Sharp MX-2610N / MX-3110N / MX-3610N (serv.man18) User Manual / Operation Manual ▷ View online
OPERATION GUIDE - READING THE JOB LIST
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-066.htm[24/03/2011 2:56:49 PM]
Index
Contents
"Forward OK"
The received data/received data (each file)
has been forwarded.
"FAST communications in progress"
FAST communications in progress
"Stopped"
The job was stopped.
"Delete"
Deleted received data in the image check
screen.
"Number of successful transmission
destinations/Total destinations OK"
Completion of a broadcast transmission, serial
polling, or inbound routing operation.
If transmission to 3 destinations was
successful out of a total of 5, "003/005 OK"
will appear.
"No response"
An error occurred because there was no
response from the destination.
"Busy"
An error occurred because the other party
was busy.
"OK REPORT"
A "Successful reception" reply received
"NG REPORT"
A "Delivery error" reply received
"NO REPORT"
Delivery Confirmation Receive Timeout
"E-mail received"
E-mail other than Internet fax received
"Rejected"
A fax was sent from a party that has been
blocked by the anti junk fax function.
"NGxxxxxx"
Transmission/reception was not successful
because a communication error occurred (a
6-digit error code appears in xxxxxx.)
"Error"
An error occurred while the job was being
executed.
OPERATION GUIDE- ECO FUNCTIONS
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-067.htm[24/03/2011 2:56:50 PM]
MX-2610N / MX-3110N / MX-3610N
ECO FUNCTIONS
OPERATIONS COMMON TO ALL MODES
These functions help save power consumption by managing operations of sections prone to
high power consumption. The machine provides two power-saving modes.
AUTO
POWER
SHUT-OFF
TIMER
If no operations are taking place, this mode turns off the power to the
operation panel and the fusing unit, and makes the machine wait in the
lowest power consumption state.
Although the power-saving rate is higher, the wakeup time is longer.
PREHEAT
MODE
This mode lowers the temperature of the fusing unit and makes the machine
wait in low power consumption state.
Compared to Auto Power Shut-Off Timer, the power-saving rate is lower, but
the wakeup time is shorter.
In addition to these two modes, using the following functions in conjunction helps reduce even
more power consumption.
Function
Description
AS SOON AS THE
REMOTE JOB IS
FINISHED, ENTER AUTO
POWER SHUT OFF
MODE.
The machine only returns from Auto Power Shut-Off for printing
and enters Auto Power Shut-Off mode as soon as printing is
completed.
ECO SCAN
The machine is operated with the fusing unit turned off for non-
printing operations (that do not use the fusing unit) such as fax
and image transmission.
POWER ON/OFF
SCHEDULING FUNCTION
Use this function to set the times for turning the power on and off
to reduce power consumption.
POWER MANAGEMENT
SETTING
This function performs optimal power management for the use
frequency by analyzing the usage of the machine during a
certain time period.
Priority is given to power on/off scheduling function.
Eco Mode Setting
The eco function settings are set in a batch. "Normal Mode" and "Eco Mode" are available.
Setting values applied by each mode is as follows.
Energy Save
Normal Mode
Eco Mode
Eco Scan
On(Sending
Modes Only)
On(All Modes
Except Copy)
Auto Power Shut-Off Timer
Fixed Time:Off
Fixed
OPERATION GUIDE- ECO FUNCTIONS
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-067.htm[24/03/2011 2:56:50 PM]
Index
Contents
Time:On(1min.)
As soon as the remote job is finished, enter Auto
power shut off mode.
Off
On
Power Management Settings
On
Off
Preheat Mode Setting
1min.
1min.
Panel display during pre-heat mode
On
On
Each Energy Save settings in the System Settings is not applyed when Nomal/Eco mode is
used.
OPERATION GUIDE - ACTION PANEL
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-068.htm[24/03/2011 2:56:50 PM]
MX-2610N / MX-3110N / MX-3610N
ACTION PANEL
Index
Contents
OPERATIONS COMMON TO ALL MODES
This panel displays up to six shortcut keys
for recommended functions that enable you
to use the machine even more conveniently.
Recommended functions displayed vary
according to the operation on the panel.
You can select either display or hide mode
by tapping the relevant tab on the action
panel.
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man18) service manuals if exist.