Sharp MX-2614N / MX-3114N (serv.man8) Service Manual ▷ View online
MX-3114N MX-AMX3 (EXTERNAL ACCOUNT MODULE) 21 – 1
MX-3114N
Service Manual
[21] MX-AMX3 (EXTERNAL ACCOUNT MODULE)
1. Unpacking
A. Packed items check
2. Installation
A. Enable setting of functions
1)
Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2)
After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
switch on the operation panel of the machine, and turn OFF
the main power switch.
3)
Turn ON the main power switch and the power switch on the
operation panel.
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Operation manual
1
1
2
MX-3114N MX-EB13 (USB WIRELESS LAN ADAPTER) 22 – 1
MX-3114N
Service Manual
[22] MX-EB13 (USB WIRELESS LAN ADAPTER)
1. Unpacking
A. Packed items check
2. Installation
Before installation, turn the operation panel and main power
switches on the main machine OFF and unplug the power cord.
1) Connect the USB wireless LAN adopter to the USB terminal on
the main machine. Always connect it to the USB terminal on
the side or the rear side of the main unit. Never connect it to
the terminal at the front of the operation panel.
2) Reboot the machine.
After connected from the wired LAN to wireless LAN and vice
versa, always reboot the main machine.
3. System Setting Change
A. Simulation setting change
1) Enter SIM26-50.
2) Change the “WIRELESS SET” setting value from “0(NO)” to
2) Change the “WIRELESS SET” setting value from “0(NO)” to
“1(YES)”.
B. Confirmation of function enable
1) Connection Type change
a) Go into the following setting menue mode.
Home -> Settings -> Administrator Login -> Network Set-
tings -> Wireless Settings
b) Set “Connection Type” to “Wireless”.
c) Press [OK] Key.
c) Press [OK] Key.
The following message appeares with [OK] key pressed.
2) Access point registration.
Go into the following setting menue mode.
Home -> Settings -> Administrator Login -> Network Settings -
> Wireless Settings
a) Press [Configure] key.
a) Press [Configure] key.
No.
Name
Quantity
1
USB wireless LAN adapter
1
2
Operation manual
1
3
Safety guide
1
Name of setting
Setting
Available i/F
Connection Type
Switching
Wired Only (Default) Wireless LAN : Disable
Wired LAN : Enable
Wireless (Infrastruc-
ture Mode)
Wireless LAN : Enable (Op-
erable as a cordless hand-
set)
Wired LAN : Disable
Wired + Wireless (Ad-
hoc Mode)
Wireless LAN : Enable (Op-
erable as a cordless hand-
set)
Wired LAN : Enable
MX-3114N MX-EB13 (USB WIRELESS LAN ADAPTER) 22 – 2
b) Change the setting by referring to the table below. .
c) Press [Execute] key.
d)
d)
When the setting is executed, the confirmation screen is
displayed . Press [OK] key.
3) Initiallization.
a) Go into the following setting menue mode.
Home -> Settings -> Administrator Login -> Network Set-
tings -> Wireless Settings
Press [Initialize] key.
b) When the following message appears, press [OK] Key.
C. Confirmation
1) The icon appears if the wireless LAN is enabled.
The detailed settings are displayed by pressing the icon appears at
step 1). The following screen image is the screen when you select
Wired + Wireless (Ad-hoc Mode).
Name
Input value/Key name
SSID
(32 or less characters)
Security type
1. None (default)
2. WEP
3. WPA Personal*
4. WPA Enterprise*
5. WPA2 Personal*
6. WPA2 Enterprise*
Encry.
1.None
2.WEP
[WPA only]
[WPA only]
1. TKIP
2. AES
Security Key
WEP 64bit: 5 characters or 10
hexadecimal digits
WEP 128bit*: 13 characters or 26
hexadecimal digits
WPA/WPA2*: 8-63 characters or 64
hexadecimal digits
Show Security Key
ON (default)
OFF
MX-3114N MX-EB13 (USB WIRELESS LAN ADAPTER) 22 – 3
D. Security Settings
1) Go into the following setting menue mode.
Home -> Administrator Login -> Security Settings ->
IEEE802.1X Setting
IEEE802.1X Setting
2) Press [OK] key.
4. Specification
LED Specification
A. Basic Specification
*The figures indicated are just the theoretical maximum values for
the wireless LAN standard and not the actual data transmission
speeds.
B. Corresponding Protcol
The network access via the USB wireless LAN adopter is sup-
ported by TCP/IP protocol only.
C. Connectable Device
Authentication server with its operation already checked.
Setting Item
Setting Value
Remarks
IEEE802.1X
Authentication
Disable
Enable
Default: Disable
LED
Condition
Operation
LED1
When the wireless is
OFF
Always OFF
When the wireless is
ON but not linked
Flashes (slowly)
When linked
When communicated :
Flashing interval varied due
to the communication status.
When not communicated :
Flashes (slowly)
LED2
When the wireless is
OFF
Always OFF
When the wireless is
ON but not linked
Flashes (fast)
When linked
Always ON
Wireless
LAN Inter-
face
Standard to be complied ARIB STD-T66 (2.4GHz band)
Low electric power Data commu-
nication system standard
Wireless LAN standard protocol
Wireless LAN standard protocol
IEEE802.11n/g/b
Transmission system
OFDM system
(IEEE802.11n/g)
DS-SS system
(IEEE802.11b)
Interface
Comply with USB Revision 2.0
Transmit frequency range
(center frequency)/channel
2,412 to 2,472MHz/1 to 13ch
(IEEE802.11n/g)
2,412 to 2,484MHz/1 to 14ch
(IEEE802.11b)
Transmission speed
(Standard value)*
IEEE802.11n: up to150Mbps
IEEE802.11g: up to 54Mbps
IEEE802.11b: up to 11Mbps
Security
WPA2-PSK(AES)
WPA-PSK(TKIP/AES)
WEP(128/64bit)
WPA-EAP(TKIP/AES)
WPA2-EAP(AES)
EAP corresponding system
EAP-PEAP/EAP-TLS
Power-supply voltage
DC5.0V
(Supplied from USB terminal on
the ‘main machine’)
Power consumption
Up to 1400mW
External dimensions/ weight
64(width)x9.6(depth)x22.5
(height) mm/approx. 11g
System
OS
Radius Server
Microsoft Windows Server 2003
Radius Server
Microsoft Windows Server 2008
Click on the first or last page to see other MX-2614N / MX-3114N (serv.man8) service manuals if exist.