DOWNLOAD Sharp MX-FWX1 Service Manual ↓ Size: 43.31 MB | Pages: 127 in PDF or view online for FREE

MX-7040N  MX-FN19 (FINISHER (50 sheets binding))  13 – 7

14) Tighten the caster fixing screws so that the indicator scale is

fit.

15) Install the rear lower cover with the fixing screws.

16) Install the auxiliary wheels with the fixing screws.

17) Install the spanner for adjustment to inside the front lower door.

18) Close the front lower cover, and secure it with the fixing

screws.

19) Attach the front upper cover.

20) Close the front upper cover.

MX-7040N  MX-FN19 (FINISHER (50 sheets binding))  13 – 8

21) Attach the front lower cover with the fixing screw.

1)

Engage the finisher to the main unit.

2)

Open the front cover of finisher.

3)

Fix the finisher to the main unit with the step screw (Packed
items No.4).

4)

Close the front cover.

5)

Remove the screw, and remove the connector cover on rear
side of the finisher.

6)

Install the step screw (Packed items No.4).

7)

Attach the connector cover on rear side of the finisher.

1)

Connect two connectors of the finisher to the main unit, and
tighten the screws.

MX-7040N  MX-FN19 (FINISHER (50 sheets binding))  13 – 9

1)

Attach the staple position label (Packed items No.11, 12) to the
position indicated in the figure.
For scanner

1)

Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.

Cleaning of the document scan section

CAUTION

When streaks appear on copy or scan

images, open the automatic document

feed unit and clean the document scan

section with the glass cleaner (accessory).

MX-7040N  MX-FN20 (SADDLE STITCH FINISHER (50 sheets binding))  14 – 1

MX-7040N

Service Manual

 

Since the illustrations of the former models are used, they may differ from the actual cases.

NOTE: For removal of the saddle stitch finisher, manpower of two

persons or more is required.

1)

Remove the fixing material, and remove the top case.

2)

Remove the bundled items from packing cushion.

3)

Holding the upper part of the saddle stitch finisher by two peo-
ple, pull up the saddle stitch finisher, and make it stand upright.
(Be careful to sliding worker's foot. )

4)

Remove the skid and packing cushions.

5)

One person tilt the saddle stitch finisher, another person
remove the lower tray.

6)

Remove the other side similarly.