Sharp MX-B381 / MX-B401 (serv.man7) Service Manual ▷ View online
MX-B381/B401 SIMULATION 5 – 48
44-9
Purpose
Operation data display
Function (Purpose) Used to display the result data of the high
density process control operation.
Section
Image process (Photo-conductor/
Developing/Transfer/Cleaning)
Developing/Transfer/Cleaning)
Operation/Procedure
1)
1)
Select a target display mode.
(*1) Differs depending on the destination.
(*2) Value on the left: Voltage level after correction Value on the right: Base voltage level
(*2) Value on the left: Voltage level after correction Value on the right: Base voltage level
Mode
Item/Display (*: Correction value)
Content
Display
range
Default
value
CPY/PRN
(*2)
P (PROCON)
BLACK : GB ***/*** DV ***/***
High density process control GB/DV data
(Actual output voltage level/base voltage level)
(Actual output voltage level/base voltage level)
GB: 150 - 850
DV: 100 - 600
DV: 100 - 600
GB: 630
DV: 430
DV: 430
N(M)
(NORMAL (MIDDLE))
BLACK : GB ***/*** DV ***/***
High density normal (Medium speed display)
GB/DV data
(Actual output voltage level/base voltage level)
GB/DV data
(Actual output voltage level/base voltage level)
GB: 150 - 850
DV: 100 - 600
DV: 100 - 600
GB: 630
DV: 430
DV: 430
N(L)
(NORMAL (LOW))
BLACK : GB ***/*** DV ***/***
High density normal (Low speed display)
GB/DV data
(Actual output voltage level/base voltage level)
GB/DV data
(Actual output voltage level/base voltage level)
GB: 150 - 850
DV: 100 - 600
DV: 100 - 600
GB: 600
DV: 400
DV: 400
OTHER
TN/TC
TN HUD AREA
Toner control display humidity area
1 - 14
9
TN HUD DATA
Toner control display humidity AD value
0 - 1023
0
TC TMP AREA
Transfer display temperature area
1 - 9
4
TC TMP DATA
Transfer display temperature AD value
0 - 1023
0
TC HUD AREA
Transfer display humidity area
1 - 9
4
TC HUD DATA
Transfer display humidity AD value
0 - 1023
0
MD HUD AREA
Membrane decrease display humidity area
1 - 14
9
MD HUD DATA
Membrane decrease display humidity AD value
0 - 1023
0
DRUM
MD K STEP
Drum membrane decrease correction STEP
display
display
0 - 4
0
MD K DRUM COUNTER
Membrane decrease drum traveling distance
area
area
0 - 20
0
VG
MD K REVISE(VG) : L *** M ***
Drum membrane decrease grid voltage
correction display
correction display
0 - 255
0
LD
MD K REVISE(LD) : L *** M ***
Drum membrane decrease laser power voltage
correction
correction
0 - 255
0
HV
MD K REVISE(HV) : L *** M ***
High density membrane decrease environment
GB correction display
GB correction display
0 - 255
0
CP
MD K REVISE(CP) : L *** M ***
Drum membrane decrease environment grid
voltage correction display
voltage correction display
0 - 255
0
DL
MD K REVISE COL (DL): L *** M ***
Drum membrane decrease discharge light
quantity correction (%)
quantity correction (%)
0 - 100
50
DL EV
MD K REVISE COL (DL EV): L *** M ***
Drum membrane decrease environment
discharge light quantity correction (%)
discharge light quantity correction (%)
-100 - 100
0
CRUM
DESTINATION
Machine side management CRUM destination
(Main unit data)
(Main unit data)
-
CRUM
information
(*1)
MODEL TYPE
Machine model type
0 - 1
0
CRUM DEST_K
CRUM destination (CRUM data)
-
CRUM
information
(*1)
OTHER
CNT
PROCON COUNT HV
High density process control number of
executions
executions
0 - 99999999
0
PROCON COUNT HT
Half tone process control number of executions
0 - 99999999
0
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
352&21'$7$',63352&211250$/01250$//
%/$&.B3*%B'9B
%/$&.B0*%B'9B%/$&.B/*%B'9B
27+(5
&3<351
MX-B381/B401 SIMULATION 5 – 49
44-12
Purpose
Operation data display
Function (Purpose) Used to display the operation data of the
high density process control and the image
density sensor (registration sensor).
density sensor (registration sensor).
Section
Image process (Photo-conductor/
Developing)
Developing)
Operation/Procedure
1)
1)
Select a display mode.
44-14
Purpose
Operation data display
Function (Purpose) Used to display the output level of the tem-
perature and humidity sensor.
Section
Process (OPC drum, development)/Fusing/
LSU
LSU
Operation/Procedure
The output levels of the fusing temperature sensor, the machine
temperature sensor, and the humidity sensor are displayed.
The output levels of the fusing temperature sensor, the machine
temperature sensor, and the humidity sensor are displayed.
44-16
Purpose
Operation data display
Function (Purpose) Used to display the toner density control
data.
Section
Developing system
Operation/Procedure
1)
1)
The toner density control data are displayed.
Select the display category with [NEXT] key.
Select the display category with [NEXT] key.
Mode
Item/Display
Content
Display
range
Default
value
TARGET
(1 page)
ADK_SL (K)
Development
characteristics
gradient coefficient
(High density process
control operation)
characteristics
gradient coefficient
(High density process
control operation)
-9.99 -
9.99
0.00
ADK_INT(K)
Development
characteristics
intercept level (High
density process
control operation 0V)
characteristics
intercept level (High
density process
control operation 0V)
-999.9 -
999.9
0.0
TARGET (K)
High density process
control target density
level
control target density
level
0.00 -
255.00
0.00
PATCH
1-5
(Page 1-2)
n-1
High density process
control nth time patch
density level 1 (n=1-
5)
control nth time patch
density level 1 (n=1-
5)
0 - 255
0
n-2
Patch data nth time
patch 2 (n=1-5)
patch 2 (n=1-5)
0 - 255
0
n-3
Patch data nth time
patch 3 (n=1-5)
patch 3 (n=1-5)
0 - 255
0
n-4
Patch data nth time
patch 4 (n=1-5)
• BK only
patch 4 (n=1-5)
• BK only
0 - 255
0
n-5
Patch data nth time
patch 5 (n=1-5)
• BK only
patch 5 (n=1-5)
• BK only
0 - 255
0
PATCH
6-10
(Page 1-2)
n-1
Patch data nth time
patch 1 (n=6-10)
patch 1 (n=6-10)
0 - 255
0
n-2
Patch data nth time
patch 2 (n=6-10)
patch 2 (n=6-10)
0 - 255
0
n-3
Patch data nth time
patch 3 (n=6-10)
patch 3 (n=6-10)
0 - 255
0
n-4
Patch data nth time
patch 4 (n=6-10)
• BK only
patch 4 (n=6-10)
• BK only
0 - 255
0
n-5
Patch data nth time
patch 5 (n=6-10)
• BK only
patch 5 (n=6-10)
• BK only
0 - 255
0
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
3$7&+7$5*(7'$7$',63/$<
3$7&+
$'.B6/.
$'.B,17.
7$5*(7.
3$7&+
7$5*(7
Item/Display
Content
Display range
TH_UM
Fusing upper heat roller
thermistor (center section)
detection temperature (
thermistor (center section)
detection temperature (
C),
differential input AD value
Temperature:
0 - 255
C (1C)
AD value: 0 - 1023
TH_UM_AD1
Fusing upper heat roller
thermistor compensation
sensor (center section)
detection temperature (
thermistor compensation
sensor (center section)
detection temperature (
C),
AD value
Temperature:
0.0 - 255.0
C (0.2C)
AD value: 0 - 1023
TH_UM_AD2
Fusing upper heat roller
thermistor detection sensor
(center section) AD value
thermistor detection sensor
(center section) AD value
AD value: 0 - 1023
TH_LM
Fusing lower heat roller
thermistor (side section) A/D
value, temperature (
thermistor (side section) A/D
value, temperature (
C)
Temperature:
0 - 255
C (1C)
AD value: 0 - 1023
TH_EX1
Fusing external heat roller
thermistor (center section) A/D
value, temperature (
thermistor (center section) A/D
value, temperature (
C)
Temperature:
0 - 255
C (1C)
AD value: 0 - 1023
TH_EX2
Fusing external heat roller
thermistor (side section) A/D
value, temperature (
thermistor (side section) A/D
value, temperature (
C)
Temperature:
0 - 255
C (1C)
AD value: 0 - 1023
TH_M
Temperature sensor A/D
value, temperature (
value, temperature (
C)
Temperature:
-40.0
C - 60.0 (1C)
AD value: 0 - 1023
HUD_M
Temperature sensor A/D
value, humidity (%)
value, humidity (%)
Humidity:
5.0 - 90.0% (
0.1%)
AD value: 0 - 255
TH1_LSU
LSU thermistor 1 A/D value,
temperature (
temperature (
C)
Temperature:
5.0 - 60.0
C (0.1C)
AD value: 0 - 255
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6(1625'$7$',63/$<021,725
7+B80GHJ;;;
7+B80B$'GHJ;;;
7+B80B$';;;
7+B/0GHJ;;;
7+B(;GHJ;;;
7+B(;GHJ;;;
7+B0GHJ;;;
+8'B0;;;
7+B/68GHJ;;
MX-B381/B401 SIMULATION 5 – 50
Item/
Display
Content
Setting
range
Default
value
TONER
DEN_LT (M)
DEN_LT (M)
The current toner density sensor
output value (final value) at the
medium speed
output value (final value) at the
medium speed
1 - 255
129
TONER
DEN_ST (M)
DEN_ST (M)
The current toner density reference
value display (including all the
correction values) at the medium
speed
value display (including all the
correction values) at the medium
speed
128
TONER
DEN_LT (L)
DEN_LT (L)
The current toner density sensor
output value (final value) at the low
speed
output value (final value) at the low
speed
129
TONER
DEN_ST (L)
DEN_ST (L)
The current toner density reference
value display (including all the
correction values) at the low speed
value display (including all the
correction values) at the low speed
128
Item/Display
Content
Setting
range
Default
value
AUTO DEVE
(M)
(M)
Auto
development
adjustment
value
(At the
medium
speed)
development
adjustment
value
(At the
medium
speed)
Sensor output value
after completion of
SIM25-02
(at the medium
speed)
after completion of
SIM25-02
(at the medium
speed)
1 - 255
128
ALL (M)
All the
correction
reference
values
(At the
medium
speed)
correction
reference
values
(At the
medium
speed)
Correction reference
value which
calculated all the
correction values for
the auto
development
adjustment value
(at the medium
speed)
value which
calculated all the
correction values for
the auto
development
adjustment value
(at the medium
speed)
AUTO DEVE
(L)
(L)
Auto
development
adjustment
value
(At the low
speed)
development
adjustment
value
(At the low
speed)
Sensor output value
after completion of
SIM25-02
(at the low speed)
after completion of
SIM25-02
(at the low speed)
ALL (L)
All the
correction
reference
values
(At the low
speed)
correction
reference
values
(At the low
speed)
Correction reference
value which
calculated all the
correction values for
the auto
development
adjustment value
(at the low speed)
value which
calculated all the
correction values for
the auto
development
adjustment value
(at the low speed)
AREA
Area
correction
value
correction
value
Correction value for
the environment
area
the environment
area
-127 -
127
0
HUD
Humidity
correction
value
correction
value
Correction value for
change in humidity
change in humidity
PRINT RATE
Print ratio
correction
value
correction
value
Correction value for
document print ratio
document print ratio
PROCON
Process
control
correction
value
control
correction
value
Correction value for
high density process
control result
high density process
control result
LIFE
Life
correction
value
correction
value
Correction value for
the developer life
the developer life
SENSITIVITY
Sensitivity
correction
value
correction
value
Correction for the
toner density
sensitivity
toner density
sensitivity
1 - 999
500
AUTO DEVE
VO (M)
VO (M)
Auto
development
adjustment
control
voltage
(at the
medium
speed)
development
adjustment
control
voltage
(at the
medium
speed)
Sensor control
voltage value after
completion of
SIM25-02
(at the medium
speed)
voltage value after
completion of
SIM25-02
(at the medium
speed)
1 - 255
128
ALL VO (M)
All the
correction
reference
control
voltages
(at the
medium
speed)
correction
reference
control
voltages
(at the
medium
speed)
Control voltage
reference value
which calculated all
the correction values
for the auto
development
adjustment value
(at the medium
speed)
reference value
which calculated all
the correction values
for the auto
development
adjustment value
(at the medium
speed)
AUTO DEVE
VO (L)
VO (L)
Auto
development
adjustment
control
voltage
(at the low
speed)
development
adjustment
control
voltage
(at the low
speed)
Sensor control
voltage value after
completion of
SIM25-02
(at the low speed)
voltage value after
completion of
SIM25-02
(at the low speed)
ALL VO (L)
All the
correction
reference
control
voltages
(at the low
speed)
correction
reference
control
voltages
(at the low
speed)
Control voltage
reference value
which calculated all
the correction values
for the auto
development
adjustment value
(at the low speed)
reference value
which calculated all
the correction values
for the auto
development
adjustment value
(at the low speed)
1 - 255
128
AREA VO
Area
correction
control
voltage
correction
control
voltage
Control voltage
correction value for
the environment
area
correction value for
the environment
area
-127 -
127
0
HUD VO
Humidity
correction
control
voltage
correction
control
voltage
Control voltage
correction value for
change in humidity
correction value for
change in humidity
PRINT RATE
VO
VO
Print ratio
correction
control
voltage
correction
control
voltage
Control voltage
correction value for
the document print
ratio
correction value for
the document print
ratio
PROCON VO
Process
control
correction
control
voltage
control
correction
control
voltage
Control voltage
correction value for
the high density
process control
result
correction value for
the high density
process control
result
LIFE VO
Life
correction
value control
voltage
correction
value control
voltage
Control voltage
correction value for
the developer life
correction value for
the developer life
SENSITIVITY
VO
VO
Sensitivity
correction
control
voltage
correction
control
voltage
Control voltage
correction value for
the toner density
sensor
correction value for
the toner density
sensor
1 - 999
500
ENV VO
Environment
correction
control
voltage
correction
control
voltage
Control voltage
correction value for
the high humidity
environment
correction value for
the high humidity
environment
-127 -
127
0
Item/Display
Content
Setting
range
Default
value
AUTO DEVE
AREA
AREA
Area in the
auto
development
adjustment
auto
development
adjustment
Humidity area
display in the
automatic developer
adjustment
display in the
automatic developer
adjustment
1 - 14
8
AREA
Current area
Current humidity
area display
area display
Item/Display
Content
Setting
range
Default
value
MX-B381/B401 SIMULATION 5 – 51
44-21
Purpose
Adjustment/Setup
Function (Purpose) Used to set the half tone process control
target.
Section
Process
Operation/Procedure
Press [EXECUTE] key.
The half tone process control target is set and the operation data
are displayed.
Press [EXECUTE] key.
The half tone process control target is set and the operation data
are displayed.
44-22
Purpose
Operation data display
Function (Purpose) Used to display the toner patch density
level in the half tone process control opera-
tion.
tion.
Section
Process
Operation/Procedure
The toner patch density level made in the half tone process control
operation is displayed.
The toner patch density level made in the half tone process control
operation is displayed.
44-24
Purpose
Operation data display
Function (Purpose) Used to display the correction target and
the correction level in the half tone process
control operation.
control operation.
Section
Process
Operation/Procedure
1)
1)
Select the display category with [NEXT] key.
Display
Content
COMPLETE
Normal complete
ERROR BLACK SENSOR
ADJUSTMENT
ADJUSTMENT
Image density sensor sensitivity
adjustment error
adjustment error
[K]
High density process control error [K]
OTHER
Other errors
Item/Display
Content
ID_n
Patch data display (n=1-16)
BASE1
Belt substrate data (START)
BASE5
Belt substrate data (LAST)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
721(5&21752/'$7$',63/$<
721(5'(1B/70
721(5'(1B670
721(5'(1B/7/
721(5'(1B67/
.
1(;7
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
+$/)721(352&2167$1'$5'9$/8(5(*,67(5
(;(&87(
728&+>(;(&87(@7+(1(;(&87,2167$57
Category
Item/Display
Content
Coefficient
[EX-LOW]
Coefficient of the
approximation formula of the
minimum density
approximation formula of the
minimum density
[LOW]
Coefficient of the
approximation formula of the
low density
approximation formula of the
low density
[CONNECT]
Coefficient of the
approximation formula of
when connecting the low
density and the medium
density
approximation formula of
when connecting the low
density and the medium
density
[MID]
Coefficient of the
approximation formula of the
medium density
approximation formula of the
medium density
[HIGH]
Coefficient of the
approximation formula of the
high density
approximation formula of the
high density
[CONNECT POINT]
Each density section
connection output ratio
connection output ratio
Reference
value
[SENSOR_TARGET]
Half tone process control
reference value
reference value
Correction
value
[S_VALUE]
Half tone process control
correction value
correction value
For printer
[PRINTER_S_VALUE]
Printer half tone process
control correction value
control correction value
[PRINTER_BASE_
DITHER_VALUE]
DITHER_VALUE]
Printer half tone process
control reference dither value
control reference dither value
[PRINTER_AUTO_HT
_VALUE]
_VALUE]
Printer auto density
adjustment correction value
adjustment correction value
Previous
correction
value
[BEFORE S_VALUE]
Previous half tone process
control value
control value
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
+$/)721(&255(&75(68/7
37.
37.
%$6(
,'
,'
,'
,'
,'
,'
,'
,'
,'
,'
,'
,'
%$6(
,'
,'
,'
,'
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
+$/)721(352&215(68/7',63/$<
1(;7
>(;/2:@$%
>/2:@$%&
>&211(&7@$%
>0,'@$%&
>+,*+@$%
>&211(&732,17@
.
Click on the first or last page to see other MX-B381 / MX-B401 (serv.man7) service manuals if exist.