Sharp MX-BMX1 (serv.man3) Service Manual ▷ View online
BF-3-29
Replacement
Adjustment
20 October 2010
BELTS
8. Cut cable ties [H] ( x 5).
[H]
Bottom view
[ I ]
[ I ]
[J]
9. Disconnect connectors Q5, Q6, Q7, P20 and P21 [ I ] (
x 5).
10. Remove connectors J20 and J21 [J] from machine frame (
x 2).
Bottom view
BF-3-30
20 October 2010
BELTS
13. Remove shafts [K] ( x 2).
14. Remove nuts [L] holding the Sliding plate [M] ( x 4).
15. Gently lift the Sliding plate.
16. Gently slide off the belts [N] to rear-side.
14. Remove nuts [L] holding the Sliding plate [M] ( x 4).
15. Gently lift the Sliding plate.
16. Gently slide off the belts [N] to rear-side.
[K]
[L]
[M]
[N]
Bottom view
BF-3-31
Replacement
Adjustment
20 October 2010
BELTS
3.4.3 TEFLON TAPE LOWER TRANSPORT BELT
Removal
1. Open the Top cover.
2. Lift the upper Feed belt assembly.
3. Lift the lower Feed belt and remove Teflon tape.
1. Open the Top cover.
2. Lift the upper Feed belt assembly.
3. Lift the lower Feed belt and remove Teflon tape.
Replacement
1. Mount the new teflon tape straps between the cut-outs for the rollers and on
1. Mount the new teflon tape straps between the cut-outs for the rollers and on
each side of the cut-outs for the cable ties.
Page intentionally blank
Click on the first or last page to see other MX-BMX1 (serv.man3) service manuals if exist.