DOWNLOAD Sharp MX-2614N / MX-3114N (serv.man8) Service Manual ↓ Size: 31.51 MB | Pages: 95 in PDF or view online for FREE

MX-3114N  MX-EB16 (PRODUCTIVITY KIT)  23 – 1

MX-3114N

Service Manual

 

When installing a HDD option to a machine which has been used
by a user, the backup procedure of the user data must be per-
formed. 

When installing a HDD option to a machine which has not been
used, the procedure is not required.

1)

Use SIM56-2 to backup the SD card data into a USB memory.

Insert a USB memory to the machine, and enter the SIM56-2
mode. 
Select [EEPROM & SD EXPORT], and press [EXECUTE] key
and then [YES] key. 

When the backup operation is completed, "COMPLETE" is dis-
played. Check to confirm the display.

2)

When the address book has been registered, use the storage
backup function to backup the address book data.

3)

When the home screen of the operation panel has been cus-
tomized, use the device cloning function to backup the SD
card data.

The backup data must be restored to the machine after install-
ing an option HDD.

(Refer to the page of "4. User data restore.")

4)

If there are some FAX/IFAX image data, use SIM66-62 to
backup the image data into a USB memory. Then give the PDF
file to the user.

The FAX/IFAX receive data can be transferred to a USB mem-
ory, but cannot be restored.

Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation. 

1)

Remove the left cabinet.

2)

Remove the shield plate.

1

HDD unit

1

2

Screw (M3 x 6 S-tight)

5

3

Screw (M4 x 10 P-tight)

2

4

SATA cable

1

5

Ferrite core

1

6

Edge saddle

1

7

SD card

1

8

PCL Accelerator Board

1

9

CD-ROM

2

MX-3114N  MX-EB16 (PRODUCTIVITY KIT)  23 – 2

1)

Attach the HDD unit (No.1), and fix the screws ( 2  : No.2 / 
 3   : No.3)  included in the package.

2)

Attach the ferrite core (No.5) to the SATA cable (No.4), and
connect the connector to the HDD.

3)

Attach the edge saddle (No.6) to the LSU mother PWB of the
frame. Connect the connector to the MFP control PWB and
LSU mother PWB.

1)

Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.

2)

Backup the SIM adjustment data in the SD card into the HDD.
Enter the SIM56-11 mode, and press [EXECUTE] key and
[YES] key.

When the backup operation is completed, "COMPLETE" is dis-
played. Check to confirm the display.

3)

Turn OFF the operation panel power switch and the main
power switch.

4)

Remove the MFP control PWB unit.

5)

Replace the black SD card (8GB) installed to the MFP control
PWB with the blue SD card (4GB) (No.7) included in the pack-
age.  

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

&23<'$7$)5206'72+''

(;(&87(

$5(<28685("

<(6

12

MX-3114N  MX-EB16 (PRODUCTIVITY KIT)  23 – 3

1)

Connect the PCL Accelerator Board (No.8) to the MFP control
PWB, and fit it with the screw (No.2) included in the package.

2)

Attach the MFP control PWB unit to the main unit.

3)

Turn ON the main power switch and the operation panel power
switch.

4)

Check to confirm that the machine is booted normally.

Check to confirm that the E7-03 error does not occur.

Wait until the display of "Wait for a while" disappears. 

While "Wait for a while" is displayed, never turn OFF the
power. 

1)

Use SIM22-5 to confirm that the version is displayed in the
firmware and the watermark.

2)

Write the data backed up in the procedure C-2) into the SD
card. 

Enter the SIM56-12 mode, and press [EXECUTE] key and
[YES] key.

When the backup operation is completed, "COMPLETE" is dis-
played. Check to confirm the display.

3)

Use SIM49-1 to upgrade the firmware to the latest version.

4)

Use SIM66-10 to clear the FAX and image send image mem-
ory. (Ensure consistency between the HDD data and the
image data memory.)

1)

Attach the shield plate.

2)

Attach the left cabinet.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

61

,&80$,1

1,&

,&8%227

32:(5&21

,&868%

(0$18$/

/$1*8$*(

:$7(50$5.

*5$3+,&

(6&3

3&/0$,1

3'/

3&/352),/(

3&,

3&8

6&8

)$;0$,1121(

)$;0$,1121(

'(6.121(

),1,6+(5

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

&23<'$7$)520+''726'

(;(&87(

$5(<28685("

<(6

12

MX-3114N  MX-EB16 (PRODUCTIVITY KIT)  23 – 4

When the user data were backed up in the procedure 2, the user
data must be restored. 

When a HDD option is installed to a machine which has been not
used, the procedure is not required.

1)

Use SIM56-2 to restore the data which has been backed up in
the procedure 2-1).

Insert the USB memory into the USB connector in the machine
operation section. Enter the SIM56-2 mode, select
[EEPROM&SD IMPORT] and press [EXECUTE] key and
[YES] key.

When the backup operation is completed, "COMPLETE" is dis-
played. Check to confirm the display.

2)

Use the storage backup function to restore the address book
data backed up in the procedure 2-2).

3)

Use the device cloning function to restore the data backed up
in the procedure 2-2).

1)

Check the machine operations.  
Check to confirm that the copy operation is executed normally.  

1)

Install the driver, and make necessary settings.

2)

Execute SIM22-10 to check to confirm that the “HDD” is not set
as “None” but displayed as “***GB”.   
* The number shown in “***GB” changes depending on the
HDD you use.  

3)

Use SIM46-74 to execute the copy/printer color balance den-
sity adjustment.

Be sure to execute this adjustment.

ǂǂǂ6,08/$7,21ǂǂ12

&/26(

7(67

(;3257,03257),/,1*'$7$

+''(;3257

+'',03257

((3520˂6'(;3257

((3520˂6',03257