DOWNLOAD Sharp MX-FWX1 Service Manual ↓ Size: 43.31 MB | Pages: 127 in PDF or view online for FREE

MX-7040N  MX-RB12 (PAPER PASS UNIT)  12 – 2

4)

Engage the accuride rail (Packed items No.6) to cut-out por-
tion of main frame. 
Install the accuride rail while pressing so that engage the pro-
jection of the main unit frame with the hole in rear side of the
accuride rail. Fix the accuride rail with the screw (Packed items
No.1).

1)

Insert the rib of the left cabinet (Packed items No.10) into the
slit on the lower surface of the upper cabinet left. Fix the left
cabinet with the screw (Packed items No.1).

1)

Pull out the slide rails.

2)

Place the paper pass unit on the slide rails, and fix it with the
screw (Packed items No.1). 
Push the paper pass unit into the main unit to install.

3)

Insert the front cover (Packed items No.9) to the supporting
point, and fix it with a E-ring (Packed items No.4).

4)

Install the band (Packed items No.12), and fix the screw
(Packed items No.2) to the front cover.

MX-7040N  MX-RB12 (PAPER PASS UNIT)  12 – 3

1)

Install the toner bottle, and close the front cover.

MX-7040N  MX-FN19 (FINISHER (50 sheets binding))  13 – 1

 

MX-7040N

Service Manual

 

Since the illustrations of the former models are used, they may differ from the actual cases.

NOTE: For removal of the finisher, manpower of two persons or

more is required.

1)

Remove the fixing material, and remove the top case.

2)

Remove the bundled items from packing cushion.

3)

Holding the upper part of the saddle stitch finisher by two peo-
ple, pull up the saddle stitch finisher, and make it stand upright.
(Be careful to sliding worker's foot.)

4)

Remove the skid and packing cushions.

5)

One person tilt the finisher, another person remove the lower
tray.

6)

Remove the other side similarly.

MX-7040N  MX-FN19 (FINISHER (50 sheets binding))  13 – 2

1)

Remove the fixing tapes and protection material.

2)

Open the front upper door, and remove the fixing tapes and
protection material.

3)

Remove the screws and remove the fixing material for the
paper exit tray. (four positions)

1

Binding head round tapping M4 x 8

2

2

IT tapping M4 x 20

2

3

Binding head M4 x 12

4

4

Step screw

2

5

Rail

1

6

Rail reception sheet metal

1

7

Connection fixture F (for x3)

1

8

Connection fixture R (for x3)

1

9

Staple position label (For scanner)

1

10

Staple position label (For DSPF)

1

11

Punch position label (For scanner)

1

12

Punch position label (For DSPF)

1

13

Cushion (S)

1

14

Cushion (M)

1

15

Cushion (L)

1

1

2

3

6

4

5

7

8

9

11

12

10

13

15

14

X3

X3