DOWNLOAD Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual ↓ Size: 3.61 MB | Pages: 127 in PDF or view online for FREE

MX-7000N  SIMULATION  7 – 5

26

35

Used to set the display mode of SIM 22-4 trouble history when a same 
trouble occurred repeatedly. There are two display modes: display as one 
trouble and display as several series of troubles. 

Setting

38

Used to set whether printing is continued or stopped when the developer life 
is expired or when the fusing wed ends. 

Setting

41

Used to set Enable/Disable of the magnification ratio automatic select 
function (AMS) in the center binding mode. 

Setting

49

Used to set the copy speed mode of postcards. 

Setting

50

Used to set Enable/Disable of the black and white highlight function and the 
2-color/Single display function. 

Setting

52

Used to set whether non-print paper (insertion paper, cover, etc.) is counted 
or not.

Setting

53

Used to set YES/NO of the auto color calibration.

Setting

54

Used to set the printer calibration YES/NO.

Setting

65

Used to set the finisher alarm mode.

Setting

67

Used to set the summer time timing and the time zone. 

Setting

69

Used to set the display of spare toner preparation and near end when the 
toner quantity reaches 25%. 

Setting

27

1

Used to set non-detection of communication error (U7-00) with RIC

Setting

2

Used to set the FSS function (sender registration number, host server 
telephone number).

Setting

4

Used to set the FSS function (initial, call, toner order automatic send).

Setting

5

Used to set the machine tag No. (This function allows the host computer to 
check the machine tag No.)

Setting

Communication (RIC/
MODEM)

6

Used to set the FSS function (manual service call).

Setting

7

Used to set the FSS function (enable, alert call).

Setting

9

Paper transport time between sensors / Gain adjustment retry number 
setting

Setting

10

Used to clear the history information of trouble prediction

Data clear

11

Used to check the serial communication retry number history and the 
scanner gain adjustment retry number history.

Other

12

Used to check the error history of high density, half tone process control, 
and automatic registration adjustment.

Other

13

Used to check the history of paper transport time between sensors.

Other

14

Used to set the FSS function connection mode. (Only "Disable 

→ Enable" is 

allowed.)

Setting

30

1

Used to check the operations of the sensors and the detectors in other than 
the paper feed section and the control circuits. 

Operation test/Check

2

Used to check the operations of the sensors and the detectors in the paper 
feed section and the control circuits. 

Operation test/Check

33

1

Used to check the operations of the card reader sensor and the control 
circuit.

Operation test/Check

40

2

Manual paper feed tray paper width detector detection level adjustment

Adjustment/Setting

Paper feed

7

Used to adjust the manual paper feed tray width detection level. 

Adjustment/Setting

Paper feed

12

Used to perform the tray 3 paper width detection level adjustment.

Adjustment/Setting

Paper feed

41

1

Used to check the operations of the document size sensor and the control 
circuit. 

Operation test/Check

2

Used to adjust the document size sensor detection level.

Adjustment

3

Used to check the operations of the document size sensor and the control 
circuit. 

Operation test/Check

43

1

Used to set the fusing temperature in each mode. 

Setting

4

Used to perform the fusing temperature setup 2 in each operation mode. 
(Continued from SIM 43-1.)

Setting

20

Used to set the environmental correction under low temperature and low 
humidity (L/L) for the fusing temperature setting in each mode (SIM 43-1).

Adjustment/Setting

21

Used to set the environment correction under high temperature and high 
humidity (H/H) for the fusing temperature setting (SIM 43-1) in each paper 
mode.

Adjustment/Setting

22

Used to set the environment correction under low temperature and low 
humidity (L/L) for the fusing temperature setting (SIM 43-4) in each paper 
mode.

Adjustment/Setting

23

Used to set the environment correction under high temperature and high 
humidity (H/H) for the fusing temperature setting (SIM 43-4) in each paper 
mode.

Adjustment/Setting

24

Used to set the correction of the temperature adjustment value of SIM 43-1 
and 43-4. 

Adjustment/Setting

31

Used to check the operation of the fusing web cleaning motor and the 
control circuit.

Operation test/Check

32

Used to set the compulsory operation of fusing web cleaning at job end. 

Adjustment/Setting

MX-7000N  SIMULATION  7 – 6

44

1

Used to set each correction operation function in the image forming 
(process) section.

Setting

Process (Photoconductor/
Developing/Transfer/
Cleaning)

2

Image density sensor gain adjustment

Adjustment/Setting

Process

4

Used to set the target density level in the image density correction. 

(Do not use this function unless 
specially required.)

6

Used to execute the high density process correction compulsorily.

Adjustment

9

Used to check data of correction results in the image forming section.

(Do not use in the market.)

Process (Photoconductor/
Developing/Transfer/
Cleaning)

12

Used to check the sampling toner image patch density data in the image 
density correction.

(Do not use in the market.)

Image process 
(Photoconductor/
Developing)

13

Used to adjust the color image sensor. 

Adjustment/Setting

14

Used to check the output level of the temperature/humidity sensor. 

Adjustment, setting, operation data 
check

Image process 
(Photoconductor/
Developing)

16

Used to check the toner density control data.

(Do not use in the market.)

21

Used to set the half tone process control.

Adjustment/Setting

Process

22

Used to check the toner patch image density level of each color in half tone 
image forming section correction (process correction). 

(Do not use in the market.)

24

Used to display the process control result. 

(Do not use in the market.)

25

Used to set the initial conditions of the process control half tone correction. 

(Do not use in the market.)

26

Used to execute the half tone process control compulsorily.

Adjustment/Setting

Process

27

Used to clear the half tone process correction value. 

Data clear

28

Used to set the process control execution timing.

Adjustment/Setting

29

Used to select the half tone correction during a job. 

(Do not use in the market.)

31

Used to adjust the phase of the photoconductor.

Adjustment/Setting

Process

37

Used to perform the image density correction setting. 

Adjustment/Setting

43

Used to check installation of the developing unit and the current state.

(Do not use in the market.)

52

Used to check the image density level of each color toner patch in 1-pixel 
half tone correction. 

(This simulation should not be 
executed unless specially required.)

54

The 1-pixel half tone correction result is displayed. 

(This simulation should not be 
executed unless specially required.)

56

The 1-pixel half tone correction is executed compulsorily.

(This simulation should not be 
executed unless specially required.)

57

The 1-pixel half tone correction value is cleared.

(This simulation should not be 
executed unless specially required.)

46

1

Used to adjust the copy density in the copy mode.

Adjustment (Color copy mode)

2

Used to adjust the copy density in the copy mode.

Adjustment (Monochrome copy 
mode)

4

Used to adjust the density in the scanner mode.

Adjustment (Color scanner mode)

5

Used to adjust the density in the scanner mode.

Adjustment (Monochrome scanner 
mode)

8

Used to adjust the scanner color balance RGB.

Adjustment (Color scanner mode)

9

Used to adjust the copy density in the copy mode.

Adjustment (DSPF mode)

10

Used to adjust the engine color balance manually.

Adjustment

16

Used to perform the engine color balance manual adjustment (monochrome, 
all modes).

Adjustment

19

Used to set the monochrome auto exposure mode. 

Setting

21

Used to perform the engine color balance manual adjustment (color, all 
modes).

Adjustment

23

Used to perform the half tone highest density correction. 

Adjustment/Setting

24

Used to perform the engine half tone auto density adjustment.

Adjustment

25

Used to perform the color balance adjustment in the single color mode. 

Adjustment

26

Used to perform the default setting of color balance in the single color mode. 

Adjustment

27

Used to perform the engine/gamma calculation formula coefficient setting. 

Adjustment/Setting

28

Used to check Auto exposure/Document auto recognition/Line number 
recognition (color mode).

(This simulation should not be used 
unless specially required.)

33

Used to perform the color auto mode adjustment. 

Adjustment/Setting

36

2-color (red/black) copy adjustment

Adjustment/Setting

37

Used to perform the black/white image generation adjustment.

Adjustment/Setting

39

Used to perform the image send sharpness adjustment. 

Adjustment/Setting

40

Used to perform the collective adjustment of all the FAX exposure modes. 

Adjustment/Setting

41

Used to perform the FAX exposure adjustment (normal character).

Adjustment/Setting

42

Used to perform the FAX exposure adjustment (small character).

Adjustment/Setting

43

Used to perform the FAX exposure adjustment (fine).

Adjustment/Setting

44

Used to perform the FAX exposure adjustment. (Super fine)

Adjustment/Setting

45

Used to perform the FAX exposure adjustment (600dpi).

Adjustment/Setting

47

Used to perform the JPEG compression rate setting in copying and 
scanning. 

Adjustment/Setting

MX-7000N  SIMULATION  7 – 7

48

1

Used to perform the copy magnification ratio (main scanning, sub scanning 
direction) adjustment. 

Adjustment

5

Used to perform the copy magnification ratio adjustment (sub scanning 
direction). When the sub scanning direction image magnification ratio is 
adjusted with SIM 48-1 and a satisfactory copy image is not obtained when 
copying by specifying a different copy magnification ratio, perform this 
adjustment.

Adjustment

Scanner section

6

Used to perform the rotation speed adjustment of each motor. 

Adjustment

49

1

Used to perform the firmware update. 

3

Used to update the operation manual in the HDD. 

Adjustment

50

1

Used to adjust the copy image position on print paper and the void area 
(image loss) in the copy mode. (The similar adjustment can be performed 
also with SIM 50-5 and SIM 50-2 (simple method). (Document table mode))

2

Used to adjust the copy image position on print paper and the void area 
(image loss) in the copy mode. (The similar adjustment can be performed 
also with SIM 50-1. This simulation. However, is simpler.)

Adjustment

5

Printer print lead edge adjustment

Adjustment

6

Used to adjust the DSPF document lead edge, and to adjust the copy image 
position and the void area (image loss) on the print paper in the copy mode. 
(The similar adjustment can be performed with SIM 50-7 (simple method).) 
(DSPF mode)

Adjustment

DSPF

7

Used to adjust the DSPF document lead edge, and to adjust the copy image 
position and the void area (image loss) on the print paper in the copy mode. 
(The similar adjustment can be performed with SIM 50-7 (simple method).) 
(DSPF mode)

Adjustment

DSPF

10

Used to adjust the print image off-center position. (Adjustment is made 
separately for each paper feed section.)

Adjustment

12

Used to perform the scan image off-center position adjustment. (The 
adjustment is made separately for each scan mode.)

Adjustment

20

Used to perform the main scanning direction manual registration adjustment.

Adjustment

21

Used to perform the sub scanning direction manual registration adjustment. 

Adjustment

22

Used to perform the main/sub scanning auto registration adjustment. 

Adjustment

24

Used to display the auto registration adjustment result (SIM 50-22).

(Do not use in the market.)

27

Used to perform the image loss adjustment of the scanned  image in the 
FAX or scanner mode 

Adjustment

28

Used to perform the OC adjustment, the BK main scanning direction 
magnification ration correction, the DSPF adjustment, and the print position 
adjustment.

Adjustment

51

1

Used to perform the transfer voltage and the separation bias voltage ON/OF 
timing adjustment. 

Adjustment/Setting

2

Used to perform the paper contact pressure adjustment for each section 
resist roller (main unit, each paper feed, duplex paper fed, DSPF paper 
feed). (When there is a considerable fluctuation in the print image position 
on print paper or a paper jam occurs, this adjustment is required.)

Adjustment/Setting

53

6

Used to perform the DSPF size width detection level adjustment. 

Adjustment

7

Used to perform the DSPF size width adjustment value setting.

Adjustment/Setting

8

Used to perform the DSPF document scanning start position adjustment. 

Adjustment

55

1

Used to perform the engine control operation specification setting. 

(Do not use this function unless 
specially required.)

2

Used to perform the scanner control operation specification setting. 

(Do not use this function unless 
specially required.)

3

Used to perform the controller operation specification setting. 

(Do not use this function unless 
specially required.)

56

1

Data transfer (Used in repairing the PWB.)

Backup

2

Used to backup the data (user authentication data, address book, etc.) in the 
EEPROM, the SRAM, and the HDD of the main unit into the USB memory 
and to transfer the data.

Backup

60

1

Used to check the operations (read/write) of the MFP control (SDRAM). 

Operation test/Check

2

Used to set the onboard SDRAM. 

(Do not use in the market.)

61

1

Used to check the polygon motor rotation and the BD signal detection. 

Operation test/Check

LSU

2

Used to set the laser power. (for printer FIERY)

Adjustment/Setting

3

Used to set the laser power. 

Adjustment/Setting

4

Used to perform self printing of the LSU position adjustment pattern. 

Adjustment

62

1

Used to format the hard disk. (Excluding the operation manual area.)

2

Used to check read/write of the hard disk (partial).

Operation test/Check

3

Used to check read/write of the hard disk (all areas).

Operation test/Check

6

Used to perform the self diagnostics of the hard disk. 

Operation test/Check

7

Used to print the hard disk self diagnostics error log. 

Operation test/Check

8

Used to format the hard disk. (Excluding the system area and the operation 
manual area)

10

Used to delete the job log data. 

Data clear

11

Used to delete the document filing data. 

Data clear

12

Used to set Enable/Disable of auto format in a hard disk trouble. 

Setting

13

Used to format the hard disk. (only the operation manual area)

MX-7000N  SIMULATION  7 – 8

63

1

Used to check the shading correction result. 

Adjustment/Setting/Operation data 
check

Scanner

2

Used to perform shading. 

Adjustment

3

Used to perform scanner color balance and color coefficient auto 
adjustment.

Adjustment/Setting

Scanner

5

Used to perform the scanner color balance and the color coefficient auto 
adjustment. 

Adjustment/Setting

6

Used to perform the engine color balance auto adjustment pattern setting. 

Adjustment/Setting

7

Used to perform the auto density setting of the engine auto adjustment 
scanner target value. (Servicing)

Adjustment/Setting

8

Used to perform the initial value reset of the engine auto adjustment scanner 
target value. (Servicing)

Adjustment/Setting

11

Used to set the reference scanner target value for the engine auto density 
adjustment. 

Adjustment/Setting

64

1

Used to perform the self print. (Color mode)

Operation test/Check

2

Used to print the density adjustment pattern. 

Operation test/Check

3

Used to perform self print (monochrome mode).

Operation test/Check

4

Used to perform the printer self print.
* When FIERY is supported, SIM is not displayed.

Operation test/Check

5

Used to perform the printer self print (PCL).
* When FIERY is supported, SIM is not displayed.

Operation test/Check

6

Used to perform the printer self print (PS).
* When FIERY is supported, SIM is not displayed.

Operation test/Check

65

1

Used to perform the touch panel (LCD display) detection position 
adjustment. 

Adjustment

Operation panel section 

2

Used to check the touch panel (LCD display) detection position adjustment 
result. 

Operation check/test

5

Used to check the operation panel key input. 

Operation check/test

66

1

Used to change and check the soft switch setting.

Setting

2

Used to clear the soft switch and set the default value.

Data clear

3

Used to check the operation (read/write) of the FAX PWB memory. 

Operation test, check

FAX

4

Used to check the output operation (MODEM operation) of data signal in 
each data output mode of FAX. Send level: MAX

Operation check, test

FAX

5

Used to check the output operation (MODEM operation) of data signal in 
each data output mode of FAX. Send level: Soft switch setting

Operation test, check

FAX

6

Used to print the confidential pass code.

User data output, check

FAX

7

Used to output the image memory data (memory send and receive).
* The confidential receive contents are also outputted.

User data output, check

FAX

8

Used to check the output operation (audio output IC operation check) of the 
various audio signals of FAX. Send level: MAX

Operation test, check

FAX

9

Used to check the output operation (audio output IC operation) of various 
audio signals of FAX. Send level: Soft switch setting

Operation test, check

FAX

10

Used to clear all the data (memory receive and send) of the image memory.
* The confidential receive data are cleared simultaneously.

Data clear

FAX

11

Used to check the output operation (MODEM operation) in the FAX G3 
mode 300bps. Send level: MAX

Operation test, check

FAX

12

Used to check the output operation (MODEM operation) in the FAX G3 
mode 300bps. Send level: Set with the soft switch.

Operation test, check

FAX

13

Used to set the number for the FAX dial signal output test. (In the dial signal 
output test with SIM66-14 - 16, the dial number set with this simulation is 
outputted.)

Setting

FAX

14

Used to set the make time in the FAX pulse dial mode (10PPS) and to 
execute the dial signal output test. (The signal of the dial number set with 
SIM66-13 is outputted.)

Setting/Operation test, check

FAX

15

Used to set the make time in the FAX pulse dial mode (20PPS) and to 
execute the dial signal output test. (The signal of the dial number set with 
SIM 66-13  is outputted.)

Setting/Operation test, check

FAX

16

Used to perform the dial signal (DTMF) output test in the FAX tone dial 
mode. (The signal of the dial number set with SIM 66-13 is outputted.) 
The send level can be set to an optional level.

Setting/Operation test, check

FAX

17

Used to perform the dial signal (DTMF) output test in the FAX tone dial 
mode. Send level: MAX

Operation test, check

FAX

18

Used to perform the dial signal (DTMF) output test in the FAX tone dial 
mode. Send level: Set with the soft switch.

Operation test, check

FAX

19

Used to backup the address book data stored in the HDD. (Backup to the 
Flash ROM)

Backup

20

Used to transfer the address book data stored in the Flash ROM. (Transfer 
to HDD)

Data transfer

21

Used to print information abut FAX (various registrations, communication 
management, file management, system errors, protocols).

Adjustment, setting, operation data 
check

FAX

24

Used to clear the FAST memory data.

Clear

FAX

25

Used to register a FAX number for MODEM dial-in.

Setting

FAX

26

Used to register an external telephone number for MODEM dial-in.

Setting

FAX