DOWNLOAD Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N Service Manual ↓ Size: 5.03 MB | Pages: 82 in PDF or view online for FREE

 

 

The MX-3050N-MX-6070N series can be configured for Pull / Find Me Printing by using the standard Sharp 
Print Release system (rather than external server). Sharp Print Release is a printing feature whereby a user’s 
print job is held on a Master MFP, and is released by the user on either a Master or Client MFP supporting 
this feature. Once enabled, approx. 16GB of storage is available on the Master MFP. It is also recommended 
that a maximum of 5 Client MFPs can connect to one Master MFP. 

 

Sharp Print Release can be used with or without authentication. When authentication is disabled, all print 
jobs held on the master can be displayed/released on any Master or Client MFP by any User. 
 
Configuring the MASTER MFP: 

 

1.  Open the Device Webpage and enter the following menu (Administrators password will be required):- 

 

2.  Enable Print Release and configure the following settings:- 

Connecting Code:    

 

 

Enter a unique code (up to 32 digits) that will allow the  

 

 

 

 

 

 

connection of Client MFPs to the Master MFP. 

Primary / Secondary Unit:   

 

Select Primary Unit (Master). 

Require Authentication when Storing: 

Enable when Authentication is required to release stored  

 

 

 

 

 

 

jobs 

Port Number: 

 

 

 

Default setting is Port 53000 – only change if necessary. 

Default Settings: 

 

 

 

Enable if B/W Print is required as default? 

 

 

 

 

 

 

Enable Print & Delete the Data so that the Users job is  

 

 

 

 

 

 

automatically deleted when released (recommended)? 

 

Delete Stored Data after Specified Time:  Enable if Print data stored on the Master MFP should be  

 

 

 

 

 

 

 

deleted automatically after a specified time. 

 

 

 

 

 

 

Configuring the CLIENT MFP: 

 

1.  Open the Device Webpage and enter the following menu (Administrators password will be required):- 

 

2.  Enable Print Release and configure the following settings:- 

Connecting Code:  

 Enter the same connecting code (up to 32 digits) that was 
entered for the Master MFP. 

Primary / Secondary Unit:   

 

Select Secondary Unit (Client). 

Address of Primary Unit:   

 

Enter the IP Address of the Master MFP. 

Port Number: 

 

 

 

Enter the same Port Number as the Master MFP 
Default setting is Port 53000. 

Default Settings: 

 

 

 

Enable if B/W Print is required as default? 

 

 

 

 

 

 

Enable Print & Delete the Data so that the Users job is  

 

 

 

 

 

 

automatically deleted when released (recommended)? 

 

 

 
Configuring the PRINTER DRIVER:  

 

1.  Install the required MX-3050N-MX-6070N series Print Driver (PCL or optional PS) and setup the 

Printer Queue to the MASTER MFP device. 

 

2.  When using Add Printer method, run Auto Configuration from the Configuration tab of Printer 

 

 

 

 

 

 

3.  Open the Printer Driver Printing Preferences, then the Job Handling menu and Check/Enable  

 

If User Authentication is enabled for Sharp Print Release, select the Authentication method and enter 
the User Number or Login/Password credentials (as indicated below):- 

 

 

 

Add Print Release Button to MFP Home Screen: 

 

1.  Enter System Settings – Home Screen Settings menu.  

 

2.  Under Condition Settings, select the required Home Button and add Print Release – click Submit. 

 

 

 

 

 

Sharp Print Release configuration is now complete. 

 

 

 

1.  Insert a USB memory device containing the firmware file (*.sfu) into the main USB Port. 

 

2.  Enter Simulation 49-01. 

Note 
When using Easy Mode, select Version Upgrade from the Installation tab and execute SIM49-01 
Firmware Update. 
In addition, if no USB device is detected, an error message will be displayed. 

 

 

 

 

 

 

3.  Using the LCD screen, browse and select the updated engine firmware file (*.sfu):- 

 

 

 

4.  The current firmware versions will now be displayed, and the items that require updating will be 

highlighted in 

RED

 (as indicated below):-