Sharp MX-B381 / MX-B401 (serv.man7) Service Manual ▷ View online
MX-B381/B401 SIMULATION 5 – 32
<List of Default values and set values for each destination>
(Contents of set items)
A: Enable/Disable setting of the toner preparation message display
when the toner remaining quantity reaches 25%.
B: Enable/Disable setting of the toner preparation message display
when the toner near end status is reached.
C: Enable/Disable setting of the machine operation when the toner
end status is reached.
For except Japan, performs operation of set value "3" regardless of
the setting value.
D: Setting of the allowable quantity of copy/print/FAX after display-
ing the message when item B is set to "0" (the message is dis-
played at toner near end). (Range: 0 - 200 sheets)
The number of output print allowed in item D is based on the
assumption that the sheets are of A4 size with print ratio of 5%.
(The number of outputs allowed differs depending on the paper
size and the print ratio.)
A: Enable/Disable setting of the toner preparation message display
when the toner remaining quantity reaches 25%.
B: Enable/Disable setting of the toner preparation message display
when the toner near end status is reached.
C: Enable/Disable setting of the machine operation when the toner
end status is reached.
For except Japan, performs operation of set value "3" regardless of
the setting value.
D: Setting of the allowable quantity of copy/print/FAX after display-
ing the message when item B is set to "0" (the message is dis-
played at toner near end). (Range: 0 - 200 sheets)
The number of output print allowed in item D is based on the
assumption that the sheets are of A4 size with print ratio of 5%.
(The number of outputs allowed differs depending on the paper
size and the print ratio.)
Set values of Item D and the number of output print allowed
1: Print Disable after toner near end
2: 20 sheets print Enable after toner near end
3: 40 sheets print Enable after toner near end
4: 80 sheets print Enable after toner near end
5: 160 sheets print Enable after toner near end
1: Print Disable after toner near end
2: 20 sheets print Enable after toner near end
3: 40 sheets print Enable after toner near end
4: 80 sheets print Enable after toner near end
5: 160 sheets print Enable after toner near end
F. Enable/Disable setting of the near end message display when
the developing unit reaches near end.
G. Enable/Disable setting of the near end message display when
the OPC drum unit reaches near end.
H. Enable/Disable setting of the near end message display when
the primary transfer unit reaches near end.
I. Enable/Disable setting of the near end message display when the
secondary transfer unit reaches near end.
J. Enable/Disable setting of the near end message display when
the fusing unit reaches near end.
(Items F, G, H, I, J: When the life center reaches 90% of the speci-
fied life, it is judged as near end.)
the developing unit reaches near end.
G. Enable/Disable setting of the near end message display when
the OPC drum unit reaches near end.
H. Enable/Disable setting of the near end message display when
the primary transfer unit reaches near end.
I. Enable/Disable setting of the near end message display when the
secondary transfer unit reaches near end.
J. Enable/Disable setting of the near end message display when
the fusing unit reaches near end.
(Items F, G, H, I, J: When the life center reaches 90% of the speci-
fied life, it is judged as near end.)
NOTE: When item B is set to "0" and item D to a desired number,
printing can be made after toner near end. However, insuf-
ficient density, thin spots, or improper density and grada-
tion adjustment may be resulted depending on the using
conditions. When item D is set to "1", printing is disabled
after toner near end. In this case, toner end display is made
in the toner near end status, and copy/print/FAX outputs
are disabled.
ficient density, thin spots, or improper density and grada-
tion adjustment may be resulted depending on the using
conditions. When item D is set to "1", printing is disabled
after toner near end. In this case, toner end display is made
in the toner near end status, and copy/print/FAX outputs
are disabled.
26-73
Purpose
Setting
Function (Purpose) Used to adjust the image loss (shade
delete amount) in the name card copy
mode.
mode.
Section
Operation/Procedure
1)
1)
Select an item to be set with [
] [] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
When the adjustment value is increased, the image loss
(shade delete quantity) is increased.
C
TONER END
1
Operation Enable in
TONER END
TONER END
2
2
Operation STOP in
TONER END
TONER END
3
Operation STOP in
TONER END
TONER END
D
TONER END
COUNT
COUNT
Setting of the number of copy/
print/FAX outputs Enable after
TONER NEAR END.
print/FAX outputs Enable after
TONER NEAR END.
1
E
TONER E-MAIL
ALART
ALART
0
Condition for Low status send
of E-mail alert
of E-mail alert
1
When the toner preparation
message is displayed (in near
near toner end)
message is displayed (in near
near toner end)
1
Condition for Low status send
of E-mail alert
When near toner end
of E-mail alert
When near toner end
F
DV NEAR END
DISP
(0: YES 1: NO)
DISP
(0: YES 1: NO)
0
The developer near end
message is displayed.
message is displayed.
1
1
The developer near end
message is not displayed.
message is not displayed.
G
DR NEAR END
DISP
(0: YES 1: NO)
DISP
(0: YES 1: NO)
0
The drum near end message
is displayed.
is displayed.
1
1
The drum near end message
is not displayed.
is not displayed.
H
TC1 NEAR END
DISP
(0: YES 1: NO)
DISP
(0: YES 1: NO)
0
The primary transfer near end
message is displayed.
message is displayed.
1
1
The primary transfer near end
message is not displayed.
message is not displayed.
I
TC2 NEAR END
DISP
(0: YES 1: NO)
DISP
(0: YES 1: NO)
0
The secondary transfer near
end message is displayed.
end message is displayed.
1
1
The secondary transfer near
end message is not
displayed.
end message is not
displayed.
J
FUS NEAR END
DISP
(0: YES 1: NO)
DISP
(0: YES 1: NO)
0
The fusing near end message
is displayed.
is displayed.
1
1
The fusing near end message
is not displayed.
is not displayed.
Destination
Set value
Toner preparation
message
Toner near end message
U.S.A
0 (Displayed)
0 (Displayed)
CANADA
0 (Displayed)
0 (Displayed)
INCH
0 (Displayed)
0 (Displayed)
JAPAN
0 (Displayed)
1 (Not Displayed)
AB_B
0 (Displayed)
0 (Displayed)
EUROPE
0 (Displayed)
0 (Displayed)
U.K.
0 (Displayed)
0 (Displayed)
AUS.
0 (Displayed)
0 (Displayed)
AB_A
0 (Displayed)
0 (Displayed)
CHINA
0 (Displayed)
0 (Displayed)
Item/Display
Content
Default
value
Item/Display
Content
Setting
range
Default value
A
DELETING
SHADOW ADJ
(M)
SHADOW ADJ
(M)
Rear frame side
image loss quantity
(shade delete
quantity) adjustment
image loss quantity
(shade delete
quantity) adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
B
DELETING
SHADOW ADJ
(S)
SHADOW ADJ
(S)
Lead edge image
loss quantity (shade
delete quantity)
adjustment
loss quantity (shade
delete quantity)
adjustment
0 - 50
0
(Adjustment
amount:
0.1mm/step)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
721(51($5(1'6(77,1*
$˖
˷̚˹
˖721(535(3$5$7,21<(612
$˖
˖721(51($5(1'<(612
%˖
˖721(5(1'
&˖
˖721(5(1'&2817
'˖
˖'91($5(1'',63˄<(6˖12˅
)˖
˖721(5(0$,/$/(57
(˖
˖'51($5(1'',63˄<(6˖12˅
*˖
˖7&1($5(1'',63˄<(6˖12˅
+˖
˖7&1($5(1'',63˄<(6˖12˅
,˖
˖)861($5(1'',63˄<(6˖12˅
-˖
2.
MX-B381/B401 SIMULATION 5 – 33
26-74
Purpose
Setting
Function (Purpose) Used to set the OSA trial mode.
Section
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The functions other than OPEN USB can be used.
Use limit: 18,000 sheets JOB
Use limit: 18,000 sheets JOB
26-78
Purpose
Setting
Function (Purpose) Used to set the password of the remote
operation panel.
Section
Operation/Procedure
1)
1)
Enter a password with 10-key. (5 - 8 digits)
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
2)
Press [SET] key.
27
27-1
Purpose
Setting
Function (Purpose) Used to set non-detection of communica-
tion error (U7-00) with RIC. (FSS function)
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
27-2
Purpose
Setting
Function (Purpose) Used to set the sender's registration num-
ber and the HOST server telephone num-
ber. (FSS function)
ber. (FSS function)
Section
Operation/Procedure
1)
1)
Select an item to be set. [USER FAX NO] [SERVA TEL NO]
2)
Enter the set value with 10-key.
3)
Press [SET] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
Item/Display
Content
Setting
range
Default
value
A
OSA TRIAL
MODE
(0 : YES 1 : NO)
MODE
(0 : YES 1 : NO)
0
Used to set the
OSA trial mode.
OSA trial mode.
0 - 1
1
1
OSA trial mode is
canceled.
canceled.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
'(/(7,1*6+$'2:$'-8670(17
$˖
˷̚˹
˖'(/(7,1*6+$'2:$'-0
$˖
˖'(/(7,1*6+$'2:$'-6
%˖
2.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
26$75,$/02'(6(77,1*
$˖
˷̚˹
˖26$75,$/02'(<(6˖12
$˖
2.
0
Not detection
1
Detection
USER
FAX_NO.
FAX_NO.
Sender registration number (Max. 16 digits)
SERVA
TEL_NO.
TEL_NO.
Host server telephone number (Max. 16 digits)
• If the connection process is not completed normally
• If the connection process is not completed normally
when registering the FSS, calling to the HOST may
be continuously made every time when the power is
turned ON (from OFF) or rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
be continuously made every time when the power is
turned ON (from OFF) or rebooted.
In this case, enter "********" to inhibit calling to the
HOST.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
523(3$66:25'6(77,1*
35(6(17˖
ǂǂ1(:˖
ǂǂ1(:˖
6(7
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
',6$%/,1*2)87528%/(
$˖
˷̚˹
˖',6$%/(<(6
$˖
2.
MX-B381/B401 SIMULATION 5 – 34
27-4
Purpose
Setting
Function (Purpose) Used to set the initial call and toner order
auto send. (FSS function)
Section
Operation/Procedure
1)
1)
Select an item to be set with [
] [] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)66)81&7,216(783,1387
35(6(17˖
ǂǂ1(:˖
ǂǂ1(:˖
6(7
86(5)$;B12
6(59$7(/B12
3$86(
Item/Display
Content
Setting
range
Default value
Remarks
A
FSS MODE
NEB1
Set the FSS MODE
Exclusive for send
in NE-B mode
in NE-B mode
0 - 3
0
1
NEB2
Send/Receive in
NE-B mode
NE-B mode
1
NFB1
Exclusive for send
in NE-F mode
in NE-F mode
2
NFB2
Send/Receive in
NE-F mode
NE-F mode
3
B
RETRY_BUSY
Resend number setting when busy
0 - 15
2
* 0: No retry
C
TIMER (MINUTE) _BUSY
Resend timer setting (minute) when busy
1 - 15
3
D
RETRY_ERROR
Resend number setting when error
0 - 15
1
* 0: No retry
E
TIMER (MINUTE) _ERROR
Resend timer setting (minute) when error
1 - 15
1
F
TONER ORDER
TIMING (K)
TIMING (K)
100% - 75%
Toner order auto send
timing setting
timing setting
100% - 75%
0 - 5
5
3 (49%-25%)
74% - 50%
74% - 50%
4
49% - 25%
49% - 25%
3
LOWER 25
25% or less
2
NEAREND
NEAREND
1
EMPTY
EMPTY
0
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)66)81&7,216(783
$˖
˷̚˹
˖)6602'(1(%
$˖
˖5(75<B%86<
%˖
˖7,0(50,187(B%86<
&˖
˖5(75<B(5525
'˖
˖721(525'(57,0,1*.
)˖
˖7,0(50,187(B(5525
(˖
2.
MX-B381/B401 SIMULATION 5 – 35
27-5
Purpose
Setting
Function (Purpose) Used to set the machine tag No. (This func-
tion allows the host computer to check the
machine tag No.) (FSS function)
machine tag No.) (FSS function)
Section
Communication (RIC/MODEM)
Operation/Procedure
1)
1)
Enter the password (max. 8 digits) with 10-key.
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.
2)
Press [SET] key.
27-6
Purpose
Setting
Function (Purpose) Used to set of the manual service call.
(FSS function)
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
27-7
Purpose
Setting
Function (Purpose) Used to set of the enable, alert call out.
(FSS function)
Section
Operation/Procedure
1)
1)
Select an item to be set with [
] [] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
*1 The FSS function setting can be changed only from Disable to
Enable. (Cannot be changed from Enable to Disable.)
*2 Alert send timing
Enable. (Cannot be changed from Enable to Disable.)
*2 Alert send timing
27-9
Purpose
Setting
Function (Purpose) Used to set the paper transport time record-
ing YES/NO threshold value and shading
gain adjustment retry number.
(FSS function)
gain adjustment retry number.
(FSS function)
Section
Operation/Procedure
1)
1)
Select an item to be set with [
] [] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
* Item A, B: 0%, standard passing time between sheets of paper;
100%, time for judgment as a jam between sheets of paper.
* Item C: Setting of 20 is invalid.
0
Allow (Default)
1
Inhibit
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
7$*6(77,1*
35(6(17˖
ǂǂ1(:˖
ǂǂ1(:˖
6(7
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
0$18$/6(59,&(&$//6(783
$˖
˷̚˹
˖<(612
$˖
2.
A
FUNCTION
0
FSS function enable
1
FSS function disable (*1) (Default)
B
ALERT
0
Alert call enable (*2) (Default)
1
Alert call disable
No alert cause
Initial state / Trouble / Continuous JAM alert
Maintenance
When the maintenance timing is reached.
Service call
When pressing Service call.
Toner send request
When the toner order automatic send setting is
reached.
reached.
Toner collection request
Revision of the toner installation date (only for
a new product)
a new product)
Alert resend
A
FEED TIME 1
0 - 100
Threshold value of the paper
transport time between sensors
(Main unit) (50: Default)
transport time between sensors
(Main unit) (50: Default)
B
FEED TIME 2
0 - 100
Threshold value of the paper
transport time between sensors
(RSPF) (50: Default)
transport time between sensors
(RSPF) (50: Default)
C
GAIN
ADJUSTMENT
RETRY
ADJUSTMENT
RETRY
0 - 20
Threshold value of the gain
adjustment retry number
(11: Default)
adjustment retry number
(11: Default)
D
JAM ALERT
1 - 100
Alert judgment threshold value
for occurrence of continuous
jams (Setting of the number of
times of continuous jams as the
alert for continuous jams)
(Default: 10 times)
for occurrence of continuous
jams (Setting of the number of
times of continuous jams as the
alert for continuous jams)
(Default: 10 times)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)66)81&7,216(783)81&7,21
$˖
˷̚˹
˖)81&7,21<(612
$˖
˖$/(57<(612
%˖
2.
Click on the first or last page to see other MX-B381 / MX-B401 (serv.man7) service manuals if exist.