Sharp MX-BMX1 (serv.man3) Service Manual ▷ View online
BF-3-17
Replacement
Adjustment
20 October 2010
SENSORS AND SWITCHES
Removal
1. Tilt machine (
1. Tilt machine (
3.1.6).
2. Disconnect connector [A] (
x 1).
3. Remove screws [B] ( x 2).
3. Loosen screw [C] ( x 1).
4. Remove screw [D] and sensor [E].
3. Loosen screw [C] ( x 1).
4. Remove screw [D] and sensor [E].
3.3 SENSORS AND SWITCHES
3.3.1 STOP GATE SENSOR (Q1)
[C]
[A]
[B]
[B]
[D]
[E]
Front view,
machine tilted
BF-3-18
20 October 2010
SENSORS AND SWITCHES
3.3.2 ROLLER MOTOR FRONT / REAR SENSORS (Q2 AND Q3)
Removal
1. Remove Outfeed Cover (
1. Remove Outfeed Cover (
3.1.4).
2. Move Roller Motor assembly towards center of the clamps.
3. Disconnect connector [A] (
3. Disconnect connector [A] (
x 1).
4. Remove screw [B] ( x 1).
Sensor Q3
Sensor Q2
[A]
[B]
[A]
[B]
BF-3-19
Replacement
Adjustment
20 October 2010
SENSORS AND SWITCHES
3.3.3 CLAMP MOTOR HOME POSITON SENSOR (Q4)
Removal
1. Remove Outfeed Cover (
1. Remove Outfeed Cover (
3.1.4).
2. Disconnect connector [A] (
x1 ).
3. Remove screw [B] ( x1).
[A]
[B]
BF-3-20
20 October 2010
SENSORS AND SWITCHES
3.3.4 INFEED / OUTFEED SENSORS (Q5 AND Q7)
Removal Q5, LED
1. Open Top Cover.
2. Disconnect connector [A] (
1. Open Top Cover.
2. Disconnect connector [A] (
x 1).
3. Remove nut [B] ( x 1).
4. Remove LED [C].
4. Remove LED [C].
Removal Q5, phototransistor
1. Tilt machine (
1. Tilt machine (
3.1.6).
2. Disconnect connector [D] (
x 1).
3. Remove nut [E] ( x 1).
4. Remove Phototransistor [F].
4. Remove Phototransistor [F].
Phototransistor
LED
White
Red
Infeed Sensor Q5)
[C]
[A]
[B]
[B]
[D]
[F]
[E]
[E]
Click on the first or last page to see other MX-BMX1 (serv.man3) service manuals if exist.