Sharp MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man6) Service Manual ▷ View online
MX-C250 SIMULATION 6 – 19
26
26-6
Purpose
:
Setting
Function (Purpose)
Used to set the specifications (paper, fixed
magnification ratio, etc.) of the destination.
magnification ratio, etc.) of the destination.
Section
Operation/Procedure
1) Select an item to be set with 10 keys.
2) Press [OK]/[START] key.
The selected set content is saved.
26-18
Purpose
:
Setting
Function (Purpose)
Used to set Disable/Enable of the toner
save mode operation.
(For the Japan and the UK versions.)
save mode operation.
(For the Japan and the UK versions.)
Section
Operation/Procedure
1) Select an item to be set with 10 keys.
2) Press [OK]/[START] key.
The selected set content is saved.
K
TN_EMP_W
The threshold of toner empty (Over
W count detection counts continu-
ously)
W count detection counts continu-
ously)
0
255
TN_EMP_X
The threshold of toner empty (Over
X count detection counts continu-
ously)
X count detection counts continu-
ously)
0
255
TN_EMP_Y
The threshold of toner empty (Over
Y count detection counts continu-
ously)
Y count detection counts continu-
ously)
0
255
C
TCS_B_AVE
.
.
Toner sensor output block average
value
value
0
255
TSG_HUM
Current TSG environment correction
value (middle speed)
value (middle speed)
-127
127
TSG_COV
Current TSG print rate correction
value (middle speed)
value (middle speed)
-127
127
TSG_LIFE
Current TSG developer life correc-
tion value (middle speed)
tion value (middle speed)
-127
127
TSG_ENV
Current TSG cumulative drive area
correction value (middle speed)
correction value (middle speed)
-127
127
DELTA_TSG
Average coverage area
-254
254
DELTA_TSG
Operation voltage correction value
1
255
TSG_TOTA
L
L
Operation voltage target value (Mid-
dle speed)
dle speed)
0
255
TCS_AVE.
Toner sensor output average value
0
255
TN_EMP_W
The threshold of toner empty (Over
W count detection counts continu-
ously)
W count detection counts continu-
ously)
0
255
TN_EMP_X
The threshold of toner empty (Over
X count detection counts continu-
ously)
X count detection counts continu-
ously)
0
255
TN_EMP_Y
The threshold of toner empty (Over
Y count detection counts continu-
ously)
Y count detection counts continu-
ously)
0
255
M
TCS_B_AVE
.
.
Toner sensor output block average
value
value
0
255
TSG_HUM
Current TSG environment correction
value (middle speed)
value (middle speed)
-127
127
TSG_COV
Current TSG print rate correction
value (middle speed)
value (middle speed)
-127
127
TSG_LIFE
Current TSG developer life correc-
tion value (middle speed)
tion value (middle speed)
-127
127
TSG_ENV
Current TSG cumulative drive area
correction value (middle speed)
correction value (middle speed)
-127
127
DELTA_TSG
Average coverage area
-254
254
DELTA_TSG
Operation voltage correction value
1
255
TSG_TOTA
L
L
Operation voltage target value (Mid-
dle speed)
dle speed)
0
255
TCS_AVE.
Toner sensor output average value
0
255
TN_EMP_W
The threshold of toner empty (Over
W count detection counts continu-
ously)
W count detection counts continu-
ously)
0
255
TN_EMP_X
The threshold of toner empty (Over
X count detection counts continu-
ously)
X count detection counts continu-
ously)
0
255
TN_EMP_Y
The threshold of toner empty (Over
Y count detection counts continu-
ously)
Y count detection counts continu-
ously)
0
255
Y
TCS_B_AVE
.
.
Toner sensor output block average
value
value
0
255
TSG_HUM
Current TSG environment correction
value (middle speed)
value (middle speed)
-127
127
TSG_COV
Current TSG print rate correction
value (middle speed)
value (middle speed)
-127
127
TSG_LIFE
Current TSG developer life correc-
tion value (middle speed)
tion value (middle speed)
-127
127
TSG_ENV
Current TSG cumulative drive area
correction value (middle speed)
correction value (middle speed)
-127
127
DELTA_TSG
Average coverage area
-254
254
DELTA_TSG
Operation voltage correction value
1
255
TSG_TOTA
L
L
Operation voltage target value (Mid-
dle speed)
dle speed)
0
255
TCS_AVE.
Toner sensor output average value
0
255
TN_EMP_W
The threshold of toner empty (Over
W count detection counts continu-
ously)
W count detection counts continu-
ously)
0
255
TN_EMP_X
The threshold of toner empty (Over
X count detection counts continu-
ously)
X count detection counts continu-
ously)
0
255
TN_EMP_Y
The threshold of toner empty (Over
Y count detection counts continu-
ously)
Y count detection counts continu-
ously)
0
255
Item
Display
Contents
1
U.S.A.
United States of America
2
CANADA
Canada
3
INCH
Inch series, other destinations
4
JAPAN
Japan
5
AB_B
AB series (B5 detection), other destinations
6
EUROPE
Europe
7
U.K.
United Kingdom
8
AUS.
Australia
9
AB_A
AB series (A5 detection), other destinations
10
CHINA
China
Item
Display
Content
Default
value
1
COPY
0
Copy toner save mode is inhibited.
0
1
Copy toner save mode is allowed
2
PRINT
0
Printer toner save mode is inhib-
ited.
ited.
0
1
Printer toner save mode is
allowed.
allowed.
MX-C250 SIMULATION 6 – 20
26-30
Purpose
:
Setting
Function (Purpose)
Used to set the operation mode corre-
sponding to the CE mark (Europe safety
standards). (For slow start to drive the fus-
ing heater lamp)
sponding to the CE mark (Europe safety
standards). (For slow start to drive the fus-
ing heater lamp)
Section
Operation/Procedure
1) Enter the set value with 10 keys.
2) Press [OK] /[START] key.
The set value in step 1) is saved.
* Even in Enable state, the control may not be executed due to
the power frequency, etc.
26-35
Purpose
:
Setting
Function (Purpose)
Used to set the display mode of SIM 22-4
trouble history when a same trouble
occurred repeatedly. There are two display
modes: display as one trouble and display
as several series of troubles.
trouble history when a same trouble
occurred repeatedly. There are two display
modes: display as one trouble and display
as several series of troubles.
Section
Operation/Procedure
1) Enter the set value with 10 keys.
1) Press [OK]/[START] key.
The selected set content is saved.
26-38
Purpose
:
Setting
Function (Purpose)
Used to set Continue/Stop of print when the
maintenance life is reached.
maintenance life is reached.
Section
Operation/Procedure
1) Enter the set value with 10 keys.
2) Press [OK]/[START] key.
The selected set content is saved.
26-53
Purpose
:
Setting
Function (Purpose)
User auto color calibration (color balance
adjustment) Inhibit/Allow setting
(copy mode)
adjustment) Inhibit/Allow setting
(copy mode)
Section
Operation/Procedure
1) Enter the set value with 10 keys.
1) Press [OK]/[START] key.
The selected set content is saved.
Item
Display
Content
Range
1
(0:YES, 1:NO)
1
Control allowed
0 - 1
0
Control inhibited
U.S.A
1 (CE not supported)
EUROPE
0 (CE supported)
CANADA
1 (CE not supported)
U.K.
0 (CE supported)
INCH
1 (CE not supported)
AUS.
0 (CE supported)
JAPAN
1 (CE not supported)
AB_A
0 (CE supported)
AB_B
1 (CE not supported)
CHINA
0 (CE supported)
Item
Display
Contents
Range
1
TROUBLE
MEMORY
MODE
MEMORY
MODE
0
Only once display. If the trouble is
the same as the current one, the
trouble is not saved.
the same as the current one, the
trouble is not saved.
0 - 1
1
Anytime display. Even if the trouble
is the same as the current one, the
trouble is saved.
is the same as the current one, the
trouble is saved.
Item
Display
Content
Setting
range
1
M LIFE OVER
(0: CONTINUE
1: STOP)
(0: CONTINUE
1: STOP)
0
Print Enable/Disable setting
when the maintenance timing is
over (Print Continue)
when the maintenance timing is
over (Print Continue)
0
1
Print Enable/Disable setting
when the maintenance timing is
over (Print Stop)
when the maintenance timing is
over (Print Stop)
Item
Display
Contents
Range
1
ACC
1
ACC is allowed.
0 - 1
0
ACC is permitted.
MX-C250 SIMULATION 6 – 21
26-54
Purpose :
Setting
Function (Purpose)
Used to set LCD contrast PWM duty
Section
Operation/Procedure
1) Enter the set value with 10 keys.
1) Press [OK]/[START] key.
The selected set content is saved.
26-69
Purpose :
Setting
Function (Purpose)
Used to set the operating conditions for
toner near end.
toner near end.
Section
Operation/Procedure
1) Select the item to be set with Arrow keys.
2) Enter the set value with 10 keys.
3) Press [OK]/[START] key.
The selected set content is saved.
<List of Default values and set values for each destination>
26-73
Purpose :
Setting
Function (Purpose)
Used to set Toner save setting. .
Section
Operation/Procedure
1) Enter the set value with 10 keys.
2) Press [OK]/[START] key.
The selected set content is saved.
27
27-2
Purpose :
Setting
Function (Purpose)
Used to set the sender's registration num-
ber and the HOST server telephone num-
ber. (FSS function)
ber and the HOST server telephone num-
ber. (FSS function)
Section
Operation/Procedure
1) Select an item to be set with 10 keys. ]
2) Press [OK]/[START] key.
<List of Default values and set values for each destination>
Item
Display
Contents
Setting range
1
LCD PWM duty
PWM duty value
30 - 70
Item
Display
Content
Range
Default
value
A
TN PREP
0:Y 1:N
0:Y 1:N
The toner preparation message is
displayed/ is not displayed. (0:Y
1:N)
displayed/ is not displayed. (0:Y
1:N)
0-1
Refer to
the desti-
nation
list
B
REM TN
LV
LV
Toner preparation indication at the
toner rest amount x%.(From 0.5%
to 9.50%, it is possible to set
in0.5%)
toner rest amount x%.(From 0.5%
to 9.50%, it is possible to set
in0.5%)
0-9
4
C
TN N END
0:Y 1:N
0:Y 1:N
The toner near end message is dis-
played is not displayed.(0:Y 1:N)
played is not displayed.(0:Y 1:N)
0-1
Refer to
the desti-
nation
list
D
TN END
Operation Enable / Disable in
TONER END
TONER END
1 - 3
Refer to
the desti-
nation
list
E
TN END
CNT
CNT
Setting of the number of copy/print/
FAX outputs Enable after TONER
NEAR END.
FAX outputs Enable after TONER
NEAR END.
1 - 3
1
F
TN E-MAIL
ALERT
ALERT
When near near toner end of Toner
Low status of E-mail alert system is
sent. (0 : near near end / 1 : near
end)
Low status of E-mail alert system is
sent. (0 : near near end / 1 : near
end)
1
1
Destination
Set value
Toner prepara-
tion
Toner near end
Toner end
U.S.A
0 (Displayed)
0 (Displayed)
2
CANADA
0 (Displayed)
0 (Displayed)
2
INCH
0 (Displayed)
0 (Displayed)
2
JAPAN
0 (Displayed)
1 (Not Displayed)
2
AB_B
0 (Displayed)
0 (Displayed)
2
EUROPE
0 (Displayed)
0 (Displayed)
2
U.K.
0 (Displayed)
0 (Displayed)
2
AUS.
0 (Displayed)
0 (Displayed)
2
AB_A
0 (Displayed)
0 (Displayed)
2
CHINA
0 (Displayed)
0 (Displayed)
1
Item/Display
Content
TONER SAVE DISP
Toner save setting is displayed (0) / is not dis-
played (1)
played (1)
USER
FAX_NO.
FAX_NO.
Sender registration number (Max. 16 digits)
SRV TEL_NO.
Host server telephone number (Max. 16 digits)
-
-
Refer to the destination list
Destination
Set value
U.S.A
16 figure ALL”(NULL)”
CANADA
16 figure ALL”(NULL)”
INCH
16 figure ALL”(NULL)”
JAPAN
”0120382327”
AB_B
16 figure ALL”(NULL)”
EUROPE
16 figure ALL”(NULL)”
U.K.
16 figure ALL”(NULL)”
AUS.
16 figure ALL”(NULL)”
AB_A
16 figure ALL”(NULL)”
CHINA
16 figure ALL”(NULL)”
6
6
‘14/Jul
7
‘16/May
7
MX-C250 SIMULATION 6 – 22
27-4
Purpose
Setting
Function (Purpose)
Used to set the initial call and toner order
auto send. (FSS function)
auto send. (FSS function)
Section
Operation/Procedure
1)
1)
Select an item to be set with Arrow keys.
2)
Enter the set value with 10 keys.
3)
Press [OK]/[START] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
Item/Display
Content
Setting
range
Default value
Remarks
1
RETRY_BUSY
Resend number setting when busy
0 - 15
2
* 0: No retry
2
TIMER (MINUTE) _BUSY
Resend timer setting (minute) when busy
1 - 15
3
3
RETRY_ERROR
Resend number setting when error
0 - 15
1
* 0: No retry
4
TIMER (MINUTE) _ERROR
Resend timer setting (minute) when error
1 - 15
1
5
FAX_RETRY
Fax initial connection retry frequency setting
0 - 15
2
6
TONER ORDER
TIMING (K)
TIMING (K)
EMPTY
Toner order auto send
timing setting (K)
timing setting (K)
EMPTY
0 - 11
0
6 (25%)
TONER NEAR
END
END
TONER NEAR
END
END
1
5%
5%
2
10%
10%
3
15%
15%
4
20%
20%
5
25%
25%
6
30%
30%
7
35%
35%
8
40%
40%
9
45%
45%
10
50%
50%
11
7
TONER ORDER
TIMING (C)
TIMING (C)
EMPTY
Toner order auto send
timing setting (C)
timing setting (C)
EMPTY
0 - 11
0
3(49% - 25%)
TONER NEAR
END
END
TONER NEAR
END
END
1
5%
5%
2
10%
10%
3
15%
15%
4
20%
20%
5
25%
25%
6
30%
30%
7
35%
35%
8
40%
40%
9
45%
45%
10
50%
50%
11
8
TONER ORDER
TIMING (M)
TIMING (M)
EMPTY
Toner order auto send
timing setting (M)
timing setting (M)
EMPTY
0 - 11
0
6 (25%)
TONER NEAR
END
END
TONER NEAR
END
END
1
5%
5%
2
10%
10%
3
15%
15%
4
20%
20%
5
25%
25%
6
30%
30%
7
35%
35%
8
40%
40%
9
45%
45%
10
50%
50%
11
9
TONER ORDER
TIMING (Y)
TIMING (Y)
EMPTY
Toner order auto send
timing setting (Y)
timing setting (Y)
EMPTY
0 - 11
0
6 (25%)
TONER NEAR
END
END
TONER NEAR
END
END
1
5%
5%
2
10%
10%
3
15%
15%
4
20%
20%
5
25%
25%
6
30%
30%
7
35%
35%
8
40%
40%
9
45%
45%
10
50%
50%
11
10
TONER ORDER
CONTROL
CONTROL
Setting of toner order timing control
0 - 1
0
0: Toner order is sent by fixed
remained amount
1: Toner order is sent by the result
of toner consumption calculation
remained amount
1: Toner order is sent by the result
of toner consumption calculation
11
TONER DELIVERY
CONTROL
CONTROL
Setting of toner comprehensive transport
0 - 1
0
0: Comprehensive transport off
1: Comprehensive transport on
1: Comprehensive transport on
Click on the first or last page to see other MX-C250 / MX-C250E / MX-C250F / MX-C250FE / MX-C250FR / MX-C300F / MX-C300W / MX-C300WE / MX-C300A / MX-C300WR (serv.man6) service manuals if exist.