DOWNLOAD Sharp MX-FWX1 Service Manual ↓ Size: 43.31 MB | Pages: 127 in PDF or view online for FREE

MX-7040N  MX-MF11 (MULTI BYPASS TRAY)  9 – 2

2)

Fix the bracket with the screw.

3)

Remove the multi bypass tray from the package.

NOTE: Use man power of two persons to lift the multi bypass

tray. (Refer to the figure below.)

1)

Remove the screws and remove the upper cabinet.
MEMO: Remove the paper feed section with shifting it to the
direction of the arrow.

2)

Mount the multi bypass tray on LCT and fix it with screws.

NOTE: Insert the connection pin to the positioning hole of the

multi bypass tray.

3)

Connect the harnesses to LCT.
MEMO: Wire the harnesses through the cable clamp.

Screw hole

Screw hole

Connection pin

Connection pin

MX-7040N  MX-MF11 (MULTI BYPASS TRAY)  9 – 3

4)

Fix the upper cabinet with the screws.
MEMO: After fixing the cabinet, shift the paper feed section to
the direction of the arrow.

5)

Open the front door of the LCT, and store the tab sheet
restraint plate to the place as shown in the figure below.

MX-7040N  MX-TR14 (EXIT TRAY UNIT)  10 – 1

MX-7040N

Service Manual

 

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1)

Remove the screws (3 pcs.) and remove the front cabinet
upper of the right door.

2)

Remove the screws (2 pcs.) and remove the cabinet upper of
the right door.

3)

Remove the screw (1 pc.), and remove the inner cover of the
right door.

1

Right paper exit unit

1

2

ADU right upper cabinet R

1

3

ADU right upper cabinet F

1

MX-7040N  MX-TR14 (EXIT TRAY UNIT)  10 – 2

4)

Remove the screws (6 pcs.).
(1) Step screw, (2) P tight, (3) S tight

5)

Remove the right paper exit section.

1)

Remove the screws (4 pcs.), and remove the right paper exit
PG upper.

NOTE: When removing, be careful of the pawls.

2)

Remove the screws (7 pcs.) and remove the right paper exit
unit dummy.

Ԙ

ԙ

Ԛ

Pawls