Sharp MX-B381 / MX-B401 (serv.man7) Service Manual ▷ View online
MX-B381/B401 SIMULATION 5 – 24
24-7
Purpose
Data clear
Function (Purpose) Used to clear the OPC drum counter. (After
replacement of the OPC drum, clear the
counter.)
counter.)
Section
Operation/Procedure
1)
1)
Select the item to be cleared.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
The drum rotation number accumulation counter is not displayed
on the LCD screen, but cleared in conjunction with execution of this
simulation.
on the LCD screen, but cleared in conjunction with execution of this
simulation.
24-9
Purpose
Data clear
Function (Purpose) Used clear the printer mode print counter
and the self print mode print counter.
Section
Operation/Procedure
1)
1)
Select the item to be cleared.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
24-10
Purpose
Data clear
Function (Purpose) Used to clear the FAX counter.
(Only when FAX is installed)
Section
Operation/Procedure
1)
1)
Select the item to be cleared.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
24-15
Purpose
Data clear
Function (Purpose) Used to clear the counters related to the
scan mode and the image send.
Section
Operation/Procedure
1)
1)
Select the item to be cleared.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
Drum cartridge print counter
Drum cartridge accumulated traveling distance (cm)
Number of day that used drum (Day)
Drum cartridge accumulated traveling distance (cm)
Number of day that used drum (Day)
PRINT BW
Print counter
OTHER BW
Other counter
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
&23<&2817(5'$7$&/($5
&23<%:
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
'580&75*&2817(5&/($5
.
$5(<28685("
<(6
12
(;(&87(
FAX OUTPUT
FAX print quantity counter (for line 1)
FAX SEND
FAX send counter
FAX RECEIVED
FAX receive counter
SEND IMAGES
FAX send quantity counter (for line 1)
SEND TIME
FAX send time
RECEIVED TIME
FAX receive time
ACR SEND
Number of carrier prefix adding communications
NET SCN ORG_B/W
Network scanner document read quantity
counter (B/W scan job)
counter (B/W scan job)
NET SCN ORG_CL
Network scanner document read quantity
counter (COLOR scan job)
counter (COLOR scan job)
INTERNET FAX
OUTPUT
OUTPUT
Number of Internet FAX output
INTERNET FAX
SEND OUTPUT
SEND OUTPUT
Number of Internet FAX sending page
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
35,1727+(5&2817(5&/($5
35,17%:
27+(5%:
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)$;&2817(5'$7$&/($5
)$;ǂ287387
)$;6(1'
6(1',0$*(6
)$;5(&(,9('
6(1'7,0(
5(&(,9('7,0(
$&56(1'
$5(<28685("
<(6
12
(;(&87(
MX-B381/B401 SIMULATION 5 – 25
24-30
Purpose
Data clear
Function (Purpose) Used to initialize the administrator pass-
word.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The administrator password is initialized.
The administrator password is initialized.
If the administrator password of system setting and Web page is
forgotten, execute this simulation to set the password to "admin"
(default).
forgotten, execute this simulation to set the password to "admin"
(default).
24-31
Purpose
Data clear
Function (Purpose) Used to initialize the service mode pass-
word.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The service mode password is initialized.
The service mode password is initialized.
If the password of Web page is forgotten, execute this simulation to
set the password to "service" (default).
set the password to "service" (default).
25
25-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the devel-
oping section.
Section
Process (Developing section)
Operation/Procedure
1)
1)
Select the process speed.
2)
Press [EXECUTE] key.
The developing drive motor rotate for 3 minutes and the output
level of the toner density sensor is displayed.
The developing drive motor rotate for 3 minutes and the output
level of the toner density sensor is displayed.
25-2
Purpose
Setting
Function (Purpose) Used to make the initial setting of toner
density when replacing developer. (Auto-
matic adjustment)
matic adjustment)
Section
Image process (Photo-conductor/
Developing/Transfer/Cleaning)
Developing/Transfer/Cleaning)
Operation/Procedure
1)
1)
Press [K] key.
2)
Press [EXECUTE] key.
The developing motor rotates, and the toner density sensor
makes sampling of the toner density. The detected level is dis-
played.
After stopping the developing motor, the average value of the
toner density sampling results is set as the reference toner
density control level.
The developing motor rotates, and the toner density sensor
makes sampling of the toner density. The detected level is dis-
played.
After stopping the developing motor, the average value of the
toner density sampling results is set as the reference toner
density control level.
INTERNET FAX
RECEIVE
RECEIVE
Number of Internet FAX receive
INTERNET FAX SEND
Number of Internet FAX send
MAIL COUNTER
Number of times of E-MAIL send
FTP COUNTER
Number of FTP send
SMB SEND
Number of SMB send
USB CNT
Number of times of USB storage
TRIAL MODE_B&C
Trial mode counter (B/W & COLOR scan job)
SCAN TO HDD_B/W
SCAN TO HDD record quantity (B/W)
SCAN TO HDD_CL
SCAN TO HDD record quantity (COLOR)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
1(7:25.6&$11(5&2817(5'$7$&/($5
1(76&125*B%:
1(76&125*B&/
,17(51(7)$;287387
,17(51(7)$;6(1'287387
,17(51(7)$;5(&(,9(
,17(51(7)$;6(1'
0$,/&2817(5
)73&2817(5
60%6(1'
86%&17
75,$/02'(B% &
6&$172+''B%:
6&$172+''B&/
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$'0,13$66:25',1,7,$/,=(
$5(<28685("
<(6
12
(;(&87(
TCD_K
Toner density sensor control voltage level K
TCV_K
Toner density sensor K
LOW
Process speed: Low speed
MIDDLE
Process speed: Middle speed
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6(59,&(3$66:25',1,7,$/,=(
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
721(56(1625287387021,725
(;(&87(
7&'B.
7&9B.
(;(&87(
0,''/(
/2:
MX-B381/B401 SIMULATION 5 – 26
NOTE: When the above operation is interrupted on the way, the
reference toner concentration level is not set. Also when
error code of EE-EC, EE-EL or EE-EU is displayed, the ref-
erence toner density level is not set normally.
error code of EE-EC, EE-EL or EE-EU is displayed, the ref-
erence toner density level is not set normally.
Do not execute this simulation except when new developer is sup-
plied. If it is executed in other cases, under toner or over toner may
occur, causing a trouble.
plied. If it is executed in other cases, under toner or over toner may
occur, causing a trouble.
Display during operation
Display after completion of the adjustment
Display and condition in case of an error
26
26-2
Purpose
Setting
Function (Purpose) Used to set the paper weight type.
Section
Section
Paper feed
Operation/Procedure
Select a paper type to be changed.
Select a paper type to be changed.
This setting is linked with SIM26-6. When the set value (destina-
tion) of SIM26-6 is changed, this setting is also changed accord-
ingly.
To set a desirable type without linking with the destination, use this
simulation.
tion) of SIM26-6 is changed, this setting is also changed accord-
ingly.
To set a desirable type without linking with the destination, use this
simulation.
26-3
Purpose
Setting
Function (Purpose) Used to set the specifications of the auditor.
(Setting must be made according to the
auditor use conditions.)
auditor use conditions.)
Section
Auditor
Operation/Procedure
Select a setting target and a setting condition.
Select a setting target and a setting condition.
TCD_K
Toner density sensor control voltage level K
TCV_K
Toner density sensor K
Mode
Display
Range
Toner density control adjustment value
in the low speed process mode
in the low speed process mode
AT DEVE ADJ_L_K
1 - 255
Toner density control adjustment value
in the medium speed process mode
in the medium speed process mode
AT DEVE ADJ_M_K
1 - 255
Toner density sensor control voltage
level in the low speed process mode
level in the low speed process mode
AT DEVE VO_L_K
1 - 255
Toner density sensor control voltage
level in the medium speed process
mode
level in the medium speed process
mode
AT DEVE VO_M_K
1 - 255
Error
display
Error name
Error details
EE-EL
EL error
The sensor output level is lower than 77, or
the control voltage level is higher than 207.
the control voltage level is higher than 207.
EE-EU
EU error
The sensor output level is higher then 177,
or the control voltage level is lower than 52.
or the control voltage level is lower than 52.
EE-EC
EC error
The sensor output level is out of 128
10.
G/LBS SET
0
GRAM
1
LBS
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$8720$7,&'(9(/23(5$'-8670(17
(;(&87(
$7'(9($'-B/B.
$7'(9($'-B0B.
$7'(9(92B/B.
$7'(9(92B0B.
.
Destinations
Set value
G/LBS SET
U.S.A.
LBS
CANADA
LBS
INCH
LBS
JAPAN
GRAM
AB_B
GRAM
EUROPE
GRAM
U.K.
GRAM
AUS.
GRAM
AB_A
GRAM
CHINA
GRAM
Item/Display
Content
Default
value
BUILT-IN
AUDITOR
AUDITOR
P10
Built-in auditor mode (standard
mode) operation.
mode) operation.
P10
EC1
EC1 mode operation
OUTSIDE
AUDITOR
AUDITOR
NONE
No external connection vendor
is used.
is used.
NONE
P VENDOR1
Coin vendor mode
(Only the copy mode can be
controlled.)
(Only the copy mode can be
controlled.)
P VENDOR2
Vendor mode communicating
with the parallel I/F (for
DocuLyzer) (Japan only)
with the parallel I/F (for
DocuLyzer) (Japan only)
P OTHER
NOT USED
VENDOR-EX*
Vendor I/F specifications for
EQUITRAC (Multi job cuing
Disable mode)
EQUITRAC (Multi job cuing
Disable mode)
VND_EX_MT*
Vendor I/F specifications for
EQUITRAC (Multi job cuing
Enable mode)
EQUITRAC (Multi job cuing
Enable mode)
S_VENDOR
Serial vendor mode
DOC ADJ
ON
Support for the auditor in
document filing print
document filing print
OFF
OFF
No support for the auditor in
document filing print
document filing print
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6,=(6(783
*5$0
/%6
*/%66(7
˖
MX-B381/B401 SIMULATION 5 – 27
(*) Displayed only when EQUITRAC is used.
( ) Details of the vendor mode
Operation 1:
Standby during setting time of auto clear. Default is 60 seconds,
which can be changed in the system setting.
Operation 2:
Auto clear is not made.
Operation 3:
The display is shifted to the initial screen.
Standby during setting time of auto clear. Default is 60 seconds,
which can be changed in the system setting.
Operation 2:
Auto clear is not made.
Operation 3:
The display is shifted to the initial screen.
26-6
Purpose
Setting
Function (Purpose) Used to set the specifications (paper, fixed
magnification ratio, etc.) of the destination.
Section
Operation/Procedure
1)
1)
Select an item to be set.
2)
Press [EXECUTE] key.
The selected set content is saved.
The selected set content is saved.
26-10
Purpose
Setting
Function (Purpose) Used to set the trial mode of the network
scanner.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
PF ADJ
ON
Continuous printing is
performed in the duplex print
mode.
If the remaining money expires
during continuous printing, the
sheets in the machine are
discharged without being
printed on the back surfaces.
performed in the duplex print
mode.
If the remaining money expires
during continuous printing, the
sheets in the machine are
discharged without being
printed on the back surfaces.
OFF
OFF
Continuous printing is not
performed in the duplex print
mode. (The remaining amount
is checked for printing every
surface in all the printing
process.)
If the remaining money expires
during printing, the sheet is
discharged without printing on
the back surface.
performed in the duplex print
mode. (The remaining amount
is checked for printing every
surface in all the printing
process.)
If the remaining money expires
during printing, the sheet is
discharged without printing on
the back surface.
VENDOR
MODE (
MODE (
)
MODE1
Vendor mode 1
MODE
3
MODE2
Vendor mode 2
MODE3
Vendor mode 3
COUNTUP
TIMING
TIMING
FUSER_IN
When the paper lead edge
passes the fusing rear sensor.
passes the fusing rear sensor.
EXIT_
OUT
FUSER_OUT
When the paper rear edge
passes the fusing rear sensor.
passes the fusing rear sensor.
EXIT_OUT
When the paper rear edge
passes the paper exit sensor in
the main unit, the right tray, and
the after process unit.
passes the paper exit sensor in
the main unit, the right tray, and
the after process unit.
Completion
of the
specified
quantity.
(Money
remaining)
Insufficient money during
copy job
Completion
of the
specified
quantity.
(No money
remaining)
remaining)
BW/Color
(no money
remaining)
remaining)
Color
(Money
remaining)
Condition 1
Condition 2
Condition 3
Condition 4
MODE1
Operation 1
Operation 2
Operation 2
Operation 1
MODE2
Operation 1
Operation 1
Operation 2
Operation 1
MODE3
Operation 1
Operation 3
Operation 2
Operation 3
Item/Display
Content
Default
value
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$8',7256(783
3
(&
%8,/7,1$8',725
˖
121(
39(1'25
39(1'25
2876,'($8',725
˖
327+(5
9(1'25(;
21
2))
'2&$'-
˖
21
2))
3)$'-
˖
02'(
02'(
02'(
9(1'2502'(
˖
)86(5B,1
(;,7B287
)86(5B287
&2817837,0,1*
˖
9(1'25(;08/7,
6B9(1'25
U.S.A.
United States of America
CANADA
Canada
INCH
Inch series, other destinations
JAPAN
Japan
AB_B
AB series (B5 detection), other destinations
EUROPE
Europe
U.K.
United Kingdom
AUS.
Australia
AB_A
AB series (A5 detection), other destinations
CHINA
China
TRIAL MODE
(0 : YES 1 : NO)
0
Trial mode setting
1
Trial mode cancel (Default)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
'(67,1$7,216(783
(;(&87(
86$
&$1$'$
-$3$1
,1&+
$%B%
(8523(
$86
8.
$%B$
&+,1$
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
1(7:25.6&$11(575,$/02'(6(783
$˖
˷̚˹
˖75,$/02'(<(612
$˖
2.
Click on the first or last page to see other MX-B381 / MX-B401 (serv.man7) service manuals if exist.