Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual ▷ View online
MX-7000N SIMULATION 7 – 37
27
27-1
Purpose
Setting
Function (Purpose) Used to set non-detection of communica-
tion error (U7-00) with RIC
Section
Operation/Procedure
1)
1)
Enter the adjustment value with 10-key.
0: Non-detection
0: Non-detection
1: Detection
2)
Press [OK] key.
The set value in step 1 is saved.
The set value in step 1 is saved.
27-2
Purpose
Setting
Function (Purpose) Used to set the FSS function (sender regis-
tration number, host server telephone num-
ber).
ber).
Section
Operation/Procedure
1)
1)
Select an item to be set with touch panel.
[USER FAX NO] [SERVA TEL NO]
[USER FAX NO] [SERVA TEL NO]
2)
Enter the adjustment value with 10-key.
3)
Press [SET] key.
The set value in step 2 is saved.
The set value in step 2 is saved.
27-4
Purpose
Setting
Function (Purpose) Used to set the FSS function (initial, call,
toner order automatic send).
Section
Operation/Procedure
1)
1)
Select an item to be set with [
↑] and [↓] keys.
2)
Enter the adjustment value with 10-key.
3)
Press [OK] key.
The set value in step 2 is saved.
The set value in step 2 is saved.
27-5
Purpose
Setting
Function (Purpose) Used to set the machine tag No. (This func-
tion allows the host computer to check the
machine tag No.)
machine tag No.)
Section
Communication (RIC/MODEM)
Operation/Procedure
1)
1)
Enter the set value (max. 8 digits) with 10-key. The set value is
displayed in NEW.
displayed in NEW.
2)
Press [SET] key.
The set value in step 1 is saved.
The set value in step 1 is saved.
USER FAX_NO.
Sender registration number (Max. 16 digits)
SERVA TEL_NO.
Host server telephone number (Max. 16 digits)
A : 0
; DISABLE : YES
A:
SIMULATION NO.27-01
DISABLING OF U7-00 TROUBLE
0
0
1
OK
TEST
CLOSE
USER FAX_NO.
SERVA TEL_NO.
SIMULATION NO.27-02
TEST
FSS FUNCTION SETUP (INPUT)
1/1
0000000000000001
:
:
PRESENT
NEW
SET
CLOSE
PAUSE
A
FSS MODE
0:
Exclusive for send in the NE-B mode
1:
For send and receive in the NE-F
mode (Default)
mode (Default)
B
RETRY
0 - 15 :
Resend number (2: default)
C
TIMER (MINUTE)
1 - 15 :
Resend timer (min) (3: default)
D
TONER ORDER
TIMING (K)
Toner order automatic
send time (K)
TIMING (K)
Toner order automatic
send time (K)
5:
100% - 75%
4:
74% - 50%
3:
49% - 25% (Default)
2:
25% or less
1:
Near end
0:
Empty
E
TONER ORDER
TIMING (C)
Toner order automatic
send time (C)
TIMING (C)
Toner order automatic
send time (C)
5:
100% - 75%
4:
74% - 50%
3:
49% - 25% (Default)
2:
25% or less
1:
Near end
0:
Empty
F
TONER ORDER
TIMING (M)
Toner order automatic
send time (K)
TIMING (M)
Toner order automatic
send time (K)
5:
100% - 75%
4:
74% - 50%
3:
49% - 25% (Default)
2:
25% or less
1:
Near end
0:
Empty
G
TONER ORDER
TIMING (Y)
Toner order automatic
send time (K)
TIMING (Y)
Toner order automatic
send time (K)
5:
100% - 75%
4:
74% - 50%
3:
49% - 25% (Default)
2:
25% or less
1:
Near end
0:
Empty
A : 1
;
FSS MODE: NEB2
B : 2
;
RETRY
C : 3
;
TIMER (MINUTE)
D : 3
;
TONER ORDER TIMING (K): 3 (49% - 25%)
A:
SIMULATION NO.27-04
FSS FUNCTION SETUP
1
0
3
OK
TEST
CLOSE
E : 3
;
TONER ORDER TIMING (C): 3 (49% - 25%)
F : 3
;
TONER ORDER TIMING (M): 3 (49% - 25%)
G : 3
;
TONER ORDER TIMING (Y): 3 (49% - 25%)
SIMULATION NO.27-05
TEST
TAG# SETTING
11111111
PRESENT :
NEW :
CLOSE
MX-7000N SIMULATION 7 – 38
27-6
Purpose
Setting
Function (Purpose) Used to set the FSS function (manual ser-
vice call).
Section
Operation/Procedure
1)
1)
Enter the adjustment value with 10-key.
0: YES (Default)
0: YES (Default)
1: NO
2)
Press [OK] key.
The set value in step 1 is saved.
The set value in step 1 is saved.
27-7
Purpose
Setting
Function (Purpose) Used to set the FSS function (enable, alert
call).
Section
Operation/Procedure
1)
1)
Select an item to be set with [
↑] and [↓] keys.
2)
Enter the adjustment value with 10-key.
3)
Press [OK] key.
The set value in step 2 is saved.
The set value in step 2 is saved.
*1: The FSS function setting can be changed only from Disable to
Enable. (Cannot be changed from Enable to Disable.)
*2: Alert send timing
27-9
Purpose
Setting
Function (Purpose) Paper transport time between sensors /
Gain adjustment retry number setting
Section
Operation/Procedure
1)
1)
Select an item to be set with [
↑] and [↓] keys.
2)
Enter the adjustment value with 10-key.
3)
Press [OK] key.
The set value in step 2 is saved.
The set value in step 2 is saved.
27-10
Purpose
Data clear
Function (Purpose) Used to clear the history information of
trouble prediction
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The history information of trouble prediction is cleared.
The history information of trouble prediction is cleared.
A
FUNCTION
0: FSS function enable
1: FSS function disable (*1) (Default)
1: FSS function disable (*1) (Default)
B
ALERT
0: Alert call enable (*2) (Default)
1: Alert call disable
1: Alert call disable
No alert cause
Initial state / Trouble / Continuous JAM alert
Maintenance
When the maintenance timing is reached.
Service call
When pressing Service call.
Toner send request
When the toner order automatic send setting is
reached.
reached.
Toner collection
request
request
Revision of the toner installation date (only for a
new product)
new product)
A : 0
;
0:YES, 1:NO
A:
SIMULATION NO.27-06
MANUAL SERVICE CALL SETUP
0
0
1
OK
TEST
CLOSE
A : 1
;
FUNCTION(0:YES 1:NO)
B : 0
;
ALERT(0:YES 1:NO)
A:
SIMULATION NO.27-07
FSS FUNCTION SETUP (FUNCTION)
1
0
1
OK
TEST
CLOSE
A
FEED TIME 1
0 - 100:
Threshold value of the paper
transport time between sensors
(Main unit) (50: Default)
transport time between sensors
(Main unit) (50: Default)
B
FEED TIME 2
0 - 100:
Threshold value of the paper
transport time between sensors
(DSPF) (50: Default)
transport time between sensors
(DSPF) (50: Default)
C
GAIN ADJUSTMENT
RETRY
RETRY
1 - 100:
Threshold value of the gain
adjustment retry number (50:
Default)
adjustment retry number (50:
Default)
D
JAM ALERT
1 - 100:
Threshold value of the continuous
JAM alert judgment (10: Default)
JAM alert judgment (10: Default)
Target history
Serial communication retry number history
High density process control error history
Medium density process control error history
Automatic registration adjustment error history
Gain adjustment retry history
Paper transport time between sensors
High density process control error history
Medium density process control error history
Automatic registration adjustment error history
Gain adjustment retry history
Paper transport time between sensors
A : 50
; FEED TIME1
B : 50
; FEED TIME2
C : 50
; GAIN ADJUSTMENT RETRY
D : 10
; JAM ALERT
A:
SIMULATION NO.27-09
FSS FUNCTION ADJUSTMENT
50
0
100
OK
TEST
CLOSE
SIMULATION NO.27-10
TEST
TROUBLE PRECOGNITION HISTORY CLEAR
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
MX-7000N SIMULATION 7 – 39
27-11
Purpose
Other
Function (Purpose) Used to check the serial communication
retry number history and the scanner gain
adjustment retry number history.
adjustment retry number history.
Section
Operation/Procedure
The serial communication retry number history and the scanner
gain adjustment retry number history are displayed.
The serial communication retry number history and the scanner
gain adjustment retry number history are displayed.
27-12
Purpose
Other
Function (Purpose) Used to check the error history of high den-
sity, half tone process control, and auto-
matic registration adjustment.
matic registration adjustment.
Section
Operation/Procedure
The high density error history, the half tone error history, and the
automatic registration adjustment error history are displayed.
The high density error history, the half tone error history, and the
automatic registration adjustment error history are displayed.
27-13
Purpose
Other
Function (Purpose) Used to check the history of paper transport
time between sensors.
Section
Operation/Procedure
Select the display with [
Select the display with [
↑] and [↓] keys.
Serial communication retry number
history display
history display
LSU1
LSU2
DESK1
DESK2
INSERTER1
INSERTER2
FINISHER1
FINISHER2
DSPF1
DSPF2
LSU2
DESK1
DESK2
INSERTER1
INSERTER2
FINISHER1
FINISHER2
DSPF1
DSPF2
Scanner gain adjustment retry history
display
display
SCAN GAIN ADJ1
SCAN GAIN ADJ2
SCAN GAIN ADJ3
SCAN GAIN ADJ4
SCAN GAIN ADJ5
SCAN GAIN ADJ2
SCAN GAIN ADJ3
SCAN GAIN ADJ4
SCAN GAIN ADJ5
DSPF gain adjustment retry history
display
display
DSPF GAIN ADJ1
DSPF GAIN ADJ2
DSPF GAIN ADJ3
DSPF GAIN ADJ4
DSPF GAIN ADJ5
DSPF GAIN ADJ2
DSPF GAIN ADJ3
DSPF GAIN ADJ4
DSPF GAIN ADJ5
HV_ERR1
High density error history 1
HV_ERR2
High density error history 2
HV_ERR3
High density error history 3
HV_ERR4
High density error history 4
HV_ERR5
High density error history 5
H_TONE ERR1
Half tone error history 1
H_TONE ERR2
Half tone error history 2
H_TONE ERR3
Half tone error history 3
H_TONE ERR4
Half tone error history 4
H_TONE ERR5
Half tone error history 5
SIMULATION NO.27-11
TEST
TROUBLE PRECOGNITION RESULT
CLOSE
DATE
RETRY
LSU1
: 99/99/99 99:99:99
99999999
LSU2
: 99/99/99 99:99:99
99999999
DESK1
: 99/99/99 99:99:99
99999999
DESK2
: 99/99/99 99:99:99
99999999
INSERTER1
: 99/99/99 99:99:99
99999999
INSERTER2
: 99/99/99 99:99:99
99999999
FINISHER1
: 99/99/99 99:99:99
99999999
FINISHER2
: 99/99/99 99:99:99
99999999
DSPF1
: 99/99/99 99:99:99
99999999
DESK2
: 99/99/99 99:99:99
99999999
SCAN GAIN ADJ1 : 99/99/99 99:99:99
99999999
SCAN GAIN ADJ2 : 99/99/99 99:99:99
99999999
SCAN GAIN ADJ3 : 99/99/99 99:99:99
99999999
SCAN GAIN ADJ4 : 99/99/99 99:99:99
99999999
SCAN GAIN ADJ5 : 99/99/99 99:99:99
99999999
DSPF GAIN ADJ1 : 99/99/99 99:99:99
99999999
DSPF GAIN ADJ2 : 99/99/99 99:99:99
99999999
1/2
AUTO REG ADJ1
Automatic registration adjustment error history 1
AUTO REG ADJ2
Automatic registration adjustment error history 2
AUTO REG ADJ3
Automatic registration adjustment error history 3
AUTO REG ADJ4
Automatic registration adjustment error history 4
AUTO REG ADJ5
Automatic registration adjustment error history 5
FEED TIME1
History 1 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME2
History 2 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME3
History 3 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME4
History 4 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME5
History 5 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME6
History 6 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME7
History 7 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME8
History 8 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME9
History 9 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME10
History 10 of paper transport time between
sensors (ms)
sensors (ms)
FEED TIME1(DSPF)
History 1 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME2(DSPF)
History 2 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME3(DSPF)
History 3 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME4(DSPF)
History 4 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME5(DSPF)
History 5 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME6(DSPF)
History 6 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME7(DSPF)
History 7 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME8(DSPF)
History 8 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME9(DSPF)
History 9 of paper transport time between DSPF
sensors (ms)
sensors (ms)
FEED TIME10(DSPF)
History 10 of paper transport time between DSPF
sensors (ms)
sensors (ms)
SIMULATION NO.27-12
TEST
TROUBLE PRECOGNITION RESULT(ADJUSTMENT_ERROR)
CLOSE
DATE
ERROR CODE
1/1
HV_ERR1
: 99/99/99 99:99:99
9999
HV_ERR2
: 99/99/99 99:99:99
9999
HV_ERR3
: 99/99/99 99:99:99
9999
HV_ERR4
: 99/99/99 99:99:99
9999
HV_ERR5
: 99/99/99 99:99:99
9999
H_TONE ERR1
: 99/99/99 99:99:99
9999
H_TONE ERR2
: 99/99/99 99:99:99
9999
H_TONE ERR3
: 99/99/99 99:99:99
9999
H_TONE ERR4
: 99/99/99 99:99:99
9999
H_TONE ERR5
: 99/99/99 99:99:99
9999
AUTO REG ADJ1 : 99/99/99 99:99:99
9999
AUTO REG ADJ2 : 99/99/99 99:99:99
9999
AUTO REG ADJ3 : 99/99/99 99:99:99
9999
AUTO REG ADJ4 : 99/99/99 99:99:99
9999
AUTO REG ADJ5 : 99/99/99 99:99:99
9999
MX-7000N SIMULATION 7 – 40
<Cord between sensors>
* Sensor A and sensor B On
→ On : Possibly caused by slip in
paper transport.
Off
Off
→ Off: The sensor actuator response trouble can be
detected.
27-14
Purpose
Setting
Function (Purpose) Used to set the FSS function connection
mode. (Only "Disable
→ Enable" is
allowed.)
Section
Operation/Procedure
1)
1)
Enter the adjustment value with 10-key.
0: Disable (Default)
0: Disable (Default)
1: Enable
2)
Press [OK] key.
The set value in step 1 is saved.
The set value in step 1 is saved.
30
30-1
Purpose
Operation test/Check
Function (Purpose) Used to check the operations of the sen-
sors and the detectors in other than the
paper feed section and the control circuits.
paper feed section and the control circuits.
Section
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
Sensors and detectors which are turned on are highlighted.
The operating conditions of the sensors and detectors are dis-
played.
Sensors and detectors which are turned on are highlighted.
Sensors A
Sensors B
Status
Cord between sensors
Bk
Color
Heavy
paper
PPD1
PPD2
On
→ On
0
40
80
Off
→ Off
1
41
81
PPD2
POD1
On
→ On
2
42
82
Off
→ Off
3
43
83
POD1
POD2
On
→ On
4
44
84
Off
→ Off
5
45
85
POM
reverse
rotation
reverse
rotation
POD3
On
→ On
6
46
86
APPD1
APPD2
On
→ On
0E
4E
8E
Off
→ Off
0F
4F
8F
APPD2
PPD1
On
→ On
10
50
90
Off
→ Off
11
51
91
CPUC1
CPFD1
On
→ On
12
52
92
CPFD1
PPD1
On
→ On
14
54
94
Off
→ Off
15
55
95
CPUC2
CPFD2
On
→ On
16
56
96
CPFD2
CPFD1
On
→ On
18
58
98
Off
→ Off
19
59
99
MPUC
PPD1
On
→ On
1A
5A
9A
SPPD2
SPPD3
On
→ On
C4
Off
→ Off
C5
SPPD3
SPPD4
On
→ On
C6
Off
→ Off
C7
SPPD4
SPPD5
On
→ On
C8
Off
→ Off
C9
SPPD5
SPOD
On
→ On
CA
Off
→ Off
CB
SIMULATION NO.27-13
TEST
TROUBLE PRECOGNITION RESULT(FEED TIME)
CLOSE
DATE
SENSOR CODE PASS TIME STANDARD TIME
F
EED TIME1
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME2
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME3
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME4
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME5
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME6
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME7
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME8
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME9
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME10
: 99/99/99 99:99:99
99999
99999
99999
FEED TIME1(SPF) : 99/99/99 99:99:99
99999
99999
99999
FEED TIME2(SPF) : 99/99/99 99:99:99
99999
99999
99999
FEED TIME3(SPF) : 99/99/99 99:99:99
99999
99999
99999
FEED TIME4(SPF) : 99/99/99 99:99:99
99999
99999
99999
FEED TIME5(SPF) : 99/99/99 99:99:99
99999
99999
99999
FEED TIME6(SPF) : 99/99/99 99:99:99
99999
99999
99999
FEED TIME7(SPF) : 99/99/99 99:99:99
99999
99999
99999
1/2
PPD1
Registration pre-detection
PPD2
Registration detection
POD1
Fusing after-detection
POD2
Main unit paper exit detection
POD3
Right tray paper exit detection
TFD
Main unit paper exit full detection
TFD_R
Right tray paper exit full detection
DSW_R
Right door open/close detection
DSW_D
Front cover open/close detection D
DSW_FU
Front cover open/close detection U
DSW_FL
Front cover open/close detection L
VTOD
Vertical transport path open/close detection
DHPD_K
K phase detection
DHPD_C
C phase detection
DHPD_M
M phase detection
DHPD_Y
Y phase detection
TNFD
Waste toner full detection
TBBOX
Waste toner installation detection
CCHP
Charger cleaner HP detection
CCM_ROT
Charger cleaner rotation detection
LPPD
LCC transport sensor
T2PPD
Tray 2 transport detection
T1PPD1
Tray 1 transport detection 1
T1PPD2
Tray 1 transport detection 2
FUEXD
Fusing external variation sensor
WEB_INL
Fusing web initial detection
WEB_END
Fusing web end detection
PTCM_HP
PTC cleaner HP detection
TBLTC
Transfer belt separation sensor CL
TBLTB
Transfer belt separation sensor BK
THPS
Secondary transfer separation home position sensor 1
A:
A : 0
;
CONNECTION TEST MODE(1:ON 0:OFF)
SIMULATION NO.27-14
FSS TEST MODE SETUP
0
0
1
OK
TEST
CLOSE
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man46) service manuals if exist.