Sharp MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) Service Manual ▷ View online
MX-4101N SIMULATION 6 – 29
24-15
Purpose
Data clear
Function (Purpose) Used to clear the counters related to the
scan mode and the image send.
Section
Operation/Procedure
1)
1)
Select the item to be cleared with the touch panel key.
2)
Press [EXECUTE] key.
3)
Press [YES] key.
The target counter is cleared.
The target counter is cleared.
24-30
Purpose
Data clear
Function (Purpose) Used to initialize the administrator pass-
word.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The administrator password is initialized.
The administrator password is initialized.
If the administrator password of system setting and Web page is
forgotten, execute this simulation to set the password to "admin"
(default).
forgotten, execute this simulation to set the password to "admin"
(default).
24-31
Purpose
Data clear
Function (Purpose) Used to initialize the service mode pass-
word.
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The service mode password is initialized.
The service mode password is initialized.
If the password of Web page is forgotten, execute this simulation to
set the password to "service" (default).
set the password to "service" (default).
RECEIVED TIME
FAX receive time
ACR SEND
Number of carrier prefix adding
communications
communications
NET SCN ORG_B/W
Network scanner document read quantity
counter (B/W scan job)
counter (B/W scan job)
NET SCN ORG_CL
Network scanner document read quantity
counter (COLOR scan job)
counter (COLOR scan job)
NET SCN ORG_2CL
Network scanner document read quantity
counter (2-color scan job)
counter (2-color scan job)
NET SCN ORG_SGL
Network scanner document read quantity
counter (single color scan job)
counter (single color scan job)
INTERNET FAX
OUTPUT
OUTPUT
Number of internet FAX output
INTERNET FAX
SEND OUTPUT
SEND OUTPUT
Number of internet FAX sending page
INTERNET FAX
RECEIVE
RECEIVE
Number of internet FAX receive
INTERNET FAX
SEND
SEND
Number of internet FAX send
MAIL COUNTER
Number of times of E-MAIL send
FTP COUNTER
Number of FTP send
SMB SEND
Number of SMB send
USB CNT
Number of times of USB storage
TRIAL MODE_B&C
Trial mode counter (B/W & COLOR scan job)
SCAN TO HDD_B/W
SCAN TO HDD record quantity (B/W)
SCAN TO HDD_CL
SCAN TO HDD record quantity (COLOR)
SCAN TO HDD_2CL
SCAN TO HDD record quantity (2-COLOR)
SCAN TO HDD_SGL
SCAN TO HDD record quantity (SINGLE color)
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
)$;&2817(5'$7$&/($5
)$;ǂ287387
)$;ǂ287387B/
)$;ǂ5(&(,9('
)$;ǂ6(1'
6(1'ǂ,0$*(6
6(1'ǂ,0$*(6B/
5(&(,9('ǂ7,0(
6(1'ǂ7,0(
$&5ǂ6(1'
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
1(7:25.6&$11(5&2817(5'$7$&/($5
1(76&125*B%:
1(76&125*B&/
1(76&125*B&/
1(76&125*B6*/
,17(51(7)$;ǂ287387
,17(51(7)$;6(1'ǂ287387
,17(51(7)$;ǂ5(&(,9(
,17(51(7ǂ)$;ǂ6(1'
0$,/&2817(5
)73&2817(5
60%6(1'
86%&17
75,$/02'(B% &
6&$172+''B%:
6&$172+''B&/
6&$172+''B&/
6&$172+''B6*/
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$'0,13$66:25',1,7,$/,=(
$5(<28685("
<(6
12
(;(&87(
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6(59,&(3$66:25',1,7,$/,=(
$5(<28685("
<(6
12
(;(&87(
MX-4101N SIMULATION 6 – 30
25
25-1
Purpose
Operation test/check
Function (Purpose) Used to check the operations of the devel-
oping section.
Section
Process (Developing section)
Operation/Procedure
1)
1)
Select the process speed with [MIDDLE], [LOW] keys.
2)
Press [EXECUTE] key.
The developing motor and the OPC drum motor rotate for 3
minutes and the output level of the toner density sensor is dis-
played.
The developing motor and the OPC drum motor rotate for 3
minutes and the output level of the toner density sensor is dis-
played.
NOTE: The toner cartridge must be removed before executing this
simulation.
If this simulation is executed with the toner cartridge
installed, toner will be forcibly supplied to the developing
unit, resulting in overtoner and a trouble.
If this simulation is executed with the toner cartridge
installed, toner will be forcibly supplied to the developing
unit, resulting in overtoner and a trouble.
25-2
Purpose
Setting
Function (Purpose) Used to make the initial setting of toner
density when replacing developer. (Auto-
matic adjustment)
matic adjustment)
Section
Image process (Photoconductor/Develop-
ing/Transfer/Cleaning)
ing/Transfer/Cleaning)
Operation/Procedure
1)
1)
Select a color to be adjusted with the touch panel.
2)
Press [EXECUTE] key.
The developing motor rotates for 3 minutes, and the toner density
sensor makes sampling of the toner density. The detected level is
displayed.
After stopping the developing motor, the average value of the toner
density sampling results is set as the reference toner density con-
trol level.
sensor makes sampling of the toner density. The detected level is
displayed.
After stopping the developing motor, the average value of the toner
density sampling results is set as the reference toner density con-
trol level.
NOTE: When the above operation is interrupted on the way, the
reference toner concentration level is not set. Also when
error code of EE-EC, EE-EL or EE-EU is displayed, the ref-
erence toner density level is not set normally.
error code of EE-EC, EE-EL or EE-EU is displayed, the ref-
erence toner density level is not set normally.
Do not execute this simulation except when new developer is sup-
plied. If it is executed in other cases, undertoner or overtone may
occur, causing a trouble.
plied. If it is executed in other cases, undertoner or overtone may
occur, causing a trouble.
26
26-1
Purpose
Setting
Function (Purpose) Used to set the paper exit tray (MX-TRX1).
Section
Section
Paper exit
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key. (The set value is saved.)
This setting is required to use the paper exit tray unit (MX-TRX1).
TCD_K
Toner density sensor K
TCD_C
Toner density sensor C
TCD_M
Toner density sensor M
TCD_Y
Toner density sensor Y
TCV_K
Toner density sensor control voltage level K
TCV_C
Toner density sensor control voltage level C
TCV_M
Toner density sensor control voltage level M
TCV_Y
Toner density sensor control voltage level Y
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
721(56(1625287387021,725
(;(&87(
7&'B.
7&'B&
7&'B0
7&'B<
7&9B.
7&9B&
7&9B0
7&9B<
(;(&87(
0,''/(
/2:
Toner density control
adjustment value in the
low speed process mode
adjustment value in the
low speed process mode
AT DEVE ADJ_L_K
AT DEVE ADJ_L_C
AT DEVE ADJ_L_M
AT DEVE ADJ_L_Y
AT DEVE ADJ_L_C
AT DEVE ADJ_L_M
AT DEVE ADJ_L_Y
Toner density control
adjustment value in the
medium speed process
mode
adjustment value in the
medium speed process
mode
AT DEVE ADJ_M_K
AT DEVE ADJ_M_C
AT DEVE ADJ_M_M
AT DEVE ADJ_M_Y
AT DEVE ADJ_M_C
AT DEVE ADJ_M_M
AT DEVE ADJ_M_Y
Toner density sensor
control voltage level in
the low speed process
mode
control voltage level in
the low speed process
mode
AT DEVE VO_L_K
AT DEVE VO_L_C
AT DEVE VO_L_M
AT DEVE VO_L_Y
AT DEVE VO_L_C
AT DEVE VO_L_M
AT DEVE VO_L_Y
Toner density sensor
control voltage level in
the medium speed
process mode
control voltage level in
the medium speed
process mode
AT DEVE VO_M_K
AT DEVE VO_M_C
AT DEVE VO_M_M
AT DEVE VO_M_Y
AT DEVE VO_M_C
AT DEVE VO_M_M
AT DEVE VO_M_Y
Item/Display
Content
A
0
YES
Paper exit tray : YES
1
NO
Paper exit tray : NO
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$8720$7,&'(9(/23(5$'-8670(17
(;(&87(
$7'(9($'-B/B.
$7'(9(92B0B.
$7'(9($'-B/B&
$7'(9(92B0B&
$7'(9($'-B/B0
$7'(9(92B0B0
$7'(9($'-B/B<
$7'(9(92B0B<
$7'(9($'-B0B.
$7'(9($'-B0B&
$7'(9($'-B0B0
$7'(9($'-B0B<
$7'(9(92B/B.
$7'(9(92B/B&
$7'(9(92B/B0
$7'(9(92B/B<
.
&
0
<
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
5,*+775$<6(783
$˖
˷̚˹
˖<(612
$˖
2.
MX-4101N SIMULATION 6 – 31
26-2
Purpose
Setting
Function (Purpose) Used to set the paper size of the large
capacity tray (LCC). (When the paper size
is changed, this simulation must be exe-
cuted to change the paper size in software.)
is changed, this simulation must be exe-
cuted to change the paper size in software.)
Section
Paper feed
Operation/Procedure
Select a paper size to be changed with the touch panel.
Select a paper size to be changed with the touch panel.
26-3
Purpose
Setting
Function (Purpose) Used to set the specifications of the auditor
.(Setting must be made according to the
auditor use conditions.)
auditor use conditions.)
Section
Auditor
Operation/Procedure
Select an item to be set with the touch panel.
Select an item to be set with the touch panel.
(*1) Displayed only when EQUITRAC.
(*2) Details of the vendor mode
Operation 1:
Standby during setting time of auto clear. Default is 60 seconds,
which can be changed in the system setting.
Operation 2:
Auto clear is not made.
Operation 3:
The display is shifted to the initial screen.
Standby during setting time of auto clear. Default is 60 seconds,
which can be changed in the system setting.
Operation 2:
Auto clear is not made.
Operation 3:
The display is shifted to the initial screen.
LCC
0
8.5 x 11
1
A4
2
B5
G/LBS SET
0
GRAM
1
LBS
Item/Display
Content
Default
value
BUILT-IN
AUDITOR
AUDITOR
P10
Built-in auditor mode
(standard mode) operation.
(standard mode) operation.
P10
EC1
EC1 mode operation
OUTSIDE
AUDITOR
AUDITOR
NONE
No external connection
vendor is used.
vendor is used.
NONE
P VENDOR1
Coin vendor mode
(Only the copy mode can
be controlled.)
(Only the copy mode can
be controlled.)
P VENDOR2
Vendor mode
communicating with the
parallel I/F (for DocuLyzer)
(Japan only)
communicating with the
parallel I/F (for DocuLyzer)
(Japan only)
VENDOR-EX
(*1)
(*1)
Vendor I/F for EQUITRAC
VENDOR-EX
(MULTI) (*1)
(MULTI) (*1)
VENDOR-EX + Multi job
cueing Enable mode
cueing Enable mode
P OTHER
NOT USED
S_VENDOR
Serial vendor mode
DOC ADJ
ON
Support for the auditor in
document filing print
document filing print
OFF
OFF
No support for the auditor in
document filing print
document filing print
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
6,=(6(783
h
%
$
/&&
˖
*5$0
/%6
*/%66(7
˖
PF ADJ
ON
Continuous printing is
performed in the duplex
print mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
performed in the duplex
print mode.
If the remaining money
expires during continuous
printing, the sheets in the
machine are discharged
without being printed on the
back surfaces.
OFF
OFF
Continuous printing is not
performed in the duplex
print mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back
surface.
performed in the duplex
print mode. (The remaining
amount is checked for
printing every surface in all
the printing process.)
If the remaining money
expires during printing, the
sheet is discharged without
printing on the back
surface.
VENDOR
MODE (*2)
MODE (*2)
MODE1
Vendor mode 1
MODE
3
MODE2
Vendor mode 2
MODE3
Vendor mode 3
COUNTUP
TIMING
TIMING
FUSER_IN
When the paper lead edge
passes the fusing rear
sensor.
passes the fusing rear
sensor.
EXIT_
OUT
FUSER_OUT
When the paper rear edge
passes the fusing rear
sensor.
passes the fusing rear
sensor.
EXIT_OUT
When the paper rear edge
passes the paper exit
sensor in the main unit, the
right tray, and the after
process unit.
passes the paper exit
sensor in the main unit, the
right tray, and the after
process unit.
Completion
of the
specified
quantity.
(Money
remaining)
Insufficient money during
copy job
Completion
of the
specified
quantity.
(No money
remaining)
remaining)
BW/Color
(no money
remaining)
remaining)
Color
(Money
remaining)
Condition 1
Condition 2
Condition 3
Condition 4
MODE1
Operation 1
Operation 2
Operation 2
Operation 1
MODE2
Operation 1
Operation 1
Operation 2
Operation 1
MODE3
Operation 1
Operation 3
Operation 2
Operation 3
Item/Display
Content
Default
value
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$8',7256(783
3
(&
%8,/7,1$8',725
˖
121(
39(1'25
39(1'25
2876,'($8',725
˖
327+(5
9(1'25(;
21
2))
'2&$'-
˖
21
2))
3)$'-
˖
02'(
02'(
02'(
9(1'2502'(
˖
)86(5B,1
(;,7B287
)86(5B287
&2817837,0,1*
˖
9(1'25(;08/7,
6B9(1'25
MX-4101N SIMULATION 6 – 32
26-5
Purpose
Setting
Function (Purpose) Used to set the count mode of the total
counter and the maintenance counter. (A3/
11x17 size)
11x17 size)
Section
Operation/Procedure
1)
1)
Select an item to be set with [
↑] [↓] keys.
2)
Enter the setting value with 10-key
1 = Count up by 1, 2 = Count up by 2
1 = Count up by 1, 2 = Count up by 2
3)
Press [OK] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
26-6
Purpose
Setting
Function (Purpose) Used to set the specifications (paper, fixed
magnification ratio, etc.) of the destination.
Section
Operation/Procedure
1)
1)
Select an item to be set with the touch panel.
2)
Press [EXECUTE] key.
The selected set content is saved.
The selected set content is saved.
26-10
Purpose
Setting
Function (Purpose) Used to set the trial mode of the network
scanner.
Section
Operation/Procedure
1)
1)
Enter the set value with 10-key.
2)
Press [OK] key.
The set value in step 1) is saved.
The set value in step 1) is saved.
26-18
Purpose
Setting
Function (Purpose) Used to set Disable/Enable of the toner
save mode operation.
(For the Japan and the UK versions.)
(For the Japan and the UK versions.)
Section
Operation/Procedure
1)
1)
Select an item to be set with [
↑] [↓] keys.
2)
Enter the set value with 10-key.
3)
Press [OK] key.
The set value in step 2) is saved.
The set value in step 2) is saved.
Item/Display
Content
Default
value
A
TOTAL (B/W)
Total counter (B/W)
1
(Japan)
2
(Except
Japan)
B
TOTAL (COL)
Total counter (Color)
C
MAINTE (B/W)
Maintenance counter (B/W)
2
D
MAINTE (COL)
Maintenance counter (Color)
E
DEV (B/W)
Developer counter (B/W)
F
DEV (COL)
Developer counter (Color)
U.S.A.
United States of America
CANADA
Canada
INCH
Inch series, other destinations
JAPAN
Japan
AB_B
AB series (B5 detection), other destinations
EUROPE
Europe
U.K.
United Kingdom
AUS.
Australia
AB_A
AB series (A5 detection), other destinations
CHINA
China
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
$h&281783
$˖
˷̚˹
˖727$/%:
$˖
˖727$/&2/
%˖
˖0$,17(%:
&˖
˖0$,17(&2/
'˖
˖'(9&2/
)˖
˖'(9%:
(˖
2.
TRIAL MODE
( 0 : YES 1 : NO )
0
Trial mode setting
1
Trial mode cancel (Default)
Item
Display
Content
Default
value
A
COPY
0
Copy toner save mode is inhibited.
0
1
Copy toner save mode is allowed
B
PRINTER
0
Printer toner save mode is inhibited.
0
1
Printer toner save mode is allowed.
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
'(67,1$7,216(783
(;(&87(
86$
&$1$'$
-$3$1
,1&+
$%B%
(8523(
$86
8.
$%B$
&+,1$
ǂǂǂ6,08/$7,21ǂǂ12
&/26(
7(67
1(7:25.6&$11(575,$/02'(6(783
$˖
˷̚˹
˖75,$/02'(˄<(612˅
$˖
2.
Click on the first or last page to see other MX-4100N / MX-4101N / MX-5000N / MX-5001N (serv.man14) service manuals if exist.