Sharp DX-B350P / DX-B450P / DX-CSX1 / DX-CSX2 / TEX1 / DX-UX1 / DX-UX4 User Manual / Operation Manual ▷ View online
User’s Guide
2-13
Loading Paper
Getting to Know Your Printer
5. Squeeze the right width guide and slide it to the desired paper size.
6. Fan the paper well.
7.
Load the paper with the side to be printed facing up and all 4 corners aligned. Make sure
the right width guide is correctly aligned with the paper.
the right width guide is correctly aligned with the paper.
NOTE:
Do not load paper exceeding the maximum fill line or the maximum capacity allowed.
Align the right width guide to the paper width. If the right width guide is not in place, the paper will
not be properly fed and may cause a paper jam.
Align the right width guide to the paper width. If the right width guide is not in place, the paper will
not be properly fed and may cause a paper jam.
2-14
User’s Guide
Loading Paper
Getting to Know Your Printer
8. Replace the lid of the paper tray and firmly close the lid.
9. Firmly insert the tray in the printer.
Loading Paper Larger Than A4/Letter Size In The Paper Tray
1. Place the paper tray on a flat surface.
2. Remove the lid of the tray.
3. Slide the right and left lock tabs in the paper tray outwards to unlock them.
User’s Guide
2-15
Replacing the Toner Cartridge
Getting to Know Your Printer
4. Grasp the front of the paper tray and extend it until the right and left lock tabs in the paper
tray move inwards and lock automatically.
5. Squeeze the length guide and slide it to the desired paper size.
6. Squeeze the right width guide and slide it to the desired paper size.
7.
Load the paper with the side to be printed facing up and with all 4 corners aligned.
8. Close the lid of the paper tray.
9. Push the paper tray firmly into the printer.
Replacing the Toner Cartridge
The Toner Cartridge should be replaced when it reaches the end of its print life. The Toner
Cartridge prints up to 18K (DX-B350P)/ 21K (DX-B450P) images. The printer will produce a
warning on the Operator Panel to inform you when the remaining toner amount is low. You can
press START/STOP to continue printing with low toner.
Cartridge prints up to 18K (DX-B350P)/ 21K (DX-B450P) images. The printer will produce a
warning on the Operator Panel to inform you when the remaining toner amount is low. You can
press START/STOP to continue printing with low toner.
When installing the Toner Cartridge, take note of the following:
•
Do not subject it to direct sunlight or strong light.
•
Do not touch the surface of the photosensitive drum.
•
Do not stand or place the Toner Cartridge upside down. The drum might get damaged.
2-16
User’s Guide
Replacing the Toner Cartridge
Getting to Know Your Printer
1. Open the top cover and remove the empty Toner Cartridge.
2. Take the Toner Cartridge out of the box and shake it 7 to 8 times as shown in the diagram.
3. Place the Toner Cartridge on a flat surface and pull the seal out horizontally. Note that the
seal may offer resistance and a firm pull may be necessary to extract it from the Toner
Cartridge.
Cartridge.
NOTE:
When pulling out the seal, pull it out horizontally. The tape might break if it is pulled out diagonally.
After the seal has been pulled out, do not shake or bump the Toner Cartridge.
After the seal has been pulled out, do not shake or bump the Toner Cartridge.
Click on the first or last page to see other DX-B350P / DX-B450P / DX-CSX1 / DX-CSX2 / TEX1 / DX-UX1 / DX-UX4 service manuals if exist.