-TR14 (EXIT TRAY UNIT) 10 – 3
C. Right paper exit unit installation
1)
Fix the right paper exit unit with the screws (3 pcs.), and
arrange the wires.
arrange the wires.
2)
Fix the ADU right upper cabinets F/R with the screws (each 2
pcs.).
pcs.).
D. Right paper exit section and cabinet
installation
1)
Attach the right paper exit PG upper to the original positions.
2)
Attach the right paper exit section to the original positions.
Connect the harness.
Connect the harness.
3)
Attach the inner cover of the right door, the cabinet upper of
the right door and the front cabinet upper of the right door to
the original positions.
the right door and the front cabinet upper of the right door to
the original positions.
MX-7040N MX-TU14 (EXIT TRAY CABINET) 11 – 1
MX-7040N
Service Manual
[11] MX-TU14 (EXIT TRAY CABINET)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Paper exit tray attachment
1)
Fix the rear cover with the screws.
2)
Fix the front right cover with the screws.
Hook the front right cover.
3)
Fix the exit tray cabinet to the machine with the screw (Packed
items).
items).
Fit the rib part to the hole of the rear cover. .
B. Front cover attachment
1)
Attach the front cover, and fix it with the E-ring.
No.
Name
Quantity
1
Exit tray cabinet
1
2
Front cover
1
3
Paper holding arm
1
4
Full detection actuator
1
5
Screw
2
6
E-ring
1
7
Rear cover
1
8
Front right cover
1
1
1
1
1
1
MX-7040N MX-TU14 (EXIT TRAY CABINET) 11 – 2
C. Paper holding arm and full detection actuator
attachment
1)
Attach the paper holding arm and the full detection actuator.
MX-7040N MX-RB12 (PAPER PASS UNIT) 12 – 1
MX-7040N
Service Manual
[12] MX-RB12 (PAPER PASS UNIT)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Installation of the accuride rail
1)
Fix the L plate (Packed items No.5) to the main unit with the
screw (Packed items No.1).
screw (Packed items No.1).
2)
Install the front cover right (Packed items No.8), and fix the
screw (Packed items No.1).
screw (Packed items No.1).
3)
Install the paper guide (Packed items No.7), and fix the screw
(Packed items No.3).
(Packed items No.3).
No.
Name
Quantity
1
M4 x 7 round-head bind screw
13
2
M4 x 10 mold tap screw
2
3
M4 x 10 S-tight bind screw
1
4
E-ring
1
5
L plate
1
6
Accuride rail
1
7
Paper guide
1
8
Front cover right
1
9
Front cover
1
10
Left cabinet
1
11
Relay unit
1
12
Band
2
1
2
3
4
5
6
7
8
9
10
11
12
1
2
2
2
1
1
2
Click on the first or last page to see other MX-FWX1 service manuals if exist.