Sharp MX-2614N / MX-3114N (serv.man8) Service Manual ▷ View online
MX-3114N MX-PC12/XB16 (PLASMACLUSTER ION GENERATOR/MOUNTING KIT) 24 – 1
MX-3114N
Service Manual
[24] MX-PC12/XB16
(PLASMACLUSTER ION GENERATOR/MOUNTING KIT)
1.
Unpacking
A.
Packed items check
(1)
MX-PC12
(2)
MX-XB16
2.
Installation
Before installation, be sure to turn both the o peration and
main power switches off and disconnect the power plug from
the power outlet. Make double sure that the data lamp on the
operation panel does not light up or blink when performing
installation.
main power switches off and disconnect the power plug from
the power outlet. Make double sure that the data lamp on the
operation panel does not light up or blink when performing
installation.
Do not remove the PCI unit and the Power box unit from the
machine at th e same time beca use their we ight is bi g and
they are not stable.
machine at th e same time beca use their we ight is bi g and
they are not stable.
A.
Fix the adjuster unit.
1) Fix the adjuster blacket (Packed items No.2) at the rear
side of the machine with the screws (Packed items No.7
M4 x 8).
M4 x 8).
2) Fix the adjuster unit (Packed items No.3).
Insert the adjuster unit until it is lecked.
No.
Name
Quantity
1
PCI main unit
1
2
Power box unit support mounting balcke
1
3
RS-232C cable
1
4
Screw (M4 x 8)
1
5
Operation manual
1
No.
Name
Quantity
1
Support mounting blacket unit
1
2
Adjuster blacket
1
3
Adjuster unit
1
4
Support mounting plate
1
5
PCI bottom cover
1
6
Harness cover
1
7
Screw (M4 x 8)
4
8
Step screw A (M4)
1
9
Step screw B (M4)
1
10
Step screw C (M4)
1
11
Screw (M4 x 45)
1
12
Coin screw (M4)
2
1
3
2
4
5
1
6
2
3
4
5
7
8
10
9
11
12
2
1
MX-3114N MX-PC12/XB16 (PLASMACLUSTER ION GENERATOR/MOUNTING KIT) 24 – 2
3) Turn the adjuster to be grounded.
B.
Fix the Support mounting blacket.
1) Cut off the rear cabinet with the knife, etc.
2) Remove the screw at the rear side of the machine.
Then, fix the step screw A (Packed items No.8 M4) and
the step screw B (Packed items No.9 M4) temporarily.
the step screw B (Packed items No.9 M4) temporarily.
3) Attache the RS-232C cable (Packed items No.3) with the
Support mounting blacket unit.
Fit the edge of the tape of RS-232C cable with the edge
of the lib part.
of the lib part.
4) Fix the Support blacket unit with the step screws.
When PCI unit is removed from the machine, the part which
is cut at step 1) is exposed. When the cut part is exposed, fix
the rear cabinet cover which is served as the service parts
not to be exposed.
Rear cabinet cover : GFTA-0026FCZ1
Fixing screw : XHBS730P06000
is cut at step 1) is exposed. When the cut part is exposed, fix
the rear cabinet cover which is served as the service parts
not to be exposed.
Rear cabinet cover : GFTA-0026FCZ1
Fixing screw : XHBS730P06000
C.
Fix the Power box unit.
1) Remove the screw at the rear side of the machine. Con-
nect the cable of the power box unit with the machine.
2) Put the cable of the pow er box unit through the support
mounting blacket unit. Fix the power box unit with the
step screw C (Packed items No.10 M4).
step screw C (Packed items No.10 M4).
2
1
2
1
2
1
2
1
2
2
2
1
MX-3114N MX-PC12/XB16 (PLASMACLUSTER ION GENERATOR/MOUNTING KIT) 24 – 3
D.
Fix the PCI unit.
1) Put the PCI bottom cover through the support mounting
blacket unit. Fix the support mounting plate to the sup-
port mounting blacket unit with the screws (Packed items
No. 11 M4 x 45).
port mounting blacket unit with the screws (Packed items
No. 11 M4 x 45).
2) Fix the PCI main unit to the sup port mounting blacket
unit with the coin screw (Pakced items No.12 M4).
E.
Adjust the tilt of PCI main unit.
1) Fix the coin screw (Pakced items No.12 M4) for adj ust-
ing the tilt of the PCI main unit to the bottom of the PCI
main unit.
main unit.
2) Adjust the tilt of the PCI main unit by tightening or loos-
ening the coin screw.
3) Fix the PCI bottom cover to the PCI main unit after finish-
ing the adjustment.
F.
Connect the RS-232C cable.
1) Remove the cap and connect the RS-232C cable with
the machine.
G.
Connect the cable of the Power box unit.
1) Remove the rear cover of the PCI unit.
2) Fix the snap band of the power unit box cable to the PCI
main unit with th e screw (Packed items No.4 M4 x 8).
Connect the Power unit box cable to with the machi ne.
Then, fix the ferrite core to the power unit box cable.
Connect the Power unit box cable to with the machi ne.
Then, fix the ferrite core to the power unit box cable.
1
2
2
3
1
2
A
B
A
B
1
2
2
1
2
3
4
1
M
X-3114N MX-PC12/XB16 (PLASMACLUSTER ION GENERATOR/MOUNTING KIT) 24 – 4
3) Fix the PCI rear cover.
4) Fix the harness cover (Packed items No.6) with winding
the RS-232C cable and the power box unit cable to the
support mounting blacket unit.
support mounting blacket unit.
H.
Turn ON the power of the main unit
1) Connect the RS-232C cable with the machine.
2) Connect the power plug of the machine to the power
outlet, and turn ON the main power switch an d the
operation panel power switch.
operation panel power switch.
3)
Enter the SIM26-6 [A] mode for the PCI setting and enter the set
value with 1 or 2 to activate the PCI unit.
value with 1 or 2 to activate the PCI unit.
2
1
Click on the first or last page to see other MX-2614N / MX-3114N (serv.man8) service manuals if exist.