Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N Handy Guide ▷ View online
SHARP
mSATA SSD REPLACEMENT PROCEDURE
49
Some data that is stored on the mSATA SSD can be backed up and reinstalled following replacement or
failure. If the mSATA SSD is operating normally before replacement, backup the data and then reinstall the
data onto the replacement mSATA SSD.
failure. If the mSATA SSD is operating normally before replacement, backup the data and then reinstall the
data onto the replacement mSATA SSD.
The mSATA SSD contains the following data:-
No.
Data
Backup Method
Data Reinstall Method
Reinstall
Operator
1
ICU firmware/ Snapshot
---
SIM49-01
Service
2
Font / Web Help
---
SIM49-01
Service
3
Option Font ROM
---
SIM49-01
Service
4
e-Manual
---
SIM49-03
Service
5
Watermark
---
SIM49-05
Service
6
OCR dictionary data
---
SIM49-06
Service
7
Backup data
---
---
---
8 System setting value data file
SIM56-02/ Device cloning /
Storage backup
SIM56-02/ Device cloning /
Storage backup
Service or
User
9
FAX/I-FAX reception image
data (backup)
SIM66-62
---
---
mSATA SSD Replacement Procedure
1. Back up the mSATA SSD data before replacement:-
Use SIM56-02 to back up the data onto a USB memory device.
Use Device Cloning function to back up the mSATA data when the operation panel screen has
Use Device Cloning function to back up the mSATA data when the operation panel screen has
been customised.
2. Replace the mSATA SSD.
3. Power on / Boot the MFP Device:
4. Install/Update the Engine firmware using SIM49-01.
5. Install the E-Manual Data onto the HDD using SIM49-03.
6. Install Watermark data onto the HDD using SIM49-05:
U2-60 trouble will be displayed when no Watermark data is present. After installing the Watermark
data, reboot the MFP and cancel U2-60 trouble by executing SIM16.
data, reboot the MFP and cancel U2-60 trouble by executing SIM16.
7. Import the storage data backed up in Step 1.
Use SIM56-02 and/or device cloning function to import the mSATA SSD back up data.
FIRMWARE & PRINT DRIVER REVISION
SHARP
50
FIRMWARE REVISION:
Firmware ROM
UP_BUNDLE
05.11.K1.00
BTM_BUNDLE
16.11.15.00
ICU MAIN
05.11.K1.00
ICU BIOS
01.01.Z1.00
ASIC MAIN
05.10.Z1.00
ASIC SUB
01.02.Z1.00
PCU
05.00.Z1.00
SCU
04.00.Z1.00
UI CONTENTS
05.10.Z1.00
DESK
01.01.Z1.00
LCC [MX-LC17]
01.01.Z1.00
INNER FINISHER [MX-FN27]
01.03.Z1.a0
PUNCH [MX-FN27]
01.00.Z1.00
1K FINISHER [MX-FN28/29]
01.01.Z1.00
3K FINISHER [MX-FN30/31]
01.02.Z1.00
3K SADDLE [MX-FN31]
01.02.Z1.00
3K PUNCH [MX-FN30/31]
01.00.Z1.00
FAX MAIN [MX-FX15]
02.01.Z1.00
ACU
01.00.Z1.00
WATERMARK
02.00.00.00
E-MANUAL
02.30.K1.00
DATA SECURITY KIT [MX-FR51U]
05.00.Kc.00
PRINT DRIVER REVISION:
Driver
Windows OS (32Bit)
2008, 7, 8, 8.1, 10
Windows OS (64Bit)
2008(R2), 2012(R2), 2016, 7, 8, 8.1,
10
PCL6
02.02.10.08 [WHQL]
02.02.10.08 [WHQL]
PS
02.02.10.09 [WHQL]
02.02.10.09 [WHQL]
PPD
1.13.0.0 [WHQL]
1.13.0.0 [WHQL]
PC-Fax
3.8.21.24
3.8.21.24
TWAIN
3.01.027.000 [WHQL]
3.01.027.000 [WHQL]
Sharp UD2
02.05.13.06 [WHQL]
02.05.13.06 [WHQL]
For the latest Firmware and Print Driver version(s), please refer to the SHARP Support Website.
SHARP
TEST SIMULATION
51
The following pages contain information regarding test simulations. For a detailed description for each test
simulation, please refer to the MX-3050N-MX6070N Service Manual.
simulation, please refer to the MX-3050N-MX6070N Service Manual.
For MX-3050N-MX6070N series, there are Two Simulation Modes:
EASY Mode:
Displays commonly used Simulations for each category, allowing easy access for technicians to change
settings, perform maintenance and adjustments.
Displays commonly used Simulations for each category, allowing easy access for technicians to change
settings, perform maintenance and adjustments.
CLASSIC Mode:
All Simulations are listed and can be accessed by entering the main code, then sub code as per previous
model series.
Simulation Entry Method:
All Simulations are listed and can be accessed by entering the main code, then sub code as per previous
model series.
Simulation Entry Method:
1. Double-press the [HOME] key so the Total Count/Toner Quantity Display screen will appear, then touch
the VER display section in the bottom right hand corner (as indicated below):
2. Touch/Enter
keys in sequence:-
3. Depending on Region, EASY Mode or CLASSIC Mode Simulation menu will now be displayed:-
EASY MODE:
CLASSIC MODE:
TEST SIMULATION
SHARP
52
4. For EASY mode, select the required Main Category Tab and enter the desired Simulation menu.
For CLASSIC mode only, enter the main SIM code using the 10-key pad and touch the START (B/W or
COLOUR) key or select the main code from the SIM key list.
COLOUR) key or select the main code from the SIM key list.
SIMULATION KEY INDEX:
Switch between Easy Mode & Classic Mode
Exit button
Change Language
Back button
Switch to Test Mode
Cancel/Clear button
EASY MODE – CATEGORY SIMULATION LIST
Note: For SIM Descriptions, please refer to Classic Mode - Full Simulation List.
INSTALLATION
Main Category
SIM
Main Category
SIM
ADJUSTMENT
Process
46-74
DATA DISPLAY
Counter Display
22-01
50-22
22-09
Positioning
50-10
22-13
Copy
46-21
System / Version
22-05
Printer
67-25
22-10
64-05
List Printing
22-06
Image Quality
Adjustment
Adjustment
63-02
23-02
63-03
Counter Display
22-01
44-06
22-09
44-26
22-13
46-74
USB Storage
56-99
REGISTRATION
SETTINGS
SETTINGS
Function / Option
Settings
Settings
26-01
VERSION
UPGRADE
UPGRADE
49-01
26-02
49-03
26-03
49-05
26-50
49-06
26-65
49-10
26-78
ERROR RELEASE
13
Counter Mode
26-05
14
26-08
15
26-52
16
FAX/Image Send Data
66-01
HISTORY
History Date List
Use SIM
Toner Setting
26-18
26-69
FSS Setting
27-02
27-04
27-07
27-09
27-14
27-15
27-16
27-17
27-04
27-07
27-09
27-14
27-15
27-16
27-17
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N service manuals if exist.