Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual ▷ View online
MX-7000N SIMULATION 7 – 21
9-3
Purpose
Operation test/Check
Function (Purpose) Used to check the operations of the loads
in the duplex section and the control cir-
cuits.
cuits.
Section
Duplex
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel.
2)
Press [EXECUTE] key.
The selected load is operated.
When [EXECUTE] is pressed, the operation is stopped.
The selected load is operated.
When [EXECUTE] is pressed, the operation is stopped.
10
10-1
Purpose
Operation test/Check
Function (Purpose) Used to check the operation of the load
(motor) in the process section and the
related circuits.
* This check must be performed with no
toner bottle installed.
related circuits.
* This check must be performed with no
toner bottle installed.
Section
Process (Developing)
Operation/Procedure
1)
1)
Select a target of the operation check with the touch panel.
2)
Press [EXECUTE] key.
The selected load is operated for 10 sec.
When [EXECUTE] is pressed, the operation is stopped.
The selected load is operated for 10 sec.
When [EXECUTE] is pressed, the operation is stopped.
*
This key operates both the hopper motor K and the intermediate
hopper stirring motor.
hopper stirring motor.
10-2
Purpose
Operation test/Check
Function (Purpose) Used to check the operations of the toner
remaining quantity sensor and the control
circuit.
circuit.
Section
Process (Developing)
Operation/Procedure
When [EXECUTE] key is pressed, the toner motor is driven for 10
sec and the toner remaining quantity in the toner hopper is dis-
played.
No toner remaining: Normal display
Toner remaining: Highlighted display
When [EXECUTE] key is pressed, the toner motor is driven for 10
sec and the toner remaining quantity in the toner hopper is dis-
played.
No toner remaining: Normal display
Toner remaining: Highlighted display
13
13--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag "U1" trouble.
Section
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to execute cancellation of the trouble.
ADMH
ADU 1 motor (H)
ADML
ADU 2 motor (L)
ADUGS
Gate solenoid
TM_K1
Toner motor K1
TM_C
Toner motor C
TM_M
Toner motor M
TM_Y
Toner motor Y
TM_K2
Toner motor K2
FIN SENSOR CHECK
CLOSE
SIMULATION NO.09-02
TEST
1/1
DSW_ADU
APPD1
APPD2
SIMULATION NO.09-03
TEST
ADU LOAD CHECK
1/1
ADMH
ADML
ADUGS
CLOSE
EXECUTE
PHTM_K
Vertical transport motor K
HTM_K*
Hopper motor K
HTM_C
Hopper motor C
HTM_M
Hopper motor M
HTM_Y
Hopper motor Y
HTCS_K
Hopper remaining quantity sensor K
HTCS_C
Hopper remaining quantity sensor C
HTCS_M
Hopper remaining quantity sensor M
HTCS_Y
Hopper remaining quantity sensor Y
SIMULATION NO.10-01
TEST
TONER MOTOR ACTIVATION
EXECUTE
1/1
TM_K1
TM_C
TM_M
TM_Y
CLOSE
TM_K2
PHTM_K
HTM_K
HTM_C
HTM_M
HTM_Y
ALL
TONER HOPPER SENSOR CEHCK
CLOSE
SIMULATION NO.10-02
TEST
1/1
HTCS_K
HTCS_C
HTCS_M
HTCS_Y
EXECUTE
MX-7000N SIMULATION 7 – 22
14
14--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel excluding the self-diag "U1/
U2/LCC/PF" troubles.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to execute cancellation of the trouble.
15
15--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag "U6-09, F3-12,
F3-22 (large capacity paper feed tray,
paper feed tray 1, 2)" trouble.
paper feed tray 1, 2)" trouble.
Section
LCC
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to execute cancellation of the trouble.
16
16--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag "U2" trouble.
Section
Section
MFPcnt PWB / PCU PWB / SCU PWB
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to execute cancellation of the trouble.
17
17--
Purpose
Clear/cancel (Trouble etc.)
Function (Purpose) Used to cancel the self-diag "PF" trouble.
Section
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key to execute cancellation of the trouble.
21
21-1
Purpose
Setting
Function (Purpose) Used to set the maintenance cycle.
Section
Section
Operation/Procedure
1)
1)
Select an item to be set with [
↑] and [↓] keys on the touch
panel.
2)
Enter the adjustment value with 10-key.
3)
Press [OK] key. (The set value is saved.)
SIMULATION NO.13
TEST
U1 TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
SIMULATION NO.14
TEST
TROUBLE CANCELLATION(OTHER)
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
SIMULATION NO.15
TEST
LCC TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
Maintenance timing display
Default value
A
MAINTENANCE
COUNTER (TOTAL)
COUNTER (TOTAL)
Maintenance
counter (Total)
counter (Total)
300K
B
MAINTENANCE
COUNTER (COLOR)
COUNTER (COLOR)
Maintenance
counter (Color)
counter (Color)
100K
SIMULATION NO.16
TEST
U2 TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
SIMULATION NO.17
TEST
PF TROUBLE CANCELLATION
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
A ; 300
MAINTENANCE COUNTER
TOTAL)
B ; 100
MAINTENANCE COUNTER
COLOR)
A:
SIMULATION NO.21-01
MAINTENANCE CYCLE SETUP
300
0
999
OK
TEST
CLOSE
MX-7000N SIMULATION 7 – 23
22
22-1
Purpose
Adjustment/Setting/Operation data output/
Check
Check
Function (Purpose) Used to check the print count value in each
section and operation mode. (Used to
check the maintenance timing.)
check the maintenance timing.)
Section
Operation/Procedure
Select a display with [
Select a display with [
↑] and [↓] keys on the touch panel.
Press [COLOR] or [BLACK & WHITE] key to print.
22-2
Purpose
Adjustment/Setting/Operation data check
Function (Purpose) Used to check the total numbers of misfeed
and troubles. (When the number of total
jam is considerably great, it is judged as
necessary for repair.)
jam is considerably great, it is judged as
necessary for repair.)
Section
Operation/Procedure
The paper jam, trouble counter value is displayed.
Press [COLOR] or [BLACK & WHITE] key to print.
The paper jam, trouble counter value is displayed.
Press [COLOR] or [BLACK & WHITE] key to print.
22-3
Purpose
Adjustment/Setting/Operation data check
Function (Purpose) Used to check the misfeed positions and
the number of misfeed at each position.
* The trouble position can be trouble-
shooted according to this data.
* The trouble position can be trouble-
shooted according to this data.
Section
Operation/Procedure
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
Press [COLOR] or [BLACK & WHITE] key to print.
* For the list of the jam codes, refer to "2. Paper jam codes" in [12]
The paper jam and misfeed history is displayed from the latest one
up to 50 items. (The old ones are deleted sequentially.)
Press [COLOR] or [BLACK & WHITE] key to print.
* For the list of the jam codes, refer to "2. Paper jam codes" in [12]
OTTERS.
TOTAL OUT(BW)
Total output quantity of black and white
TOTAL OUT(COL)
Total output quantity of color
TOTAL(BW)
Total use quantity of black and white
TOTAL(COL)
Total use quantity of color
TOTAL(2COL)
Total use quantity of 2-color
TOTAL(SGL_COL)
Total use quantity of single color
COPY(BW)
Black and white copy counter
COPY(COL)
Color copy counter
COPY(2COL)
2-color copy counter
COPY(SGL_COL)
Single color copy counter
PRINT(BW)
Black and white print counter
PRINT(COL)
Color print counter
DOC FIL(BW)
Black and white document filing print counter
DOC FIL(COL)
Color document filing print counter
DOC FIL(2COL)
2-color document filing print counter
DOC FIL(SGL COL)
Single-color document filing print counter
OTHER(BW)
Black and white other counter
OTHER(COL)
Color other counter
MAINTENANCE ALL
Maintenance counter (Total)
MAINTENANCE COL
Maintenance counter (Color)
TC1 BELT
Primary transfer unit print counter
TC1 BELT RANGE
Primary transfer unit accumulated traveling
distance (cm)
distance (cm)
TC1 BELT DAY
Use day of primary transfer unit (Day)
TC2 BELT
Secondary transfer unit print counter
TC2 BELT RANGE
Secondary transfer unit accumulated traveling
distance (cm)
distance (cm)
TC2 BELT DAY
Secondary transfer unit use day (Day)
FUSER UNIT(U)
Fusing unit print counter (Heat roller upper)
FUSER UNIT(E&L)
Fusing unit print counter
(Heat roller external and lower)
(Heat roller external and lower)
FUSER DAY(U)
Fusing unit use day (Heat roller upper)
FUSER DAY(E&L)
Fusing unit use day
(Heat roller external and lower)
(Heat roller external and lower)
FUSER WEB SEND
Fuser web cleaning send counter
FUSER WEB UNIT
Fusing web print counter
FUSER WEB DAY
Use day of fuser web unit (Day)
DRUM LIFE(K)
Accumulated number of drum rotations (K)
DRUM LIFE(C)
Accumulated number of drum rotations (C)
DRUM LIFE(M)
Accumulated number of drum rotations (M)
DRUM LIFE(Y)
Accumulated number of drum rotations (Y)
DEVE LIFE(K)
Accumulated number of developer rotations (K)
DEVE LIFE(C)
Accumulated number of developer rotations (C)
DEVE LIFE(M)
Accumulated number of developer rotations (M)
DEVE LIFE(Y)
Accumulated number of developer rotations (Y)
SIMULATION NO.22-01
TEST
COUNTER DISPLAY
CLOSE
TOTAL OUT (BW)
00000000
:
DOC FIL (COL)
00000000
:
1/2
TOTAL OUT (COL)
00000000
:
DOC FIL (2COL)
00000000
:
TOTAL (BW)
00000000
:
DOC FIL (SGL COL)
00000000
:
TOTAL (COL)
00000000
:
OTHER (BW)
00000000
:
TOTAL (2COL)
00000000
:
OTHER (COL)
00000000
:
TOTAL (SGL_COL)
00000000
:
MAINTENANCE ALL
00000000
:
COPY (BW)
00000000
:
MAINTENANCE COL
00000000
:
COPY (COL)
00000000
:
TC1 BELT
00000000
:
COPY (2COL)
00000000
:
TC1 BELT RANGE
00000000
:
COPY (SGL_COL)
00000000
:
TC1 BELT DAY
000
:
PRINT (BW
00000000
:
TC2 BELT
00000000
:
DOC FIL (BW)
00000000
:
TC2 BELT DAY
000/740
:
PRINT (COL)
00000000
:
TC2 BELT RANGE
00000000
:
MACHINE JAM
SIMULATION NO.22-02
TEST
JAM/TROUBLE COUNTER DISPLAY
CLOSE
00000000
:
DSPF JAM
00000000
:
TROUBLE
00000000
:
1/1
CLOSE
JAM HISTORY DATA DISPLAY
SIMULATION NO.22-03
TEST
1/1
TRAY2
MFT
MFT
CPID2_S2
PPD2_N1
CPFD2_S2
MFT
TRAY3
PPD2_N1
CPFD2_S2
APPD3_S
DPFD2_S4
LCC
PPD2_PRI
CPID2_S2
CPID2_S2
CPFD1_N1
PPD2_PRI
TRAY3
APPD3_S
PPD2_N1
PPD2_N1
MFT
APPD3_S
TRAY2
TRAY3
TRAY3
CPID2_S2
TRAY2
TRAY3
MX-7000N SIMULATION 7 – 24
22-4
Purpose
Adjustment/Setting/Operation data check
Function (Purpose) Used to check the trouble (self diag) his-
tory.
Section
Operation/Procedure
The trouble history is displayed from the latest one up to 30 items.
(The old ones are deleted sequentially.)
Press [COLOR] or [BLACK & WHITE] key to print.
* For the list of the trouble codes, refer to "2. Trouble code list" in
The trouble history is displayed from the latest one up to 30 items.
(The old ones are deleted sequentially.)
Press [COLOR] or [BLACK & WHITE] key to print.
* For the list of the trouble codes, refer to "2. Trouble code list" in
[8] SELF DIAGNOSTICS AND TROUBLE CODES.
22-5
Purpose
Other
Function (Purpose) Used to check the ROM version of each
unit (section).
Section
Operation/Procedure
The ROM version of the installed unit in each section is displayed.
When there is any trouble in the software, use this simulation to
check the ROM version, and upgrade the version if necessary.
Press [COLOR] or [BLACK & WHITE] key to print.
The ROM version of the installed unit in each section is displayed.
When there is any trouble in the software, use this simulation to
check the ROM version, and upgrade the version if necessary.
Press [COLOR] or [BLACK & WHITE] key to print.
22-6
Purpose
Adjustment/Setting/Operation data check
Function (Purpose) Used to output the list of the setting and
adjustment data (simulations, FAX soft
switch, counters).
switch, counters).
Section
Operation/Procedure
* When installing or servicing, this simulation is executed to print
* When installing or servicing, this simulation is executed to print
the adjustment data and set data for use in the next servicing.
(Memory trouble, PWB replacement, etc.)
(Memory trouble, PWB replacement, etc.)
1)
Select the print mode with 10-key.
1. List print
1. List print
2. Lit print (Sim 50-24)
2)
Press [EXECUTE] key to start printing the list selected in step
1.
1.
22-8
Purpose
Adjustment/Setting/Operation data check
Function (Purpose) Used to check the counter value of the fin-
isher, the DSPF, and the scan (reading).
Section
Operation/Procedure
The counter values of the finisher, the DSPF, and the scanner
related counters are displayed.
Press [COLOR] or [BLACK & WHITE] key to print.
The counter values of the finisher, the DSPF, and the scanner
related counters are displayed.
Press [COLOR] or [BLACK & WHITE] key to print.
S/N
Serial No.
ICU(MAIN)
ICU (Main section)
ICU(BOOT)
ICU (Boot section)
LANGUAGE
Language support data version
GRAPHIC
Graphic data for LCD
IMG DATA ROM
ImageASIC FlashROM data
COLOR PROFILE
Color profile
PCU
PCU
SCU
SCU
SPF
SPF
FAX(MAIN)
FAX (main section)
LCC
Side LCC
FINISHER
Finisher
SADDLE
Saddle unit
PUNCH
Punch unit
INSERTER
Inserter
NIC
NIC
FIERY
FIERY option
POWER-CON Power
controller
E-MANUAL
Operation manual (HDD storage)
CLOSE
TROUBLE CODE DATA DISPLAY
SIMULATION NO.22-04
TEST
1/1
L4-31
L8-02
L8-02
L4-02
E7-23
F9-20
F2-39
L4-31
F1-50
L4-02
F2-39
F1-50
F1-50
L4-02
F1-61
F1-50
F1-50
F2-39
H5-01
PF-00
U5-12
F2-39
L1-00
F9-20
PF-00
PC-
F2-81
E7-23
U2-22
F2-39
DSPF
Document feed quantity
SCAN
Number of scans
STAPLER
Staple counter
PUNCHER
Puncher counter
STAMP
Stamp counter
SADDLE STAPLER
Saddle staple counter
OC_OPEN
OC open/close counter
DSPF_OPEN
DSPF open/close counter
INSERTER
Inserter counter
INSERTER OFFLINE
Inserter offline counter
OC LAMP TIME
Overall lighting time of the lamp in the OC section
(Hour, minute)
(Hour, minute)
DSPF LAMP TIME
Overall lighting time of the lamp in the DSPF
section (Hour, minute)
section (Hour, minute)
SIMULATION NO.22-05
TEST
S/N : **********
CLOSE
ICU(MAIN)
00.00.00
:
SADDLE
00.00.00
:
FINISHER
00.00.00
:
1/1
ICU(BOOT)
00.00.00
:
PUNCH
00.00.00
:
LANGUAGE
00.00.00
:
INSERTER
00.00.00
:
GRAPHIC
00.00.00
:
NIC
00.00.00
:
IMG DATA ROM
00.00.00
:
FIERY
00.00.00
:
COLOR PROFILE : 00.00.00
POWER-CON
00.00.00
:
PCU
00.00.00
:
E-MANUAL
00.00.00
:
SCU
00.00.00
:
SPF
NONE
:
FAX(MAIN)
NONE
:
LCC
00.00.00
:
A :
1
;
DATA PATTERN
A:
SIMULATION NO.22-06
DATA PRINT MODE
1
1
2
OK
TEST
CLOSE
EXECUTE
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man46) service manuals if exist.