Sharp MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man10) Service Manual ▷ View online
MX-3640N MX-EB12 N (MIRRORING KIT) 22 – 4
B. Procedures
1) Assemble the HDD (the mirroring information of which is to be
deleted) to the U SB HDD case unit (SATA support), and con-
nect the USB cable.
When removing or attaching a HDD to the HDD case, be sure
to disconnect the USB cable from the PC in advance.
If this precaution is ignored, the HDD may be damaged.
If this precaution is ignored, the HDD may be damaged.
2) Copy the RIB Buster software files (RIB Buster {YYYYM-
MDD}.exe and Setup.ini) to a same directory of the PC.
• RIB Buster{YYYYMMDD}.exe
• Setup.ini
• RIB Buster{YYYYMMDD}.exe
• Setup.ini
3) Connect the PC and the USB HDD case unit assembled in
procedure 1) with the USB cable.
4) Double-click RIB Buster {YYYYMMDD}.exe to boo t the RIB
Buster software.
If the user account control is ON in VISTA or Windows7 set-
If the user account control is ON in VISTA or Windows7 set-
ting, the user account control m enu is displayed. Click [Allow]
on this menu.
5) Select the target HDD to delete the mirroring information.
6) Click [Clear RIB in HDD] button.
7) Click [OK] button. (The mirroring information is deleted.)
8) After completion of deleting the mirroring information, “OK” is
displayed.
MX-3640N MX-EB12 N (MIRRORING KIT) 22 – 5
C. Kinds of errors, causes and remedies
Phenomenon 1
An error indicating an abnormality in the Setup.ini file when booting
An error indicating an abnormality in the Setup.ini file when booting
the RIB Buster software.
Phenomenon 2
The mirroring information has not been deleted normally.
The mirroring information has not been deleted normally.
Phenomenon 3
Though the target HDD is connected, it is not displayed.
Though the target HDD is connected, it is not displayed.
Cause
Setup.ini file does not exists, or there is any
abnormality in the file.
Countermeasures Check to confirm that there is Setup.ini file in the
proper directory and that there is no abnormality in
the descriptions.
Cause
Temporary communication trouble, cable or other
device trouble, HDD trouble
Countermeasures 1. Click [Clear RIB in HDD] button again.
2. If the trouble is not solved by procedure 1. ,
disconnect and connect the cable, change the
devices, and reboot the RIB Buster. Then execute
procedure 1. .
Cause
The target HDD is not registered in the Setup.ini file.
Cable or other device trouble, HDD trouble
Countermeasures 1. Reboot RIB Buster. Click the framed section.
2. If the trouble is not solved by procedure 1. ,
replace the Setup. ini file and the RIB Buster
{YYYYMMDD} with the latest version, and execute
procedure 1. .
3. If the trouble is not solved by procedure 2. ,
disconnect and connect the connector, change the
devices, and reboot the RIB Buster. Then execute
procedure 1. .
MX-3640N MX-FWX1 (INTERNET FAX EXPANSION KIT) 23 – 1
MX-3640N
Service Manual
[23] MX-FWX1 (INTERNET FAX EXPANSION KIT)
1. Unpacking
A. Packed items check
2. Installation
In order to specify the address of the Internet Fax with the PC-FAX
driver, the PC-FAX driver must be updated by th e Internet Fax
expansion kit.
A. Enable setting of functions
1) Enter the product key to enable the functions.
a) Enter the system setting mode.
b) The machine enters the product key input mode.
c) Enter the product key.
d) Press the registration key.
b) The machine enters the product key input mode.
c) Enter the product key.
d) Press the registration key.
2) After completion of the product key input, turn OFF the power
switch on th e operation panel of the machine, and turn OFF
the main power switch.
3) Turn ON the main pow er switch and the power switch on the
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Product key sheet
1
1
2
MX-3640N MX-AMX1 (APPLICATION INTEGRATION MODULE) 24 – 1
MX-3640N
Service Manual
[24] MX-AMX1 (APPLICATION INTEGRATION MODULE)
1. Unpacking
A. Packed items check
2. Installation
A. Enable setting of functions
1) Enter the product key to enable the functions.
a) Enter the system setting mode.
b) The machine enters the product key input mode.
c) Enter the product key.
d) Press the registration key.
b) The machine enters the product key input mode.
c) Enter the product key.
d) Press the registration key.
2) After completion of the product key input, turn OFF the power
switch on th e operation panel of the machine, and turn OFF
the main power switch.
3) Turn ON the main pow er switch and the power switch on the
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
2
2
MX-AMX1 GETTING STARTED GUIDE
1
3
Sharpdesk license kit Operation Manual
1
1
2
3
Click on the first or last page to see other MX-2640N / MX-2640NR / MX-2640FN / MX-3140N / MX-3140NR / MX-3140FN / MX-3640N / MX-3640NR / MX-3640FN (serv.man10) service manuals if exist.