Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N Handy Guide ▷ View online
SHARP
MX-EB18 WIRELESS LAN SETUP
29
4. Reopen the Settings menu, select Network Settings, then Wireless Settings:-
Note: Administrator login will be required.
5. The current Wireless Settings will be displayed. Scroll down and select Setup to configure the Wireless
Settings.
Note: To return the Wireless Settings back to factory default (prior to setup), select Initialize.
MX-EB18 WIRELESS LAN SETUP
SHARP
30
6. Configure the required Wireless Settings for Access Point Mode or Infrastructure Mode by selecting
the Access Point Mode or Infrastructure Mode tab:-
Note: Detailed information regarding Wireless Settings can be found on the following page.
Example shown below: Access Point Mode.
Once configured, click Submit and reboot the MFP device for the new settings to be applied.
SHARP
MX-EB18 WIRELESS LAN SETUP
31
WIRELESS SETTINGS:
Name
Infrastructure Mode Setting
Access Point Mode Setting
SSID:
Enter the SSID of the access point that the
MFP is to connect to.
MFP is to connect to.
Enter the SSID of the Access Point that the
MFP is to broadcast (for clients to connect).
MFP is to broadcast (for clients to connect).
Security
Type:
Type:
Select the security type that is set for the
access point:-
access point:-
1. None (Default).
2. WEP.
3. WPA-Personal.
4. WPA-Enterprise.
5. WPA2-Personal.
6. WPA2-Enterprise
2. WEP.
3. WPA-Personal.
4. WPA-Enterprise.
5. WPA2-Personal.
6. WPA2-Enterprise
Select the security type to use between
mobile devices and MFP:-
mobile devices and MFP:-
1. None (Default).
2. WEP.
3. WPA-Personal.
4. WPA2-Personal
2. WEP.
3. WPA-Personal.
4. WPA2-Personal
Encryption:
Select an Encryption Type:-
When the security type is set to [WEP],
this setting is greyed out. When the
security type is set to [None], either
[WEP] or [None] can be selected for
encryption. When [WPA-Personal], [WPA-
Enterprise], [WPA2-Personal] or [WPA2-
Enterprise] are set, either [TKIP] or [AES]
encryption types can be selected.
When the security type is set to [WEP],
this setting is greyed out. When the
security type is set to [None], either
[WEP] or [None] can be selected for
encryption. When [WPA-Personal], [WPA-
Enterprise], [WPA2-Personal] or [WPA2-
Enterprise] are set, either [TKIP] or [AES]
encryption types can be selected.
Select an Encryption Type:-
When the security type is set to [WEP], this
setting is greyed out.
When the security type is set to [None],
either [WEP] or [None] can be selected for
encryption. When [WPA-Personal] or [WPA2-
Personal] are set, either [TKIP] or [AES]
encryption types can be selected.
When the security type is set to [WEP], this
setting is greyed out.
When the security type is set to [None],
either [WEP] or [None] can be selected for
encryption. When [WPA-Personal] or [WPA2-
Personal] are set, either [TKIP] or [AES]
encryption types can be selected.
Security Key:
Enter the security key.
WEP 64 bit: 5 characters or a 10-digit hex number.
WEP 128 bit: 13 characters or a 26-digit hex number.
WPA/WPA2: 8~63 characters or a 64-digit hex number.
WEP 64 bit: 5 characters or a 10-digit hex number.
WEP 128 bit: 13 characters or a 26-digit hex number.
WPA/WPA2: 8~63 characters or a 64-digit hex number.
Show
Security Key:
Security Key:
Change this setting to [ON] show the security key. The factory default is [OFF]
Device IP
Address:
Address:
Not Shown.
Set the IP address of the MFP.
(Set a different segment from the IP address
for a wired LAN connection).
(Set a different segment from the IP address
for a wired LAN connection).
Channel:
Not Shown.
Note: The channel used by the Access
Point is automatically selected.
Note: The channel used by the Access
Point is automatically selected.
Set a channel for the usage of wireless LAN
automatically or manually within the channel
1 to 14. (The number of channel available
varies depending on the regulation for each
country). Factory default is [6]
automatically or manually within the channel
1 to 14. (The number of channel available
varies depending on the regulation for each
country). Factory default is [6]
Transmission
Level:
Level:
Not shown.
Select a transmission level:-
1 (Low), 2 (Mid), 3 (High -Default).
1 (Low), 2 (Mid), 3 (High -Default).
Bandwidth:
Not shown.
This should be used if communication mode
is set to [11n]. Either 20MHz (Default) or
40MHz can be selected.
is set to [11n]. Either 20MHz (Default) or
40MHz can be selected.
IP Address
Distribution
Range:
Distribution
Range:
Not shown.
Set the range of IP addresses to be assigned
to mobile devices. The values in the first
three ranges of the device IP address are
automatically shown in the first three ranges
of the IP addresses to be assigned to mobile
devices.
to mobile devices. The values in the first
three ranges of the device IP address are
automatically shown in the first three ranges
of the IP addresses to be assigned to mobile
devices.
Leasing
Period:
Period:
Not shown
Set the time to automatically release each of
the IP address assigned to mobile devices.
Select 1 to 60 min (default is [15] min).
the IP address assigned to mobile devices.
Select 1 to 60 min (default is [15] min).
MX-EB18 WIRELESS LAN SETUP
SHARP
32
7. Once the Wireless LAN is enabled, a Wireless LAN connection status icon will appear on the upper
screen system bar (as shown):-
Wireless LAN Status Indications:-
Currently
Connected
Access Point
Not Connected
Access Point
Standby
Not
Connected*
* Not connected due to connection failure of USB wireless module or operation failure.
(incorrect wireless LAN settings for example).
(incorrect wireless LAN settings for example).
To View Wireless LAN Settings:-
In addition to viewing the Wireless LAN settings via Settings (Network Settings – Wireless Settings menu), the
current Wireless LAN settings can also be displayed when the Wireless Icon key in the system bar is pressed.
current Wireless LAN settings can also be displayed when the Wireless Icon key in the system bar is pressed.
Select Check Wireless LAN Settings to view the current settings for the Wireless LAN.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N service manuals if exist.