DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual ↓ Size: 3.61 MB | Pages: 127 in PDF or view online for FREE

MX-7000N  SIMULATION  7 – 8

63

1

Used to check the shading correction result. 

Adjustment/Setting/Operation data 
check

Scanner

2

Used to perform shading. 

Adjustment

3

Used to perform scanner color balance and color coefficient auto 
adjustment.

Adjustment/Setting

Scanner

5

Used to perform the scanner color balance and the color coefficient auto 
adjustment. 

Adjustment/Setting

6

Used to perform the engine color balance auto adjustment pattern setting. 

Adjustment/Setting

7

Used to perform the auto density setting of the engine auto adjustment 
scanner target value. (Servicing)

Adjustment/Setting

8

Used to perform the initial value reset of the engine auto adjustment scanner 
target value. (Servicing)

Adjustment/Setting

11

Used to set the reference scanner target value for the engine auto density 
adjustment. 

Adjustment/Setting

64

1

Used to perform the self print. (Color mode)

Operation test/Check

2

Used to print the density adjustment pattern. 

Operation test/Check

3

Used to perform self print (monochrome mode).

Operation test/Check

4

Used to perform the printer self print.
* When FIERY is supported, SIM is not displayed.

Operation test/Check

5

Used to perform the printer self print (PCL).
* When FIERY is supported, SIM is not displayed.

Operation test/Check

6

Used to perform the printer self print (PS).
* When FIERY is supported, SIM is not displayed.

Operation test/Check

65

1

Used to perform the touch panel (LCD display) detection position 
adjustment. 

Adjustment

Operation panel section 

2

Used to check the touch panel (LCD display) detection position adjustment 
result. 

Operation check/test

5

Used to check the operation panel key input. 

Operation check/test

66

1

Used to change and check the soft switch setting.

Setting

2

Used to clear the soft switch and set the default value.

Data clear

3

Used to check the operation (read/write) of the FAX PWB memory. 

Operation test, check

FAX

4

Used to check the output operation (MODEM operation) of data signal in 
each data output mode of FAX. Send level: MAX

Operation check, test

FAX

5

Used to check the output operation (MODEM operation) of data signal in 
each data output mode of FAX. Send level: Soft switch setting

Operation test, check

FAX

6

Used to print the confidential pass code.

User data output, check

FAX

7

Used to output the image memory data (memory send and receive).
* The confidential receive contents are also outputted.

User data output, check

FAX

8

Used to check the output operation (audio output IC operation check) of the 
various audio signals of FAX. Send level: MAX

Operation test, check

FAX

9

Used to check the output operation (audio output IC operation) of various 
audio signals of FAX. Send level: Soft switch setting

Operation test, check

FAX

10

Used to clear all the data (memory receive and send) of the image memory.
* The confidential receive data are cleared simultaneously.

Data clear

FAX

11

Used to check the output operation (MODEM operation) in the FAX G3 
mode 300bps. Send level: MAX

Operation test, check

FAX

12

Used to check the output operation (MODEM operation) in the FAX G3 
mode 300bps. Send level: Set with the soft switch.

Operation test, check

FAX

13

Used to set the number for the FAX dial signal output test. (In the dial signal 
output test with SIM66-14 - 16, the dial number set with this simulation is 
outputted.)

Setting

FAX

14

Used to set the make time in the FAX pulse dial mode (10PPS) and to 
execute the dial signal output test. (The signal of the dial number set with 
SIM66-13 is outputted.)

Setting/Operation test, check

FAX

15

Used to set the make time in the FAX pulse dial mode (20PPS) and to 
execute the dial signal output test. (The signal of the dial number set with 
SIM 66-13  is outputted.)

Setting/Operation test, check

FAX

16

Used to perform the dial signal (DTMF) output test in the FAX tone dial 
mode. (The signal of the dial number set with SIM 66-13 is outputted.) 
The send level can be set to an optional level.

Setting/Operation test, check

FAX

17

Used to perform the dial signal (DTMF) output test in the FAX tone dial 
mode. Send level: MAX

Operation test, check

FAX

18

Used to perform the dial signal (DTMF) output test in the FAX tone dial 
mode. Send level: Set with the soft switch.

Operation test, check

FAX

19

Used to backup the address book data stored in the HDD. (Backup to the 
Flash ROM)

Backup

20

Used to transfer the address book data stored in the Flash ROM. (Transfer 
to HDD)

Data transfer

21

Used to print information abut FAX (various registrations, communication 
management, file management, system errors, protocols).

Adjustment, setting, operation data 
check

FAX

24

Used to clear the FAST memory data.

Clear

FAX

25

Used to register a FAX number for MODEM dial-in.

Setting

FAX

26

Used to register an external telephone number for MODEM dial-in.

Setting

FAX

MX-7000N  SIMULATION  7 – 9

66

29

Used to clear the data related to the address book (one-touch registration, 
FTP/ Desktop extension, group extension, program registration, interface 
memory box, meta data, Inbound Routing, Document Admin table).

Data clear

30

Used to check a change in the TEL/LIU status.

Operation test, check

FAX

31

Used to set the TEL/LIU output port.

Operation check

FAX

32

Used to check the received data (fixed data) from the line.

Operation test, check

FAX

33

Used to detect the line signals (BUSY TONE/CNG/CED/FNET/DTMF).

Operation test, check

FAX

34

Used to measure the communication time of the send test image data. 

Operation test, check

FAX

36

Used to perform the interface check between the MFP controller and the 
MDMC. (Data line or command line check)

Operation test, check

FAX

39

Used to set the destination.

Setting

FAX

42

Used to rewrite the power control program again to the FAX BOX.

Setting

FAX

43

Used to write the adjustment value of the power control program to the FAX 
BOX.

Setting

FAX

67

17

Used to set the printer controller memory clear and default value.

Setting

24

Used to perform the printer setting of auto color calibration. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

25

Used to perform the manual correction setting of the printer engine color 
balance. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

26

Used to perform the reference scanner target value setting of the printer 
engine auto density adjustment. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

27

Used to perform the scanner target value registration of the printer engine 
auto density adjustment.
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

28

Used to perform the scanner target value registration of the printer engine 
auto adjustment.
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

30

Used to perform delivery setting of the main unit calibration data and the 
process correction data to a client PC. (for GDI printer)
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

31

Used to clear the printer calibration value. 
* When FIERY is supported, SIM is not displayed.

Data clear

32

Used to perform the screen/color select function setting for each object. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

33

Used to perform the gamma correction (for PCL) between printer screens. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

33

Used to perform gamma correction (for GDI) between printer screens. 
* When FIERY is supported, SIM is not displayed.

Adjustment/Setting

MX-7000N  SIMULATION  7 – 10

 

 

1-1

Operation test/Check

Function (Purpose) Used to check the operations of the scan-

ner (read) unit and its control circuit.

Optical (Image scanning)

Operation/Procedure
1)

Select the operation mode and the magnification ratio with the
touch panel key. 

2)

Press [EXECUTE] key.
The scanner performs scanning at the speed corresponding to
the operation mode.

 

1-2

Operation test/Check

Function (Purpose) Used to check the operation of sensor in

the scanning (read) section and the related
circuit.

Optical (Image scanning)

Operation/Procedure
The operating status of the sensor is displayed. 
* When "MHPS" is highlighted, the scanner unit is in the home

position.

 

1-5

Operation test/Check

Function (Purpose) Used to check the operations of the scan-

ner (read) unit and its control circuit.

Optical (Image scanning)

Operation/Procedure
1)

Select the operation mode and the magnification ratio with the
touch panel key. 

2)

Press [EXECUTE] key.
The scanner performs scanning at the speed corresponding to
the operation mode.

 

 

2-1

Operation test/Check

Function (Purpose) Used to check the operations of the auto-

matic document feeder unit and the control
circuit.

DSPF

Operation/Procedure
1)

Select the operation mode and the magnification ratio with the
touch panel key. 

2)

Press [EXECUTE] key.
The DSPF repeats paper feed, transport, and paper exit oper-
ations according to the operation mode.
When [EXECUTE] key is pressed, the operation is terminated.

50

50%

Color: 50%, 100%, 200%

Black and white (High speed):

100%, 200%

Black and white (Low speed):

50%, 100%, 200%

100%

100

100%

200

200%

CLOSE

BLACK(SLOW)

SIMULATION NO.01-01

SCANNER CHECK

TEST

EXECUTE

150

200

ZOOM

100

㧑

BLACK(FAST)

COLOR

25

50

100

300

400

SCANNER SENSOR CHECK

CLOSE

SIMULATION NO.01-02

TEST

1/1

MHPS

50

50%

Color: 50%, 100%, 200%

Black and white (High speed):

100%, 200%

Black and white (Low speed):

50%, 100%, 200%

100%

100

100%

200

200%

50

50%

Color: 50%, 100%, 200%

Black and white (High speed):

100%, 200%

Black and white (Low speed):

50%, 100%, 200%

100%

100

100%

200

200%

CLOSE

BLACK(SLOW)

SIMULATION NO.01-05

SCANNER CHECK

TEST

EXECUTE

150

200

ZOOM

100

%

BLACK(FAST)

COLOR

25

50

100

300

400

CLOSE

BLACK(SLOW)

SIMULATION NO.02-01

DSPF AGING

TEST

EXECUTE

150

200

ZOOM

100

%

BLACK(FAST)

COLOR

25

50

100

300

400

MX-7000N  SIMULATION  7 – 11

 

2-2

Operation test/Check

Function (Purpose) Used to check the operations of the sen-

sors and detectors in the automatic docu-
ment feeder unit and the control circuits.

DSPF

Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
Sensors and detectors which are turned on are highlighted. 

NOTE: SWD_LEN and SWD_AD are not ON/OFF display.

 

2-3

Operation test/Check

Function (Purpose) Used to check the operations of the loads

in the automatic document feeder unit and
the control circuits.

DSPF

Operation/Procedure
1)

Select a target of the operation check with the touch panel. 

2)

Press [EXECUTE] key.
The selected load is operated.
When [EXECUTE] is pressed, the operation is stopped.

 

 

3-2

Operation test/Check

Function (Purpose) Used to check the operation of sensor and

detector in the finisher and the control cir-
cuits.

Finisher

Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
Sensors and detectors which are turned on are highlighted. 

SSET

DSPF installation detection

SOCD

DSPF open/close detection

SCOV

DSPF cover SW

SLCOV

DSPF lower door open/close detection

SPED1

DSPF document empty detection

SPED2

DSPF document detection

SPPD1

DSPF document pass detection 1

SPPD2

DSPF document pass detection 2

SPPD3

DSPF document pass detection 3

SPPD4

DSPF document pass detection 4

SPPD5

DSPF document pass detection 5

SPOD

DSPF paper exit detection

SPRDMD

DSPF random feed paper size detection

SPLS1

DSPF document length detection short

SPLS2

DSPF document length detection long

STLD

DSPF document tray lower limit detection

STUD

DSPF document tray upper limit detection

STMPU

DSPF stamp unit installation detection

SWD_LEN

DSPF guide plate position

SWD_AD

DSPF document detection volume output

SPUM

DSPF paper feed motor

SPFM

DSPF transport motor

SPOM

DSPF paper exit motor

SLUM

DSPF lift motor

SPFFAN

DSPF fan motor

SPFC

DSPF paper feed clutch

SRRC

DSPF resist roller clutch

SRRBC

DSPF resist roller break clutch

DSPF SENSOR CHECK SWD_LEN : **** SWD_AD : ***

CLOSE

SIMULATION NO.02-02

TEST

1/1

SSET

SOCD

SCOV

SLCOV

SPED1

SPED2

SPPD1

SPPD2

SPPD3

SPPD4

SPPD5

SPOD

SPRDMD

SPLS1

SPLS2

STLD

STUD

STMPU

STRRC

DSPF No. 1 resist roller clutch

STRRBC

DSPF No. 1 resist roller break clutch

STRC

DSPF transport clutch

STMPS

Stamp solenoid (only when installed)

FJPID

Interface transport unit entry port detection

FJPOD

Interface transport unit exit port detection

FJPDD

Interface transport unit cover detection

FED

Entry port paper detection

FAED1

Tray 1 area detection 1

FAED2

Tray 1 area detection 2

FAED3

Tray 1 area detection 3

FFJHPD

Alignment plate HP detection front

FRJHPD

Alignment plate HP detection rear

FBED1

Tray 1 paper detection

FBED2

Tray 2 paper detection

FCCD

Tray approaching detection

FSLD1

Tray 1 paper surface detection

FPDD1

Paper exit detection 

FSLD2

Tray 2 paper surface detection

FASHPD

Rear edge assist HP detection

FSWHPD

Oscillation guide HP detection

FSWOPD

Oscillation guide open detection

FSTPD

Staple tray paper detection

FSHPD

Staple drive HP detection 

FSTHPD

Staple shift HP detection

FSD

Staple empty detection

FSTD

Needle lead edge position detection

FFANLK

Fan motor lock detection

FSJOGD

Stapler alignment interference detection 

FSAD

Staple safety SW

FSSUC

Saddle staple unit detection

FSHTD

Shutter open detection

FCD

Upper door open detection 

FFDD

Front cover open detection

F24V

24V output interruption detection 

FPSW1

PUSHSW1 detection

FPSW2

PUSHSW2 detection

FPSW3

PUSHSW3 detection

SIMULATION NO.02-03

TEST

DSPF OUTPUT CHECK

1/1

CLOSE

SPUM

SPFM

SPOM

SLUM

SPFFAN

SPFC

SRRC

SRRBC

STRRC

STRRBC

STRC

EXECUTE

STMPS