DOWNLOAD Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) Service Manual ↓ Size: 1.88 MB | Pages: 127 in PDF or view online for FREE

MX-4101N  SIMULATION  6 – 37

 

26-74

Setting

Function (Purpose) Used to set the OSA trial mode.
Section

Operation/Procedure
1)

Enter the set value with 10-key.

2)

Press [OK] key.

 

26-78

Setting

Function (Purpose) Used to set the password of the remote

operation panel.

Operation/Procedure
1)

Enter a password with 10 key. (5 - 8 digits)
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.

2)

Press [SET] key.

 

 

27-1

Setting

Function (Purpose) Used to set non-detection of communica-

tion error (U7-00) with RIC. (FSS function)

Operation/Procedure
1)

Enter the set value with 10-key.

2)

Press [OK] key.
The set value in step 1) is saved.

 

27-2

Setting

Function (Purpose) Used to set the sender's registration num-

ber and the HOST server telephone num-
ber. (FSS function)

Operation/Procedure
1)

Select an item to be set with touch panel. 
[USER FAX NO] [SERVA TEL NO]

2)

Enter the set value with 10-key.

3)

Press [SET] key.
The set value in step 2) is saved.

A

DELETING 
SHADOW ADJ 
(M)

Rear frame side 
image loss quantity 
(shade delete 
quantity) adjustment

0 - 50

0 

(Adjustment 

amount: 

0.1mm/step)

B

DELETING 
SHADOW ADJ 
(S)

Lead edge image 
loss quantity (shade 
delete quantity) 
adjustment

0 - 50

0 

(Adjustment 

amount: 

0.1mm/step)

A

OSA TRIAL 
MODE 
(0 : YES  1 : NO)

0

Used to set the 
OSA trial mode.

0 - 1

1

1

OSA trial mode is 
canceled.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

'(/(7,1*6+$'2:$'-8670(17

$˖

˷̚˹

˖'(/(7,1*6+$'2:$'-0

$˖

˖'(/(7,1*6+$'2:$'-6

%˖

2.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

26$75$,$/02'(6(77,1*

$˖

˷̚˹

˖26$75,$/02'(˄<(6˖12˅

$˖

2.

0

Not detection

1

Detection

USER 
FAX_NO.

Sender registration number (Max. 16 digits)

SERVA 
TEL_NO.

Host server telephone number (Max. 16 digits)
• If the connection process is not completed normally 

when registering the FSS, calling to the HOST may 
be continuously made every time when the power is 
turned ON (from OFF) or rebooted.
In this case, enter "********" to inhibit calling to the 
HOST.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

523(3$66:25'6(77,1*

35(6(17˖
ǂǂ1(:˖

6(7

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

',6$%/,1*2)87528%/(

$˖

˷̚˹

˖',6$%/(<(6

$˖

2.

MX-4101N  SIMULATION  6 – 38

 

27-4

Setting

Function (Purpose) Used to set the initial call and toner order

auto send. (FSS function)

Operation/Procedure
1)

Select an item to be set with [

↑] [↓] keys.

2)

Enter the set value with 10-key.

3)

Press [OK] key.
The set value in step 2) is saved.

 

27-5

Setting

Function (Purpose) Used to set the machine tag No. (This func-

tion allows the host computer to check the
machine tag No.) (FSS function)

Communication (RIC/MODEM)

Operation/Procedure
1)

Enter the password (max. 8 digits) with 10-key.
The entered password is displayed on the column of "NEW”.
In order to correct the entered password, press the [clear] key
to delete the entered value one digit by one digit.

2)

Press [SET] key.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

)66)81&7,216(783,1387

35(6(17˖
ǂǂ1(:˖

6(7

86(5)$;B12

6(59$7(/B12

3$86(

A

FSS MODE

NEB1

Set the FSS MODE

Exclusive for 
send in NE-B 
mode

0 - 3

0

1

NEB2

Send/Receive 
in NE-B mode

1

NFB1

Exclusive for 
send in NE-F 
mode

2

NFB2

Send/Receive 
in NE-F mode

3

B

RETRY_BUSY

Resend number setting when busy

0 - 15

2

* 0: No retry

C

TIMER (MINUTE) _BUSY

Resend timer setting (minute) when 
busy

1 - 15

3

D

RETRY_ERROR

Resend number setting when error

0 - 15

1

* 0: No retry

E

TIMER (MINUTE) _ERROR

Resend timer setting (minute) when 
error

1 - 15

1

F

TONER ORDER 
TIMING (K)

100% - 75%

Toner order auto send 
timing setting (K)

100% - 75%

0 - 5

5

3 (49%-25%)

74% - 50%

74% - 50%

4

49% - 25%

49% - 25%

3

LOWER 25

25% or less

2

NEAREND

NEAREND

1

EMPTY

EMPTY

0

G

TONER ORDER 
TIMING (C)

100% - 75%

Toner order auto send 
timing setting (C)

100% - 75%

0 - 5

5

3 (49%-25%)

74% - 50%

74% - 50%

4

49% - 25%

49% - 25%

3

LOWER 25

25% or less

2

NEAREND

NEAREND

1

EMPTY

EMPTY

0

H

TONER ORDER 
TIMING (M)

100% - 75%

Toner order auto send 
timing setting (M)

100% - 75%

0 - 5

5

3 (49%-25%)

74% - 50%

74% - 50%

4

49% - 25%

49% - 25%

3

LOWER 25

25% or less

2

NEAREND

NEAREND

1

EMPTY

EMPTY

0

I

TONER ORDER 
TIMING (Y)

100% - 75%

Toner order auto send 
timing setting (Y)

100% - 75%

0 - 5

5

3 (49%-25%)

74% - 50%

74% - 50%

4

49% - 25%

49% - 25%

3

LOWER 25

25% or less

2

NEAREND

NEAREND

1

EMPTY

EMPTY

0

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

)66)81&7,216(783

$˖

˷̚˹

˖)66ǂ02'(1(%

$˖

˖5(75<B%86<

%˖

˖7,0(50,187(B%86<

&˖

˖5(75<B(5525

'˖

˖721(5ǂ25'(5ǂ7,0,1*.

)˖

˖7,0(50,187(B(5525

(˖

˖721(5ǂ25'(5ǂ7,0,1*&

*˖

˖721(5ǂ25'(5ǂ7,0,1*0

+˖

˖721(5ǂ25'(5ǂ7,0,1*<

,˖

2.

MX-4101N  SIMULATION  6 – 39

 

27-6

Setting

Function (Purpose) Used to set of the manual service call.

(FSS function)

Operation/Procedure
1)

Enter the set value with 10-key.

2)

Press [OK] key.
The set value in step 1) is saved.

 

27-7

Setting

Function (Purpose) Used to set of the enable, alert callout.

(FSS function)

Operation/Procedure
1)

Select an item to be set with [

↑] [↓] keys.

2)

Enter the set value with 10-key.

3)

Press [OK] key.
The set value in step 2) is saved.

*1 The FSS function setting can be changed only from Disable to
Enable. (Cannot be changed from Enable to Disable.)
*2 Alert send timing

 

27-9

Setting

Function (Purpose) Used to set the paper transport time record-

ing YES/NO threshold value and shading
gain adjustment retry number. 
(FSS function)

Operation/Procedure
1)

Select an item to be set with [

↑] [↓] keys.

2)

Enter the set value with 10-key.

3)

Press [OK] key.
The set value in step 2) is saved.

* Items A, B: 0%, standard passing time between sheets of paper;

100%, time for judgment as a jam between sheets of paper.

* Item C: Because of a trouble in shading operation, the number of

retry is actually not registered. 

0

Allow (Default) 

1

Inhibit

A

FSS 
FUNCTION

0

FSS function enable

1

FSS function disable (*1) (Default)

B

ALERT

0

Alert call enable (*2) (Default)

1

Alert call disable

No alert cause

Initial state / Trouble / Continuous JAM alert

Maintenance

When the maintenance timing is reached.

Service call

When pressing Service call.

Toner send request

When the toner order automatic send setting is 
reached.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

7$*6(77,1*

35(6(17˖
ǂǂ1(:˖

6(7

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

0$18$/6(59,&(&$//6(783

$˖

˷̚˹

˖<(612

$˖

2.

Toner collection request

Revision of the toner installation date (only for 
a new product)

Alert resend

A

FEED TIME 1

0 - 

100

Threshold value of the paper 
transport time between sensors 
(Main unit) (50: Default)

B

FEED TIME 2

0 - 

100

Threshold value of the paper 
transport time between sensors 
(RSPF) (50: Default)

C

GAIN 
ADJUSTMENT 
RETRY

0 - 20

Threshold value of the gain 
adjustment retry number 
(11: Default)

D

JAM ALERT

1 - 

100

Alert judgment threshold value 
for occurrence of continuous 
jams
Alert judgment threshold value 
for occurrence of continuous 
jams (Setting of the number of 
times of continuous jams as the 
alert for continuous jams) 
(Default: 10 times)

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

)66)81&7,216(783)81&7,21

$˖

˷̚˹

˖)81&7,21<(612

$˖

˖$/(57<(612

%˖

2.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

)66)81&7,21$'-8670(17

$˖

˷̚˹

˖)(('7,0(

$˖

˖)(('7,0(

%˖

˖*$,1$'-8670(175(75<

&˖

˖-$0$/(57

'˖

2.

MX-4101N  SIMULATION  6 – 40

 

27-10

Data clear

Function (Purpose) Used to clear the trouble prediction history

information. (FSS function)

Operation/Procedure
1)

Press [EXECUTE] key.

2)

Press [YES] key.
The history information of trouble prediction is cleared.

 

27-11

Others

Function (Purpose) Used to check the serial communication

retry number and the scanner gain adjust-
ment retry number history. (FSS function)

Operation/Procedure
The serial communication retry number history and the scanner
gain adjustment retry number history are displayed.

 

27-12

Others

Function (Purpose) Used to check the high-density, half-tone

process control and the automatic registra-
tion adjustment error history. 
(FSS Function)

Operation/Procedure
The high density, the half tone, and the automatic registration
adjustment error history are displayed.

Target history

Serial communication retry number history
High density process control error history
Half tone process control error history
Automatic registration adjustment error history
Scanner gain adjustment retry history
DSPF gain adjustment retry history (DSPF model only)
Paper transport time between sensors

LSU1

99/99/99 
99:99:99

 8 digits

Serial communication 
retry number history 
display
* For DSPF1/DSPF2, 

only the DSPF model 
is displayed.

LSU2

99/99/99 
99:99:99

8 digits

DESK1

99/99/99 
99:99:99

8 digits

DESK2

99/99/99 
99:99:99

8 digits

DSPF1

99/99/99 
99:99:99

8 digits

DSPF2

99/99/99 
99:99:99

8 digits

FINISHER1

99/99/99 
99:99:99

8 digits

FINISHER2

99/99/99 
99:99:99

8 digits

SCAN GAIN 
ADJ1

99/99/99 
99:99:99

8 digits

Scanner gain 
adjustment retry history

SCAN GAIN 
ADJ2

99/99/99 
99:99:99

8 digits

SCAN GAIN 
ADJ3

99/99/99 
99:99:99

8 digits

SCAN GAIN 
ADJ4

99/99/99 
99:99:99

8 digits

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

7528%/(35(&2*1,7,21+,6725<&/($5

$5(<28685("

<(6

12

(;(&87(

SCAN GAIN 
ADJ5

99/99/99 
99:99:99

8 digits

Scanner gain 
adjustment retry history

DSPF GAIN 
ADJ1

99/99/99 
99:99:99

8 digits

DSPF gain adjustment 
retry history 
(Only the DSPF model is 
displayed.)

DSPF GAIN 
ADJ1

99/99/99 
99:99:99

8 digits

DSPF GAIN 
ADJ2

99/99/99 
99:99:99

8 digits

DSPF GAIN 
ADJ3

99/99/99 
99:99:99

8 digits

DSPF GAIN 
ADJ4

99/99/99 
99:99:99

8 digits

DSPF GAIN 
ADJ5

99/99/99 
99:99:99

8 digits

HV_ERR1

High density error history 1

HV_ERR2

High density error history 2

HV_ERR3

High density error history 3

HV_ERR4

High density error history 4

HV_ERR5

High density error history 5

H_TONE ERR1

Half tone error history 1

H_TONE ERR2

Half tone error history 2

H_TONE ERR3

Half tone error history 3

H_TONE ERR4

Half tone error history 4

H_TONE ERR5

Half tone error history 5

AUTO REG ADJ1

Automatic registration adjustment error history 1

AUTO REG ADJ2

Automatic registration adjustment error history 2

AUTO REG ADJ3

Automatic registration adjustment error history 3

AUTO REG ADJ4

Automatic registration adjustment error history 4

AUTO REG ADJ5

Automatic registration adjustment error history 5

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

7528%/(35(&2*1,7,215(68/7

'$7(5(75<

/68
/68
'(6.
'(6.
),1,6+(5
),1,6+(5
'63)
'63)

6&$1*$,1$'-

'63)*$,1$'-

'63)*$,1$'-

6&$1*$,1$'-

6&$1*$,1$'-

6&$1*$,1$'-

'63)*$,1$'-
'63)*$,1$'-

6&$1*$,1$'-

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

7528%/(35(&2*1,7,215(68/7$'-8670(17B(5525

'$7((5525&2'(

+9B(55
+9B(55
+9B(55
+9B(55
+9B(55
+B721((55
+B721((55
+B721((55

+B721((55

$8725(*$'-

$8725(*$'-

+B721((55

$8725(*$'-

$8725(*$'-

$8725(*$'-